• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.325-331
• /
• 1999

계통연계형 태양광발전시스템에서는 계통과 태양광시스템을 연계하기 위해 PWM 인버터가 이용된다. 인버터 시스템을 연속전류모드로 운전하면 맥동이 발생하게 되고, 직류전류의 맥동발생은 교류전류파형의 왜형을 가져온다. 본 연구에서는 직류입력전류의 맥동을 감소시키기 위하여 불연속모드 승강압초퍼로 인버터를 운전한다. 직류 전류에 포함된 고조파성분을 리플성분과 직류성분으로 분리하여 해석하고, 맥동이 없는 일정한 직류전류를 태양 전지로부터 인버터로 공급한다. 제안하는 인버터시스템은 단위 역률로 부하와 계통에 교류전류를 공급한다.

• 한국안전학회지
• /
• 제23권3호
• /
• pp.87-92
• /
• 2008

시간에 불연속성인 유한요소법이 열전도 방정식에 적용하였다. 근사값은 고정된 시간에 공간변수에는 연속이며 그러나 각 시간 구간에서는 시간변수에 불연속을 허용하였다. 이 유한요소법은 지금까지 많이 알려진 재래식 유한요소해석에 보다 해의 수렴속도가 빠르고 해를 쉽게 얻을 수 있으며 지반이 동결된 동상지반과 같이 복잡한 공학문제와 같은 동적 경계치 문제에 쉽게 접근할 수 있었다. 다차원 문제에도 적용이 가능하며 본 연구에서는 일차원, 이차원 열전도 문제에 적용하였다. 결과 치를 해석해와 비교 검토하였다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.1-11
• /
• 2016

Considerable efforts are required to develop a monotone, robust and stable high-order numerical scheme for solving the hyperbolic system. The discontinuous Galerkin(DG) method is a natural choice, but elimination of the spurious oscillations from the high-order solutions demands a new development of proper limiters for the DG method. There are several available limiters for controlling or removing unphysical oscillations from the high-order approximate solution; however, very few studies were directed to analyze the exact role of the limiters in the hyperbolic systems. In this study, the performance of the several well-known limiters is examined by comparing the high-order($p^1$, $p^2$, and $p^3$) approximate solutions with the exact solutions. It is shown that the accuracy of the limiter is in general problem-dependent, although the Hermite WENO limiter and maximum principle limiter perform better than the TVD and generalized moment limiters for most of the test cases. It is also shown that application of the troubled cell indicators may improve the accuracy of the limiters under some specific conditions.

• 열처리공학회지
• /
• 제33권4호
• /
• pp.173-179
• /
• 2020

The purpose of this study was to investigate comparatively the microstructural characteristics and hardness of discontinuous precipitates (DPs) in Mg-9%Al alloy, which were formed by continuous cooling (CC) from 678 K to RT and isothermal aging (IA) at 413 K, respectively. In as-cast state, the Mg-9%Al alloy consisted of partially divorced eutectic β(Mg₁₇Al₁₂) particles with a small amount of DPs showing (α+β) lamellar morphology adjacent to the β particles. The DPs formed by CC had interlamellar spacings in a broad range of 0.85~2.12 ㎛ (1.51 ㎛ in average) owing to the various formation temperatures in response to continuous cooling process. Meanwhile, the DPs formed by IA had relatively narrower interlamellar spacings of 0.14~0.29 ㎛ (0.21 ㎛ in average), which is associated with the low and constant formation temperature. Thinner and higher volume fraction of β phase layers were noticeable in the DPs formed by IA. Higher hardness values were obtained in the DPs formed by IA than the DPs formed by CC, which may well be ascribed to the finer lamellar structure and higher β phase content of the DPs formed by IA.

• Journal of Biosystems Engineering
• /
• 제23권5호
• /
• pp.481-490
• /
• 1998

A computer vision system to measure low flow rate of solid particles was developed and tested to examine its performance with various sized 7 kinds of seeds, perilla, mung bean, paddy, small red bean, black soybean, Cuba bean and small potato tuber. The test was performed for two types of particle flow, continuous and discontinuous. For the continuous flow tested with perilla, mung bean and paddy, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method about 0.98. Average errors of the computer vision measurement were in a range of 6∼9%. For the discontinuous flow tested with small red bean, black soybean, Cuba bean and small potato tuber, the tests resulted correlation coefficients for the flow rates measured by the computer vision and direct method 0.98∼0.99. Average errors of the computer vision measurement were in a range of 5∼10%. Performance of the computer vision system was compared with that of the conventional optical sensor to count particles in discontinuous flow. The comparison was done with black soybean, Cuba bean and small potato tuber, and resulted that the computer vision has much better performance than the optical sensor in a sense of precision of the measurement.

• 터널과지하공간
• /
• 제15권4호
• /
• pp.305-315
• /
• 2005

불연속 변형해석은 에너지 최소화원리를 이용하여 전체 행렬을 구성하는 유한요소법과 개별블록의 대변위를 모사할 수 있는 개별요소법의 장점을 모두 가지고 있는 해석법이다. 이 연구에서는 불연속 변형해석에서 해석결과에 문제점이 있는 접촉문제를 개선하는 시도로써 불연속 변형해석에서 정의하는 접촉 중 선-선 접촉을 해석하는 새로운 기법을 적용하였다. 이를 위해 접촉쌍의 개념을 이용하여 새로운 7 가지의 선-선 접촉의 상태를 정의하고 이에 따른 새로운 전단거동 결정 방법과 개폐수렴반복해석에서의 수렴조건, 접촉찾기 등의 세부알고리듬을 제시하였다. 또한 블록간의 접촉에 의해 작용하는 마찰력을 기존의 점하중 형태에서 선하중의 형태로 개선하는 식을 유도하여 새 알고리듬에 적용하였다.

• 열처리공학회지
• /
• 제33권5호
• /
• pp.219-225
• /
• 2020

The objective of this study was to investigate the tensile properties and thermal conductivities of Mg9.3%Al alloy in as-cast state and heat-treated state consisting of fully discontinuous precipitates (DPs), respectively. The fully DPs microstructure was obtained by solution treatment at 405℃ for 24 h, followed by furnace cooling to RT. The as-cast alloy showed a partially divorced eutectic β(Mg₁₇Al₁₂) phase particles formed along the α-(Mg) cell boundaries. The DPs had various apparent (α+β) interlamellar spacings, which is related to different transformation temperatures during the furnace cooling. The DPs microstructure exhibited better tensile strength than the as-cast one, resulting from the higher value of elongation in response to its more homogeneous microstructure. It is noticeable that the DPs microstructure had 12.4% higher thermal conductivity in average than the as-cast one between RT and 200℃. The XRD analyses revealed that the lower Al concentration in the α-(Mg) matrix may well be responsible for the better thermal conductivity of the DPs microstructure.

• 한국통신학회논문지
• /
• 제17권5호
• /
• pp.460-471
• /
• 1992

본 논문에서는 최근에 주로 사용되는 디지털 PLL중 Tri-State 방식과 sample-Hold 방식을 사용한 PLL루프의 시간 불연속 동작을 묘사하기 위한 새로운 모델을 설정하여 비선형 PLL의 안정도 해석을 Z영역에서 하였으며 과도응답을 구하기 위한 상태방정식을 유도하였다. 종래에는 디지털 PLL의 시간 불연속 동작을 시간 연속 동작으로 근사화 시켜 선형적 해석을 하므로써 실제로는 시간 불연속 동작을 하는 디지털 PLL의 불안정한 영역을 정확히 찾아내지 못하였으나 새로운 모델에 의한 Z영역에서의 해석에서는 시간연속 해석에서 발견할 수 없었던 불안정 영역을 밝혀냄으로써 디지털 PLL의 최적 설계가 가능하도록 루프계수의 한계를 구하였다.

• 가정과삶의질연구
• /
• 제7권2호
• /
• pp.61-70
• /
• 1989

The present study investigated characteristics of Korean hourehelds in the expanding stage of the family life cycle depending on decision-making of current and planned credit card use. Households which were selected for this study had at least one dependent child enrolled in primary, middle, or high school, 1998. Regarding current and planned credit card use, credit card holder (n=379) and non-holder (n=259) households and continuous (n=331) and discontinous (n=47) credit card holder households were compared. Comparisons were perfomed by t-test, one-way ANOVA, and X2-test. Related factors were households demographic characteristics, financial management behavior, perceived financial well-being, and attitudes toward credit cards. Findings indicated that holder households tended to be younger, better educated, white-collar workers, and of a higher economic status than non-holders. In comparison to non-holder households, credit card holder households had more favorable atti udes toward credit cards, reported more financial management practices, experienced less financial unbalance, and were more satisfied with their household finaces. Compared to discontinuous credit card holder households, continuous card holder households tended to be larger, have better educated wives and husbands, and have husbands who were white-collar workers. They were more likely to have higher average monthly income than discontinuous holder households. Continuous card holder households also had more favorable attitudes toward credit cards, and more strongly believed and expected financial improvement of their households, compared to discontinuous card holder households.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.537-543
• /
• 2013

본 논문에서는 불연속 주파수 변조 기법을 사용하는 낮은 EMI 분산 스펙트럼 클록 발생기 (SSCG)를 제안한다. 제안된 SSCG는 높은 변조폭을 갖는 삼각 주파수 변조 기법을 사용한다. SSCG의 최대 시간 구간 오차 (MTIE)가 제한 기준을 넘어서면 SSCG의 출력 주파수가 분주기를 거쳐 시간 구간 오차 (TIE)의 값을 감소시킨다. 이러한 불연속 주파수 변조 기법은 주어진 MTIE 제한 기준 내에서 전자기 방사를 효과적으로 감소시킬 수 있다. 이 방법은 일반적인 SSCG보다 전자기 방사를 18.5dB 더 개선하였다.