• 전기학회논문지P
• /
• 제55권1호
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• 전기화학회지
• /
• 제1권1호
• /
• pp.8-13
• /
• 1998

This work presents the way how to evaluate the degree of reversibility of the discharging process undergone by the nickel hydroxide film cathodically deposited on pure nickel as a positive electrode for electrochemical capacitor using the combined cyclic voltammetry and potential drop method, supplemented by galvanostatic discharge and open-circuit potential transient methods. The time interval necessary just to establish the current reversal of anodic to cathodic direction from the moment just after applying the potential inversion of anodic to cathodic direction, was obtained on cyclic voltammogram. The cathodic charge density passed upon dropping the applied potential, was calculated on potentiostatic current density-time curve. Both the time interval and the cathodic charge density in magnitude can be regarded as being measures of the degree of reversibility of the discharging process undergone by the positive active material for supercapacitor, i.e. , the longer the time interval is, the lower is the degree of reversibility and the greater the cathodic charge density is, the higher is the degree of reversibility. From the applied potential dependences of the time interval and cathodic charge density, discharge at $0.42 V_{SCE}$ was determined to be the most reversible.

• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.137-146
• /
• 2002

In order to investigate the effect of irradiation by $^{60}Co-\gamma$rays as well as the e thermal treatment on the dielectric deterioration in ethylene propylene rubber, insulating material for electric cables used in atomic power plants, charging discharging current, residual built- up voltage and dielectric properties are measu discussed in this study. Variance in the characteristic of relative dielectric constant as a function of tem was observed in relatively high dose of irradiation. Since glass transition tem appeared at tens of degree Celsius below zero, the characteristic is attributed orientation polarization. Dielectric loss is generally increased, with increasing d irradiation in the characteristic of dielectric loss as a function of temperature, No d loss by thermal treatment was observed. Dielectric resistance decreases with increa of irradiation in the characteristic of charging current as a function of temperature be considered that dielectric resistance seems to be recovered by thermal treatm characteristic of discharging current as a function of time in the specimen less ir become similar to that of the unirradiated, when thermal treated. A peak is shown residual built- up voltage as a function of time, and the corresponding time of the shorten as increasing dose of irradiation. It is also observed that the corresponding the peak is lengthened by thermal treatment.

• 대한전자공학회논문지TE
• /
• 제39권4호
• /
• pp.335-340
• /
• 2002

본 논문에서 얇은 실리콘 산화막의 스트레스 유기 누설전류는 나노 구조를 갖는 트랜지스터의 ULSI 실현을 위하여 조사하였다. 인가전압의 온 오프 시간에 따른 스트레스전류와 전이전류는 실리콘 산화막에 고전압 스트레스 유기 트랩분포를 측정하기 위하여 사용하였다. 스트레스전류와 전이전류는 고스트레스 전압에 의해 발생된 트랩의 충방전과 양계면 가까이에 발생된 트랩의 터널링에 기인한다. 스트레스 유기 누설전류는 전기적으로 기록 및 소거를 실행하는 메모리 소자에서 데이터 유지 능력에 영향이 있음을 알았다. 스트레스전류, 전이전류 그리고 스트레스 유기 누설전류의 두께 의존성에 따른 산화막 전류는 게이트 면적이 10/sup －3/㎠인 113.4Å에서 814Å까지의 산화막 두께를 갖는 소자에서 측정하였다. 스트레스 유기 누설전류, 스트레스전류, 그리고 전이전류는 데이터 유지를 위한 산화막 두께의 한계에 대해 연구 조사하였다.

• 대한전자공학회논문지SD
• /
• 제37권11호
• /
• pp.25-35
• /
• 2000

금속-산화막-반도체 소자의 산화막에 존재하는 느린 준위에 의한 전류반응 특성을 양방향 전류-전압 측정기술을 적용하여 분석하였다. 게이트 바이어스에 따라 나타나는 충전 및 방전시의 순간전류를 유지시간, 지연시간, 전자주입 방향 및 전자주입량, 그리고 전자 주입후 상온 방치시간의 함수로서 조사하였다. 느린 준위의 전하교환에 따른 전류 성분을 게이트 전압에 따라 실리콘 내 캐리어의 이동에 의해 나타나는 변위전류와 분리하여 해석하였다. 충전 및 방전시 나타나는 전하교환 전류는 산화막내 정전하 밀도뿐만 아니라 계면준위 밀도에도 크게 의존이 되며, 본 연구에서는 느린 준위의 전하교환 메카니즘을 제시하였다.

• Journal of Electrical Engineering and Technology
• /
• 제13권6호
• /
• pp.2227-2235
• /
• 2018

Under the current policies and compensation rules in South Korea, Photovoltaic (PV) generation supplier can maximize the profit by combining PV generation with Energy Storage System (ESS). However, the existing operational strategy of ESS is not able to maximize the profit due to the limitation of ESS capacity. In this paper, new ESS scheduling algorithm is introduced by utilizing the System Marginal Price (SMP) and PV generation forecasting to maximize the profits of PV generation supplier. The proposed algorithm determines the charging time of ESS by ranking the charging schedule from low to high SMP when PV generation is more than enough to charge ESS. The discharging time of ESS is determined by ranking the discharging schedule from high to low SMP when ESS energy is not enough to maintain the discharging. To compensate forecasting error, the algorithm is updated every hour to apply the up-to-date information. The simulation is performed to verify the effectiveness of the proposed algorithm by using actual PV generation and ESS information.

• 한국진공학회지
• /
• 제16권3호
• /
• pp.181-186
• /
• 2007

본 연구에서는 플라즈마 디스플레이 패널의 방전 특성과 MgO 보호막 물성에 영향을 미치는 MgO 증착률에 대해 분석을 하였다. 물성 특성으로 결정 방향과 표면 거칠기 결정 구조 및 음극선 발광을 XRD (X-ray Diffraction), AFM (Atomic Force Microscopy), Mono-CL (Mono Cathode Luminescence analysis)등을 이용하여 측정하였고, 방전 특성으로는 방전개시전압과 방전 전류, 휘도를 진공 챔버와 오실로스코프 (TDS 540C), 전류 프로브 (TCP 312A), 휘도 색차계 (CS-100A)를 이용하여 측정하였다. 실험 결과 $5{\AA}/sec$의 증착률이 최적의 증착률임을 확인하였고, 또한 MgO의 증착률에 따라서 MgO 보호막의 물성특성이 변화하고 이에 의해서 전기적 광학적 특징이 영향을 받는 것을 확인하였다. 즉, 증착률 $5{\AA}/sec$을 기준으로 증착률이 증가할수록 (200) 결정 방향 및 음극선 발광의 밀도가 감소되고, 동작 전압은 증가하며 점차 효율이 나빠지는 경향을 보인다.

• 전기화학회지
• /
• 제19권3호
• /
• pp.57-62
• /
• 2016

The over-discharging phenomena in sodium-nickel chloride batteries were investigated in relation to decomposition of molten salt electrolyte and consequent metal co-deposition. From XRD analysis, the material deposited on graphite cathode current collector was revealed to be by-product of molten salt electrolyte decomposition. In particular, the result showed that the Ni-Al alloys ($Al_3Ni_2$, $Ni_3Al$ and $Al_3Ni$) were electrochemically deposited on graphite current collectors in line with over-discharging behaviors. It is assumed that the $NiCl_2$ solubility in molten salt electrolytes leads to the co-deposition of Ni-Al alloys by increasing metal deposition potential above 1.6 V (vs. $Na/Na^+$). The cell tests have revealed that the composition of molten salt electrolytes modified by various additives makes a decisive influence on the over-discharging behaviors of the cells. It was revealed that NaOCN addition to molten salt electrolytes was advantageous to suppress over-discharge reactions by modifying the characteristics of molten salt electrolytes. NaOCN addition into molten salt electrolytes seems to suppress Ni solubility by maintaining basic melts. The cell using modified molten salt electrolyte with NaOCN (Cell D) showed relatively less cell degradation compared with other cells for long cycles.

• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.411-418
• /
• 1998

LPCVD 방법으로 실리콘 산화막 두께 10nm에서 80nm인 MOS를 제작하였다. 그리고 스트레스 전계 산화막 전류의 두께 의존성을 조사하였다. 산화막 전류는 스트레스 전류와 전이전류로 구성되어 있음을 보여 주었다. 스트레스 전류는 스트레스 유기 누설전류와 직류전류로 이루어졌으며 산화막을 통하는 트립 어시스트 터널링으로 행해진다. 전이전류는 계면에서 트랩의 터널링 충전과 방전에 의해 이루어진다. 스트레스 전류는 산화막 전류의 두계 한계를 평가하는데 이용되고 전이전류는 기억소자에서 데이터 유지에 사용된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.307-308
• /
• 1987

A low-Pressure gap decoupling crow-bar switch was designed and operated to obtain prolonged current pulses by discharging 50kJ condeser banks. And air core Rogowski coil was used for measuring high current.