• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.598-600
• /
• 2003

Ad­hoc 무선 망에서 directional antenna의 사용은 interference를 감소시키고 spatial reuse의 증가, 그리고 네트워크 전체의 capacity 증가 등의 장점을 제공한다. 하지만 기존의 IEEE 802.11 MAC protocol은 omnidirectional antenna를 고려하여 디자인되었기 때문에 기존의 MAC protocol이 directional antennas에 사용될 경우 directional antennas의 장점을 효율적으로 제공하지 못한다. Directional antenna는 이러한 장점을 가지는 반면에 RTS/CTS를 방향성 있는 전송을 하기 때문에 hidden terminal과 이웃 노드의 위치를 파악하는데 있어서 많은 문제를 가지고 있다. 이 논문에서 우리가 제안하는 MAC protocol은 directional antennas 특성상의 문제점을 해결하여 directional antennas의 장점을 최대한 이용한다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.742-745
• /
• 2009

This paper proposes a wireless LAN antenna system that tracks an object automatically by using image-based tracking. The proposed system consists of a camera and a pan-tilt unit in addition to a directional wireless LAN antenna. The camera and the directional antenna are set in same direction and they are set on the pan-tilt unit. A target object which has a wireless LAN receiver is tracked by using images captured by the camera. And the directional antenna faces in same direction as the camera by the pan-tilt unit. Therefore, the directional antenna keeps pointing the receiver, and a transmitting efficiency is improved. A result of a fundamental experiment shows that a receiver attached to a flying airship was tracked by a prototype of the proposed antenna system. The airship flied about, and the proposed antenna system was set on a roof of a building. The experimental result indicates an effectiveness of the proposed system compared to the conventional directional LAN antenna.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.11
• /
• pp.1074-1077
• /
• 2013

This paper analyzes the benefit of using directional antennas against eavesdropping attack in millimeter wave (mmWave)-based networks. All devices are equipped with a directional antenna or an omni-directional antenna in a single-hop communications. The probability of a device being detected by an eavesdropper is analyzed based on the exposure region of a device. The relative detection rate is introduced to represent the benefit of using directional antenna. Numerical results show that there exists an optimal number of devices that maximizes the detection probability and it varies according to the parameters such as antenna beamwidth. It shows that the use of directional antenna enables to protect the devices from the detection by an eavesdropper for almost the whole situation in mmWave band communication.

• Journal of KIISE:Information Networking
• /
• v.37 no.4
• /
• pp.294-300
• /
• 2010

In this paper, We analysis of effective coverage extension for Tri-sector cellular systems using Multi-hop Relay based on IEEE802.16j system. In the proposed international standard of IEEE 802.16j MMR (Mobile Multi-hop Relay) use of the omni-directional antenna, 3-sector and 6-sector antenna is considered to Base Station and Relay Station. Omni-directional antenna service can offer as all directions but a throughput decreases due to the signal interference of near Relay Stations. In the directional antenna, cause of an interference with the base station which it arranges an antenna so that a beam can have the direct and does with neighbor Base Station and Relay Station can be reduced interference, therefore the effective throughput is higher than the omni-directional antenna system. But, In case of Base Station and Relay Station use the directional antenna, the efficiency which the directional antenna has the Co-channel interference due to in the different cell by the channel reuse is decreased. In this study, we propose the structure of arranging the Base Station and Relay Station having the directional antenna in the NBTC, WBTC antenna in a multi-tier. It compared and analyzed with the mode that the multi-hop Relay Station has the omni-directional antenna, Relay Station are used the NBTC antenna and the WBTC antenna system also, We analyze a relation between the performance degradation and the cell coverage extension which it follows because the number of hop in the multi-hop Relay Station.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.206-209
• /
• 2016

This letter proposes a reconfigurable directional coupler that uses a variable impedance mismatch reflector to achieve high isolation characteristics in the antenna front end. The reconfigurable coupler consists of a directional coupler and a single-pole four-throw (SP4T) switch with different load impedances as a variable load mismatch reflector. Selection of the load impedance by the reflector allows cancellation of the reflected signal due to antenna load mismatch and the leakage from the input to isolation port of the directional coupler, resulting in high isolation characteristics. The performance of the proposed architecture in separating the received (Rx) signal from the transmitted (Tx) signal in the antenna front end was verified by implementing and testing the reconfigurable coupler at 917 MHz for UHF radio-frequency identification (RFID) applications. The proposed reconfigurable directional coupler showed an improvement in the isolation characteristics of more than 20 dB at the operation frequency band.

• International Journal of Contents
• /
• v.10 no.2
• /
• pp.9-17
• /
• 2014

Since vehicles' trajectories are so complex and dense traffic changes in nature frequently, the VANET (Vehicles Ad-hoc Network), using Omni-directional Antenna, has many channel collisions (or overlapping) on Data Link phrases (MAC layers). It is not easy to keep a good seamless communication status for VANET because of its unpredictable network environment. Among VANET research, Directional Antenna have been proposed as one of the most common systematical solutions to reduce (or to mitigate) this miss-communication problems by narrowing communicational ranges and making use of its customized error-detection process. However, even though Directional Antennas help VANET keep good seamless communication, many VANET researchers have reported that Directional VANET still has miss-communicational problems - this has lead to problems like 'Directional Hidden Terminal Problem', 'Deafness', 'Un-accuracy Lobe Scopes' and 'High Deployment Cost' being reported in various papers. To establish well-organized design assessments for a good Directional VANET MAC protocol to overcome these problems, we rearranged and grouped current Directional VANET' qualitative criteria from several current survey papers using these categories- 'Directional Discovery', 'Directional Forwarding' and 'Directional Handover'. In addition, based on the results of the following analysis, we show the essential design concerns that need to be looked at in order to develop a well-designed Directional-VANET MAC protocol.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.11a
• /
• pp.101-104
• /
• 1996

A new detecting system for moving objects of coastal region has been designed by directional antenna and driving circuits. The designed system has been investigated by CAD for linear and planar antenna arrays of various radiating elements for antenna simulations and by P-spice of device simulations. For detecting the displacement of moving objects, we constructed four wideband dipole antenna, diode switching circuit, mixer, filter and amplifier. The results of antenna receiver were shown a possibility of distance measuring system through phase difference of radiation patterns in antenna simulation

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.627-633
• /
• 2008

In the case of traffic accidents, the broadcasting methods used in the mobile ad hoc network (MANET) cannot applied to transmit reliable message since moving high-speed in vehicular ad hoc networks (VANET) environments. In this paper, in order to guarantee transmitting reliable messages, we propose a collision avoidance method based-on directional antenna in VANET. In order to reduce interference from omni-broadcasting and to avoid hidden node problem from moving high-speed, we employed a forward-handed and backward directional antenna. The authors simulated the proposed method based on directional antenna and showed that the proposed method has been improved in respect to network utilization compared to existing VANET protocols.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.627-635
• /
• 2008

Using directional antenna in wireless network can offer many advantages including significant decrease of interference, increase of spatial reuse and possibility of improving network capacity. However, existing 802.11 MAC is designed for use of omni-directional antenna then those advantages can not be shown in that MAC protocol when it uses directional antenna. In this paper, we present a MAC protocol specifically designed for directional antenna to achieve spatial reuse and improve capacity of MAC protocol. Simulation result shows the advantages of our proposal in comparison with existing MAC in terms of end-to-end delay and network throughput.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.13-17
• /
• 2010

In this paper, we have described a simple CPW-fed UWB antenna for wireless UWB communication. The proposed antenna consists of two symmetrical strips having two steps and CPW feeding. Two techniques(symmetrical structure, two steps) are used to produce good low-dispersion and impedance matching. The proposed UWB antenna has an omni directional radiation pattern, compact size, low dispersion, and low cost.