• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.412-417
• /
• 2005

To ensure the safety of the tunnelling without the loss of economy, the tunnel seismic profiling(TSP) method for the prediction ahead of tunnel face, begins to be used routinely in these days. TSP method does not interfere the tunnelling works while the horizontal drilling does, and its prediction length is longer than that of the drilling. Yet the most frequently adopted technique of TSP in Korea is the multi-shot and 2 receiver array using in-hole receivers, even though this array requires as many as 26 drill-holes for receiver installation and ballasting, which results in 3-6 hours of suspension in excavation work. In this paper, multi-receiver and lesser shot array using side-wall attached 3 component geophones is to be described to prove the efficiency in terms of the survey time as well as the reliability of the method by comparison of the predicted weak points and the face mapping results. The predictions mostly agreed with the real fractures or joint developed zones which have been confirmed during the excavation. It also has been found that TSP method can be effectively applied to perform draining ground water ahead of tunnel face by imaging the geologic discontinuities.

• 지질공학
• /
• 제11권2호
• /
• pp.205-214
• /
• 2001

암반 절취면에 분포하는 면과 선구조를 원격으로 측정하는 단순 장치를 소개한다. 지질구조의 배열은 구조면이나 선분상에 존재하는 3개 이상의 점에 대한 3차원 좌표를 이용하여 계산된다. 좌표들은 두 폐쇄회로 카메라의 영상에서 계산되며, 계산에 활용되는 변수들은 (1) 영상에서의 동일지점에 대한 좌표 (2) 카메라의 초점거리 (3) 두 카메라의 기선거리 이다. 영상측량을 위하여 영상 획득을 위한 장치와 Visual Baisc 언어와 GIS 콤퍼넌트를 이용한 전산 프로그램이 개발되었다. 개발된 방법을 이용한 측정결과 179cm의 거리에서 원격으로 측정된자료가 1cm 이하의 오차를 보이고 있다. 원격측정법을 이용하여 배재대학 교내의 암반 절취면에 분포하는 면구조를 측정한 결과 수작업으로 측정한 면의 배열방향과 허용 오차범위 이내에서 일치하는 결과를 보이고 있다.

• 보건의료산업학회지
• /
• 제6권4호
• /
• pp.219-229
• /
• 2012

This study aimed to explore influencing factors on the establishment of the network system between public hospitals and to make a process evaluation of it. we analyzed the case of a strategic alliance contracted by a National University Hospital(NUH) and a Community Hospital(CH). Main points of the project were regular dispatch of clinical specialists in the NUH such as gastroenterologist and running teleradiology program. The NUH considered the improvement of it's image as a public hospital as a successful element of the network program. The provincial office which have to manage the CH satisfied with these program in terms of helping CH in need of clinical specialists. Staffs in the CH pointed out the problem of discontinuity for patients who visited the CH. Three institutes argued that continuous support of central government in the relevant institution and budget could play the most important role in the advance of the network system between public hospitals.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.295-305
• /
• 2019

The bedding plane has a significant influence on the effect of blasting fragmentation and the overall performance of underground mining. This paper explores the effects of fragmentation of the bedding plane and different angles by using the numerical analysis. ANSYS/LS-DYNA code was used for the implementation of the models. The models include a dynamic compressive and tensile failure which is applied to simulate the fractures generated by the explosion. Firstly, the cracks propagation with the non-bedding plane in the coal with two boreholes detonated simultaneously is calculated and the particle velocity and maximum principal stress at different points from the borehole are also discussed. Secondly, different delay times between the two boreholes are calculated to explore its effects on the propagation of the fractures. The results indicate that the coal around the right borehole is broken more fully and the range of the cracks propagation expanded with the delay time increases. The peak particle velocity decreases first and then increases with the distance from the right borehole increasing. Thirdly, different angles between the bedding plane and the centerline of the two boreholes and the transmission coefficient of stress wave at a bedding plane are considered. The results indicated that with the angles increase, the number of the fractures decreases while the transmission coefficient increases.

• 대한토목학회논문집
• /
• 제28권1A호
• /
• pp.89-94
• /
• 2008

서로 다른 부재로 이루어진 혼합구조물은 불연속면인 접합부에 강도저감, 응력집중이 발생하거나 응력전달이 확실하지 않게 되므로 접합부에 대한 연구는 이미 오래전부터 다양한 방법을 통하여 연구되어 왔다. 특히 최근에 장대교량에 혼합구조를 적용하면, 경제성과 시공성이 확보되고 구조적 성능이 증가하는 것으로 알려지면서 일본, 유럽 등과 같은 선진국에서 혼합구조의 연구 및 시공이 활발히 이루어지고 있는 실정이다. 하지만 이에 대한 국내의 연구는 상대적으로 미미한 수준에 있다. 따라서 본 논문에서는 전술한 혼합구조의 접합부가 구조물 전체에 미치는 영향을 분석하기 위하여 기존에 수행된 많은 연구결과를 검토하고, 현재 가장 널리 사용되고 있는 전후면판 방식의 접합부를 갖는 혼합구조의 비선형 해석을 수행하여 그 장단점을 파악하였다. 또한, 이를 기초로 혼합구조 접합부의 성능을 개선할 수 있는 접합부 방식를 제안하고, 이를 기존의 방식과 비교분석하기 위하여 객관적인 6개의 기준을 설정하여 분석하였다. 개선된 모형으로는 형태를 개선안 모형 2개와 불연속면을 보강한 모형 1개 총 3개의 개선모형를 설정하였으며, 객관적인 비교기준으로 하중-처짐관계, 처짐곡선분포, 개구폭, 스터드축력, 소성변형 크기 및 위치, 접합부 응력분포 등을 설정하였다. 이와 같은 기준에 따라 기존 접합부 방식과 개선된 방식을 서로 비교검토한 결과, 본 논문에서 제안한 접합부 방식이 구조물의 성능개선에 큰 효과가 있는 것으로 나타났으므로 혼합구조의 새로운 접합부 방식으로 제안하였다.

• 대한토목학회논문집
• /
• 제12권4호
• /
• pp.81-93
• /
• 1992

무한 및 반무한 경계조건을 가진 지하구조체에 대하여 개별요소법과 경계요소법을 조합하여 해석하는 방법을 제안하였다. 일반적으로 무한 또는 반무한 경계를 가지는 지하구조체의 문제에 있어서 응력집중부, 굴착면 혹은 불연속면이 발달되어 있는 영역을 개별요소로 모형화하고 무한 영역은 선형경계요소를 사용하여 모형화 하였다. 여기서, 선형경계요소에 의한 무한 및 반무한 영역의 고려는 Kelvin의 무한 영역, Melan의 반무한 영역에서의 해로 구성하였다. 효율적인 해석을 위하여 선형 경계요소법, 개별요소법, 개별요소와 경계요소 조합방법 등이 독립적으로 연구되었다. 연구된 각 방법에 근거하여 조합된 해석방법을 무한 및 반무한 문제에 적용하여 기존의 이론해석치와 비교하여 검증을 실시하고, 지하구조체에 적용하여 조합해석방법의 실용성을 보였다. 따라서, 지하구조체에 조합방법을 사용하면 지반의 불연속 조건과 경계조건에 따르는 구조물의 거동을 합리적으로 예측할 수 있으며, 개별요소와 경계요소의 장점을 살려 보다 합리적인 해석의 수행이 가능할 것으로 판단된다.

• 암석학회지
• /
• 제14권3호
• /
• pp.180-190
• /
• 2005

경상남도 합천군에 건설 중인 도로사면에 당초 설계와는 다른 암질 및 불연속면이 분포하고 있다. 따라서 당초 설계와는 달리 소규모 산사태가 발생되어 정상적인 공사추진에 애로사항이 있으므로, 현장조사 및 실내작업을 통하여 지정된 사면에 대한 전체적인 지질공학적인 분석을 하는 것이 본 연구의 목적이다. 이를 위해 측량, 슈미트해머(Schimidt Hammer) 시험, 불연속면 조사를 시행하였고 실내에서 DIPS 프로그램을 이용하여 사면의 안정성을 분석하였다. 분석결과, 평면, 전도 및 쐐기파괴의 가능성이 있으며 용출수가 집중되는 곳이 있으므로 이에 대한 보강 공사가 요구되고 있다.

• 자원환경지질
• /
• 제20권3호
• /
• pp.203-209
• /
• 1987

The gravity measurement has been conducted at 69 points with an interval of about 1km along the national road between Masan and Busan through Kimhae to study on the subsurface geology and structure of Kyongsang basin. The Bouguer gravity anomalies were obtained from the observed gravity values, and interpreted by means of the Fourier-series method and Talwani method for 2-dimensional body. The depth of Conrad discontinuity is about 14.8km at the west end of survey line, and increases smoothly to about 13.6km at the east end. But it is uplifted by about 500m between Yangsan and Dongnae faults. The depth of the basement of Kyongsang basin is about 4.8km at the west end. It decreases gradually passing Masan, and reaches the maximum depth of 5.6km at the 15km east of Masan. Hereafter, it starts to increase to 4.3km at the east end. It is also uplifted by about 500m between Yangsan and Dongnae faults. The Bulgugsa granites which cause two low Bouguer gravity anomaly zones are distributed in the vicinity of Masan at depth of about 3.5km and Kimhae area at depth of about 5.3km. Diorite, granodiorite, aplite, and felsite are distributed with various depth of about 1~1.7km, and Jusasan andesitic rocks, except porphyritic one located at the west of Kimhae, are distributed with depth of about 1km. Three fracture zones associated with faults are located at the places where v-shaped Bouguer gravity anomalies are appeared.

• Steel and Composite Structures
• /
• 제37권6호
• /
• pp.663-678
• /
• 2020

This paper proposes a novel topology optimization method generating multiple materials for external linear plane crack structures based on the combination of IsoGeometric Analysis (IGA) and eXtended Finite Element Method (X-FEM). A so-called eXtended IsoGeometric Analysis (X-IGA) is derived for a mechanical description of a strong discontinuity state's continuous boundaries through the inherited special properties of X-FEM. In X-IGA, control points and patches play the same role with nodes and sub-domains in the finite element method. While being similar to X-FEM, enrichment functions are added to finite element approximation without any mesh generation. The geometry of structures based on basic functions of Non-Uniform Rational B-Splines (NURBS) provides accurate and reliable results. Moreover, the basis function to define the geometry becomes a systematic p-refinement to control the field approximation order without altering the geometry or its parameterization. The accuracy of analytical solutions of X-IGA for the crack problem, which is superior to a conventional X-FEM, guarantees the reliability of the optimal multi-material retrofitting against external cracks through using topology optimization. Topology optimization is applied to the minimal compliance design of two-dimensional plane linear cracked structures retrofitted by multiple distinct materials to prevent the propagation of the present crack pattern. The alternating active-phase algorithm with optimality criteria-based algorithms is employed to update design variables of element densities. Numerical results under different lengths, positions, and angles of given cracks verify the proposed method's efficiency and feasibility in using X-IGA compared to a conventional X-FEM.

• 영어영문학
• /
• 제56권6호
• /
• pp.1361-1378
• /
• 2010

This paper argues that it is possible to construct an analogy of the literary fragment to an organic individual on the basis of an autonomous system of organic unity by reading William Wordsworth's ways of self-writing in The Prelude. The organicity of a fragment is borrowed from Friedrich Schlegel's theoretic and literary approach to the Romantic fragment. Focusing primarily on the two "spots of time" in Book Twelfth, I attempt to formulate a reciprocal relationship between a work of art and a literary autobiographer in terms of the self-generativity of the fragment. To be precise, both the fragment and the autobiographical project presuppose and at the same time depend on the engendering force of an organic unity and its resistance to discontinuity, which ironically affirms the persistent threat of disruption and death. Rewriting traumatic childhood experiences as rites of passage into adulthood, the two specified "spots of time" show the dominant mode of memory operative in the poem. Asserting the prominence of the individual as the very vehicle of realizing universal humanity, Wordsworth tries to re-form his individuality grounded in his childhood memories in a literary fashion. Under the premise that the poet is remembered by his posterity, The Prelude is constituted and reconstituted in conjunction with different versions of each memory. The poem also marks the poet's unachieved project of writing a philosophical poem, namely, The Recluse; for this very reason, The Prelude, which is complete in itself, points to an eternal work in progress, turning the truth of every fragment complete in its incompletion. As a trope of fragmentation, an autobiographical individuality is reformed in the poet's process of writing and re-visioning while simultaneously being dispersed once again between words, sentences, and pages.