• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.115-119
• /
• 2002

In this paper we present a generalized directional morphological filtering algorithm for the removal of impulse noise, which is based on a combination of impulse noise detection and a weighted rank-order morphological filtering technique. For salt (or pepper) noise suppression, the generalized directional opening (or closing) filtering of the input signal is selectively used. The detection of impulse noise can be done by the geometrical difference of opening and closing filtering. Simulations show that this new filter has better detail feature preservation with effective noise reduction compared to other nonlinear filtering techniques.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.2
• /
• pp.123-129
• /
• 2017

In this paper, the realization of a directional digital hearing aid was considered. Conventional time domain time delay method was replaced with digital filters in order to make any general-purposed DSP (Digital Signal Processing) chip to produce the similar directivity pattern. Both the time delay algorithm and the digital filter algorithm were initially evaluated by Matlab (Matrix laboratory) for comparison, and it was confirmed by CSR 8675 Bluetooth DSP IC (Digital Signal Processing Integrated Circuit) chip firmware realization. Some remote control features by a smart phone was added to the smart hearing aid for user interface easiness.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.4
• /
• pp.216-224
• /
• 2002

This paper describes a performance of a satellite tracking antenna control system for mobile DBS reception. In order to improve the tracking speed and the stability of this system, a directional sensor function is added to a conventional left-right tracking algorithm. The satellite tracking experiments of the fabricated antenna system for the DBS reception were performed at a highway and an urban area. The measured AGC signal level on the highway was observed above the level to watch television. Therefore, an excellent performance of the hardware system with the tracking algorithm compensated for the directional sensor was confirmed.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.4
• /
• pp.119-131
• /
• 2011

In this paper, we explore the application of 2-D dual-tree discrete wavelet transform (DDWT), which is a directional and redundant transform, for image coding. DDWT main property is a more computationally efficient approach to shift invariance. Also, the DDWT gives much better directional selectivity when filtering multidimensional signals. The dual-tree DWT of a signal is implemented using two critically-sampled DWTs in parallel on the same data. The transform is 2-times expansive because for an N-point signal it gives 2N DWT coefficients. If the filters are designed is a specific way, then the sub-band signals of the upper DWT can be interpreted as the real part of a complex wavelet transform, and sub-band signals of the lower DWT can be interpreted as the imaginary part. The quincunx lattice is a sampling method in image processing. It treats the different directions more homogeneously than the separable two dimensional schemes. Quincunx lattice yields a non separable 2D-wavelet transform, which is also symmetric in both horizontal and vertical direction. And non-separable wavelet transformation can generate sub-images of multiple degrees rotated versions. Therefore, non-separable image processing using DDWT services good performance.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.146-149
• /
• 2008

Simulation and signal conditioning on the time domain surface elevation records are conducted to verify the proposed Welch's method in non-directional ocean wave spectrum analysis. These spectrum data are further conditioned to provide wave characteristic that better describe the sea states. Comparison of significant wave height and zero crossing period between the proposed method and a reference toolkit are presented.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.733-736
• /
• 1999

In this Paper, Bit selectable and Bi-directional Interface Port is described, which can communicate data with the peripheral devices. Specially A description of the asynchronous design method is given to remove the clock skew phenomenon and the output asynchronous control method which finds the optimal clock and controls all the enable signal of the output pins at the same time is presented. Using this technique interface ports have delay time of less-than 0.5㎱.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1E
• /
• pp.8-13
• /
• 2006

In this paper, an Optimized Ambisonic Panning Algorithm (OAPA) which reduces sound localization error, is proposed. In the conventional Ambisonic Panning Algorithm (APA), sound localization is usually different from the panning angle, especially when listeners are not in an ideal listening position, because of low signal separation among other channels. To overcome this problem, an OAPA using window functions is proposed. A proper window function can be verified, comprising of higher harmonic components than 2M+1 and improved DPC and channel separation. Analysis results demonstrate that the proposed method results in higher signal separation among other channels and lower sound localization errors than the conventional APA.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.58-61
• /
• 2003

In this study, a planar respiratory motion is modeled by a 2-D linear expanding-shrinking movement. According to the introduced model, respiratory motion imposes phase error, non-uniform sampling and amplitude modulation distortions on the acquired MRI data. When the motion parameters are known or can be estimated, a construction algorithm based on superposition method was used to remove the MRI artifact. For the purpose of estimating unknown motion parameters, we used the spectrum shift method to find the respiratory fluctuation function, the x directional expansion coefficient and its center, and we also used the minimum energy method to find the y directional expansion coefficient and its center. Finally the effectiveness of this presented method is shown by computer simulations.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.67-68
• /
• 2006

This study suggests a precision flow control system that enables fluid injection of a few grams at a time in a few ms time duration. The fluid injection system suggested here consists of a high pressure fluid pump, a 3 way 3 position directional control valve, an injector and an orifice. The orifice is located between the directional control valve and the injector. By supplying current signal to the directional control valve, the prescribed small amount of fluid can be supplied to a plant through the injector. The control robustness of the suggested system against the disturbances like the pressure change in a plant and the viscosity variation of the injected fluid is secured easily by using an orifice with very small inside diameter and setting the supply pressure with comparatively high value. The control performances of the suggested system are verified by numerical simulations and experiments. The outcomes of this research could be applied to the common rail injection control of lubrication oil for large size marine diesel engines, and other industrial plants.

• Journal of Drive and Control
• /
• v.15 no.1
• /
• pp.1-9
• /
• 2018

The spool displacement of directional control valve can be considered as the standard signal to measure the bandwidth frequency of a directional control valve. When the spool displacement is not available, the metering-orifice system is implemented in this research as an alternative way of measuring the 90 degrees phase bandwidth frequency of the hydraulic directional control valve. The inertia effect on the transmission line oil induces the phase lead of the valve load pressure when compared with the phase of spool displacement. The capacitance effect of the oil induces the phase lag of the valve load pressure. The phase of the load pressure can be adjusted to be the same as that of the spool displacement by controlling the opening area of the metering orifice. A series of experiments were conducted to verify the effectiveness of the metering orifice. The 90 degrees phase bandwidth frequency measured from the valve load pressure was significantly deviated in some cases from the frequency of the spool displacement. The metering orifice was hard to be applied to measure the -90 degrees phase bandwidth frequency of the high precision.