• Journal of Korean Society of Steel Construction
• /
• v.25 no.6
• /
• pp.601-612
• /
• 2013

In the present study, details of the TSC beam-to-PSRC column connection for low and middle seismic zones were developed. For ease construction, the top and bottom flanges of the steel section of the TSC beam were discontinuous at the joint face on purpose, while the web passes through the joint. Thus, tensile resistance of the top and bottom flanges is not considered in the calculation of nominal strength of the connection. Cyclic loading tests on two interior connections and an exterior connection were performed to verify the seismic performance. The test parameter for two interior connections was the depth of the TSC beams: 600 and 700 mm including the slab depth. The test results showed that the nominal strength of the connections predicted by KBC 2009 correlated well with the test results. The connection specimens exhibited relatively good deformation and energy dissipation capacities, greater than the requirements for the ordinary and intermediate moment frames. Ultimately, the connection specimens were failed at the story drift ratios of 3.0 to 4.0 % due to local buckling and tensile fracture of the web of the TSC beam passing through the joint. By modifying the existing provisions of ASCE, the joint shear strength of the TSC beam-PSRC column connection was evaluated.

• Economic and Environmental Geology
• /
• v.30 no.5
• /
• pp.477-491
• /
• 1997

In the Bibong area of the western part of Chungcheongnam-do, ultramafic masses occur as discontinuous isolated lenticular bodies in the Precambrian Kyeonggi gneiss complex. They extend for about 200 m long to NNE directions which are parallel to fault lines in the gneiss complex. The ultramafic masses contact with the adjacent gneiss complex as steeply dipping faults. They are dunites and harzburgites and many of them are partially or completely serpentinized. The ultramafic rocks dominantly show protogranular, equigranular and equigranular-$m{\grave{o}}saic$ textures. They also show porphyroclastic (megacrystic) or recrystallized textures reflecting several stages of metamorphism. They contain varying amounts of olivine $(Fo_{89-92})$, enstatitic to bronzitic orthopyroxene, diopsidic clinopyroxene, tremolitic to pargasitic hornblende, and spinel with serpentine, talc, chlorite, calcite and magnetite. The ultramafic rocks have high magnesium numbers and transitional element contents, low alkali contents and show deplete REE patterns. Comparing with available data, geochemical and mineralogical characteristics shown in the ultramafic rocks of the Bibong area are similar to those of worldwide mantle xenoliths and orogenic related ultramafic rocks. The field evidences, petrographical, geochemical and mineralogical characteristics shown in the ultramafic rocks of the Bibong area are similar to alpine type ultramafic rocks emplaced into the crust by the faulting as mantle slab types. With the petrographical characteristics, these mineralogical compositions suggest that the ultramafic rocks of the Bibong area have experienced several stages of retrogressive metamorphism in a condition ranging from the upper amphibolite facies to greenschist facies.

• Economic and Environmental Geology
• /
• v.29 no.2
• /
• pp.129-138
• /
• 1996

The ores of the Bobae mine are mainly composed of sericite and quartz, and with appreciable amount of some other minerals such as andalusite. pyrophyllite, and albite, etc.. Sericite occurs in various a1teration zones having different crystal size and habit. Sericites can be c1assified into two types based on the crystal size; fine-grained and coarse-grained sericite. Fine-grained sericite occurs as an aggregate. Mineralogical characterizations of both types of sericites have been studied with various methods. Lattice parameters of two types of sericites occurred in various alteration zones are almost identical. but b parameter of coarse-grained sericite appears to be slight1y bigger than that of fine-grained aggregates. Average structural formula of fine- and coarse-grained sericite is $K_{1.44}Al_{3.86}(Si_{6.35}Al_{1.65})O_{20}(OH)_4$ and $K_{1.71}Al_{3.82}(Si_{6.20}Al_{1.80})O_{20}(OH)_4$, respectively. Structural formulae of coarse-grained sericites are close to that of muscovite. Infrared spectra show that there is slight distinction between sericites occurred in andalusite-pyrophyllite zone and other subzones. IR spectra of sericites due to Si-O vibration ($540{\sim}530cm^{-1}$) tend to shift to smaller wavenumber side from center to outer alteration zone. All samples have litt1e or no interstratified minerals. and this is demonstrated by Ir and DTA-TG results. It indicates that the Bobae mine is formed at relatively high temperature. That the ratio of quartz to sericite in ores varies greatly indicates that several discontinuous hydrothermal alteration processes have been involved.

• Journal of Conservation Science
• /
• v.17 s.17
• /
• pp.83-94
• /
• 2005

Host rock or the standing sculptured Buddha in the Yongamsa temple is macular porphyritic biotite granite, which has gone through mechanical and chemical weathering. The rock around the Buddha statue is busily scattered with steep inclinations that are almost vertically discontinuous planes with the strikes of $N8^{\circ}E$. Especially the development of the joints that cross the major joints causes the structural instability of the rock. The rock of the Buddha statue is separated into several rock blocks because of many different discontinuity. Thus it is estimated that the bed rock has not only plane and toppling failure but also wedge failure in all the sides. Since the differential pressure is imposed on the body of the Buddha in the host rock, it is urgent to give a reinforce treatment of geotechnical engineering for the safe of its structural stability. Very contact area of joints have turned into soil, which promotes the growth of weeds and plant roots, then aggravates the mechanical weathering of the rock. Thus conservational treatments should also be considered to get rid of secondary contaminants and vegetation along the discontinuities and to prevent further damages.

• The Korean Journal of Physiology and Pharmacology
• /
• v.2 no.1
• /
• pp.119-131
• /
• 1998

It has been reported that the glycoprotein extracted from Aloe has strong anti-inflammatory response. However, there has been no research report yet about the effect of Aloe on allergic hypersensitivity reactivity. By using guinea pig lung mast cells, this study aimed to examine the effects of Aloe glycoprotein (NY945) on the mediator releases caused by mast cell activation, and also aimed to assess the effects of NY945 on the mechanism of mediator releases in the mast cell activation. We partially purified mast cell from guinea pig lung tissues by using the enzyme digestion, the rough and the discontinuous density percoll gradient method. Mast cells were sensitized with IgG1 (anti-OA) and challenged with ovalbumin. Histamine was assayed by fluorometric analyzer, leukotrienes by radioimmunoassay. The phospholipase D activity was assessed by the production of labeled phosphatidylalcohol. The amount of mass 1, 2-diacylglycerol (DAG) was measured by the $[^3H]DAG$ produced when prelabeled with $[^3H]myristic$ acid. The phospholipid methylation was assessed by measuring the incorporation of the $[^3H]methyl$ moiety into phospholipids of cellular membranes. Pretreatment of NY945 (10 ${\mu}g$) significantly decreased histamine and leukotrienes releases during mast cell activation. The decrease of histamine release was stronger than that of leukotriene during mast cell activation. The phospholipase D activity increased by the mast cell activation was decreased by the dose-dependent manner in the pretreatment of NY945. The amount of DAG produced by PLC activity was decreased by NY945 pretreatment. The amount of mass 1, 2-diacylglycerol produced by activation of mast cells was decreased in the pretreatment of NY945. NY945 pretreatment strongly inhibited the incorporation of the $[^3H]methyl$ moiety into phospholipids. The data suggest that NY945 purified from Aloe inhibits in part an increase of 1, 2-diacylglycerol which is produced by activating mast cells with antigen-antibody reactions, which is mediated via phosphatidylcholine-phospholipase D and phosphatidylinositol-phospholipase C systems, and then followed by the inhibition of histamine release. Furthermore, NY945 reduces the production of phosphatidylcholine by inhibiting the methyltransferase I and II, which decreases the conversion of phosphatidylcholine into arachidonic acid and inhibits the production of leukotrienes.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.16-23
• /
• 2006

This paper presents a novel single-stage high frequency resonant inverter link type DC-DC converter using zero voltage switching with high power-factor. The proposed topology is integrated half-bridge boost rectifier as power factor corrector(PFC) and half-bridge high frequency resonant converter into a single-stage. The input stage of the half-bridge boost rectifier works in discontinuous conduction mode(DCM) with constant duty cycle and variable switching frequency. So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. Simulation results have demonstrated the feasibility of the proposed high frequency resonant converter. Characteristics values based on characteristics analysis through circuit analysis is given as basis data in design procedure. Also, experimental results are presented to verify theoretical discussion. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.2
• /
• pp.235-253
• /
• 2018

Groundwater flow induced by cracks in a buried pipe causes ground loss in the vicinity of it which can lead to underground cavities and sinkhole problems. In this study, the ground collapse mechanism and the failure mode based on an aperture in the pipe located in cohesionless ground were investigated through a series of physical model studies. As the influence parameters, size of the crack, flow velocity in the pipe, groundwater level, ground cover depth and ground composition were adopted in order to examine how each of the parameters affected the behavior of the ground collapse. Influence of every experimental condition was evaluated by the final shape of ground failure (failure mode) and the amount of ground loss. According to the results, the failure mode appeared to be a 'Y' shape which featured a discontinuous change of the angle of erosion when a groundwater level was equal to the height of the ground depth. While in the case of a water table getting higher than the level of ground cover depth, the shape of the failure mode turned to be a 'V' shape that had a constant erosion angle. As the height of the ground depth increased, it was revealed that a mechanism where a vertically collapsed area which consisted of a width proportional to the ground height and a constant length occurred was repeated.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.437-444
• /
• 2020

This study was focused on the stabilization of surge motions of a moored vessel under irregular head seas. A two-point moored vessel shows strong non-linearity even in regular sea, owing to its inherent non-linear restoring force. A long-crested irregular wave is subjected to the vessel system, resulting in more complex nonlinear behavior of the displacement and velocities than in the case of regular waves. Sliding mode control (SMC) is implemented in the moored vessel to control both surge displacement and surge velocity. The SMC can provide a closed-loop system with performance and robustness against parameter uncertainties and disturbances; however, chattering is the main drawback for implementing SMC. The goal of minimizing the chattering and state convergence with accuracy is achieved using a quasi-sliding mode that approximates the discontinuous function via a continuous sigmoid function. Numerical simulations were conducted to validate the effectiveness of the proposed control algorithm.

• Journal of Nutrition and Health
• /
• v.24 no.4
• /
• pp.356-365
• /
• 1991

$L-Triiodothyronine(T_3)$ binding to purified plasma membrane and to isolated nuclei from the same liver in obese(ob/ob) mice and their lean littermates was examined. The maximal binding capacity(Bmax) for $T_3$ receptor of liver nuclei, as compared to lean control, was significantly lower in the obese mouse$(obese 527{\pm}80fmol/mg\;DNA ; lean 883{\pm}62fmol/mg\;DNA)$, without an apparent difference in dissociation constant(Kd). The finding that obese mice have fewer liver nuclear $T_3$ receptors confirms previous reports. The Bmax and Kd of liver plasma membrane $T_3$ receptor were not significantly different between obese and lean mouse, which suggests no defect to be occurring in the function of the plasma membrane $T_3$ receptor and reinforces the view that the peripherally impaired thyroid hormone action in obese mice is a post plasma membrane receptor event. These results further support the hypothesis that the major defect of the thyroid hormone metabolism in genetic obesity occurs at the level of the nuclear receptor.

• Geophysics and Geophysical Exploration
• /
• v.2 no.2
• /
• pp.86-95
• /
• 1999

This paper presents an efficient three-dimensional (3-D) modeling algorithm using the extended approximation to an electric field integral equation. Numerical evaluations of Green's tensor integral are performed in the spatial wavenumber domain. This approach makes it possible to reduce computing time, to handle smoothly varying conductivity model and to remove singularity problems encountered in the integration of Green's tensor at a source point. The responses obtained by 3-D modeling algorithm developed in this study are compared with those by the full integral equation for a thin-sheet EM scattering. The extensive analyses on the performance of modeling algorithm are made with the conductivity contrasts and source frequencies. These results show that the modeling algorithm are accurate up to the conductivity contrast of 1:16 and the frequency range of 100 Hz-100 kHz. The extended Born approximation, however, may produce inaccurate results for some source and model configurations in which the electric field is discontinuous across the conductivity boundary. We performed the modeling of a composite model of which conductivity varies continuously and this shows the modeling algorithm developed in this study is efficient for 3-D EM modeling. For a cross-hole source-receiver configuration a composite model of which conductivity varies continuously can be successfully simulated using this algorithm.