• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.5
• /
• pp.469-475
• /
• 2010

This paper presents a method of classifying discolored defects of metal pads using geometric texture for AFVI (Automated Final Vision Inspection) systems. In PCB manufacturing process, the metal pads on PCB can be oxidized and discolored partly due to various environmental factors. Nowadays the discolored defects are manually detected and rejected from the process. This paper proposes an efficient geometric texture feature, SUTF (Symmetry and Uniformity Texture Feature) based on the symmetric and uniform textural characteristics of the surface of circular metal pads for automating AFVI systems. In practical experiments with real samples acquired from a production line, 30 discolored images and 1232 roughness images are tested. The experimental results demonstrate that the proposed method using SUTFs provides better performance compared to Gabor feature with 0% FNR (False Negative Rate) and 1.46% FPR (False Positive Rate). The performance of the proposed method shows its applicability in the real manufacturing systems.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.4
• /
• pp.59-65
• /
• 2012

Hot pepper can be easily faded or discolored in drying process, so we need to use the sorting technique to improve the quality for dried hot pepper. Independent Component Analysis (ICA) is one of the most widely used methods for blind source separation. In this paper we use this technique to get a concentration image of the most important component which plays a role in the dried pepper. This concentration image is different from the binary image and it reflects the characteristics of major components, so that we know the distribution and quality of the component and how to sort the dried pepper. Also, the size of the concentration image can tell the relation with capsaicinoids which make hot taste. We propose a sorting method of the dried hot pepper that is faded or discolored and lacked a major component likes capsaicin in drying process using ICA concentration image.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.778-785
• /
• 2009

This paper presents a Gabor texture feature extraction method for classification of discolored Metal pad images using GPU(Graphics Processing Unit). The proposed algorithm extracts the texture information using Gabor filters and constructs a pattern map using the extracted information. Finally, the golden pad images are classified by utilizing the feature vectors which are extracted from the constructed pattern map. In order to evaluate the performance of the Gabor texture feature extraction algorithm based on GPU, a sequential processing and parallel processing using OpenMP in CPU of this algorithm were adopted. Also, the proposed algorithm was implemented by using Global memory and Shared memory in GPU. The experimental results were demonstrated that the method using Shared memory in GPU provides the best performance. For evaluating the effectiveness of extracted Gabor texture features, an experimental validation has been conducted on a database of 20 Metal pad images and the experiment has shown no mis-classification.

• The Journal of the Acoustical Society of Korea
• /
• v.39 no.6
• /
• pp.576-584
• /
• 2020

In order to obtain basic information for using polyvinyl alcohol (PVA) gel as a tissue mimicking phantom for temperature visualization, the temperature change characteristics due to the focused ultrasound were examined for different concentration of PVA. To obtain the basic acoustic characteristics, the speed of sound, the attenuation coefficient, and the density depending on the PVA concentration were measured, and the thermodynamic characteristics, such as thermal conductivity and heat capacity, were measured. The range of temperature rising in the vicinity of the focal point due to the focused ultrasound was observed using a thermochromic film that changes color at 30 degree or more, and the discolored area was obtained by image processing of the recorded image. As the concentration of PVA increases in the given range of 2 wt% ~ 16 wt%, the area that rises above 30 degree inside the gel increases linearly. It is confirmed that the discolored area increases as the power applied to the focused ultrasonic transducer increases. These results showed good agreement with the simulation results using the finite element method.

• Journal of the Korean Society of Safety
• /
• v.26 no.2
• /
• pp.26-31
• /
• 2011

In this paper, the safety diagnosis using thermal image analysis is described for power equipments. The conventional three-phase comparison method has only provided the results of thermal comparison for the equipments. The proposed method defines the conditions of poor connection by visual checks, and supports the criteria with each thermal rise step. As a result, the thermal difference from $5^{\circ}C$ to $10^{\circ}C$ meant the warning state. In addition, the thermal difference more than $10^{\circ}C$ meant that the connection status was unbalanced. In this case, the countermeasure might be the internal load distribution. If the thermal difference more than $20^{\circ}C$ is observed, it means a hot spot at the poor connection. If the hot spot is observed all over the surface, its cause was the unbalanced load, which made the conductive parts discolored and raised the possibility of oxidization or $Cu_2O$ generation. This diagnostic technology employing thermal image analysis method can be directly applied in the field and ensures the safety of equipments.

• Korean Chemical Engineering Research
• /
• v.58 no.2
• /
• pp.286-292
• /
• 2020

This study presents an angular-based measurement on three-dimensional paper-based analytical devices (3D-PADs) for quantitative detection of albumin without using an image analyzer. We demonstrate a simple quantitative and straightforward approach based on the angle of the discolored area as detection criteria. 3D-PADs are rapidly fabricated by the wax-printing and laminating process. The 3D-PADs are treated with citrate buffer and tetrabromophenol blue to react with albumin in a sample solution. Dropping sample solution into sample pad in the 3D-PAD, fluid flows toward the assay zone laterally and vertically by capillary action. We find that the change of angle of the discolored area correctly reflects the concentration of albumin and is reliable determinant for the measurement of the albumin concentration. It is the first demonstration of angular-based detection as a simple, inexpensive, and equipment-free approach for point-of-care diagnosis.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1319-1324
• /
• 2012

Tomatoes were harvested at different ripening stages. To determine the ripening stages, We analyzed the relation between the compound concentrations of tomato measured with HPLC and the tomato RGB images. Among the compound concentrations, tomato quality is mostly affected by the Lycopene. The $Q^2$ error of the predicted Lycopene concentration and the corresponding independent component of tomato RGB image, determined from the PLS procedure, was 0.92. and we show the effectiveness of the independent component by comparing the error between the pixel area of RGB image applied by independent component and the simple black white tomato image. This regression made it possible to construct concentration images of the tomatoes, which showed non-uniform ripening. The method can be applied in an unsupervised real time sorting machine of unripe and discolored tomato using the compound concentrations.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.24 no.1
• /
• pp.19-26
• /
• 1997

Odontodysplasia is a rare developmental anomaly of tooth formation in which hard tissue are affected. Odontodyplasia affects the primary and permanent dentitions in the maxilla, mandible, or both jaws. The maxilla is involved twice as often as the mandible. The condition is more common in female than in male patients and in the anterior than in the posterior regions. The clinical manifestation of odontodysplasia are hypoplasia and hypocalcification of the enamel and dentin of affected teeth. Teeth tend to be small and discolored, with short roots and widely open pulp canal. Delayed eruption of affected teeth with abscess formation is common. Radiographically teeth assume a faint radiolucent image ("ghost teeth"). enamel and dentin appear thin and are similar in radiodensity. The pulp chambers are often larger than normal, calcifications(pulp stone and denticle) are found within them. The etiology of regional odontodysplasia is unknown. However, several causes have been discussed, including somatic mutation, local circulatory disorders, local trauma, failure of migration and differentiation of neural crest cells, local infection.

• Journal of Fashion Business
• /
• v.12 no.5
• /
• pp.77-93
• /
• 2008

The purpose of the study was to examine make-up expression elements of horror characters as an evil spirit, a vampire, a zombie, a monster and a psycho murderer through make-up, focused on horror movies of the United States after1960s. First, an evil spirit was expressed that the pupil grew dim without a focus and the skin was torn by going bad and rot completely. Also, it was expressed that its teeth was changed to pointed canine teeth as a wild beast and its pale and bloodless face showed blood vessels clearly. To express its bloodless and pale skin, air brush was swept into the skin over several times. Its canine tooth was made acryl powder into its shape and was harden to make its shape smooth. Also, it was colored to show people like the real thing. Second, a vampire was expressed by make-up elements as long nails, a sharp canine tooth, a pale skin with a blood vessel and dead eyes. Its rough skin and long nails were manufactured with latex foam, which was colored like the skin. Third, a monster image as a werewolf was expressed by make-up elements as fur, sharp teeth, changed nails and toenails, a rough skin and a face changed to a wolf. Rubber mask and rubber body suit were manufactured as a make-up of special character and so all its body was changed. Fourth, a psycho murderer and body-deformed man were expressed by make-up elements as a distorted mask, swelled-up and deformed skull and face form, terribly deformed body, discolored and hang down skin and teeth with an indeterminate form. Its body and face were manufactured by the foam latex technology according to make-up design as a make-up of special character.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.20
• /
• pp.8607-8612
• /
• 2014

Background: Breast cancer patients experience a variety of altered appearance - such as loss or disfigurement of breasts, discolored skin, and hair loss - which result in psychological distress that affect their quality of life. This study aims to evaluate the impact of socioeconomic status on the altered appearance distress, body image, and quality of life among Korean breast cancer patients. Materials and Methods: A cross-sectional survey was conducted at advocacy events held at 16 different hospitals in Korea. Subjects were eligible to participate if they were 18 years of age or older, had a histologically confirmed diagnosis of breast cancer, had no evidence of recurrence or metastasis, and had no psychological problems at the time of the survey. Employment status, marital status, education, and income were assessed for patient socioeconomic status. Altered appearance distress was measured using the NCI's cancer treatment side effects scale; body image and quality of life were measured by the EORTC QLC-C30 and BR23. Means and standard deviations of each outcome were compared by socioeconomic status and multivariate linear regression models for evaluating the association between socioeconomic status and altered appearance distress, body image, and quality of life. Results: A total of 126 breast cancer patients participated in the study; the mean age of participants was 47.7 (SD=8.4). Of the total, 83.2% were married, 85.6% received more than high school education, 35.2% were employed, and 41% had more than $3000 in monthly household income. About 46% had mastectomy, and over 30% were receiving either chemotherapy or radiation therapy at the time of the survey. With fully adjusted models, the employed patients had significantly higher altered appearance distress (1.80 vs 1.48; p<0.05) and poorer body image (36.63 vs 51.69; p<0.05) compared to the patients who were unemployed. Higher education (10.58, standard error (SE)=7.63) and family income (12.88, SE=5.08) was positively associated with better body image after adjusting for age, disease stage at diagnosis, current treatment status, and breast surgery type. Similarly, patients who were married and who had higher education had better quality of life were statistically significant in the multivariate models. Conclusions: Socioeconomic status is significantly associated with altered appearance distress, body image, and quality of life in Korean women with breast cancer. Patients who suffer from altered appearance distress or lower body image are much more likely to experience psychosocial, physical, and functional problems than women who do not, therefore health care providers should be aware of the changes and distresses that these breast cancer patients go through and provide specific information and psychosocial support to socioeconomically more vulnerable patients.