• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.1
• /
• pp.17-24
• /
• 2020

The purpose of this study was to evaluate the accuracy and precision of the three-dimensional (3D) imaging system of children's facial soft tissue by comparing linear measurements. The subjects of the study were 15 children between the ages of 7 and 12. Twenty-three landmarks were pointed on the face of each subject and 16 linear measurements were directly obtained 2 times using an electronic caliper. Two sets of 3D facial images were made by the 3D scanner. The same 16 measurements were obtained on each 3D image. In the accuracy test, the total average difference was 0.9 mm. The precision of 3D photogrammetry was almost equivalent to that of direct measurement. Thus, 3D photogrammetry by the 3D scanner in children had sufficient accuracy and precision to be used in clinical setting. However, the 3D imaging system requires the subject's compliance for exact images. If the clinicians provide specific instructions to children while obtaining 3D images, the 3D device is useful for investigating children's facial growth and development. Also the device can be a valuable tool for evaluating the results of orthodontic and orthopedic treatments.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• Journal of muscle and joint health
• /
• v.6 no.2
• /
• pp.253-277
• /
• 1999

Patients with chronic disease have various treatment patterns because it shows a progressive degenerative feature. Especially various physical and emotional problems of the rheumatoid arthritis patients leave them shopping around various types of treatment. According to previous studies, over 70% of patients with arthritis experienced the traditional oriental medicine or folk remedies simultaneously with medical treatment within one year after the onset of disease. The purposes of this study are 1) to compare the patterns of treatment-seeking behaviors between Korean arthritis patients and Americans ; and 2) test two models of treatment-seeking behaviors by path analysis, one for early treatment-seeking behavior model(ETBM) and the other is chronic treatment-seeking behavior model (CTBM) in Korean sample. The interview survey was performed to 133 RA patients with structured questionnaire at out-patient clinic or public health center. Patients characteristics such as age, duration of disease were similar in two countries except higher educational background in Americans. There were no patients using only alternative therapies or no medical treatment in the US. Most of the American patients have chosen both medical treatment and alternative therapy, while the Koreans less than American. In Korea, combined treatment group usually consists of the people who are younger, more educated and higher economic status than the characters of other groups in early or chronic stages. In early stage, they tend to have strong belief of curing from the disease, satisfy the relationship with their physicians and comply with direction of the medical professional. The paths of two models were explained by 70% in ETBM and 33% in CTBM. When the models were modified, almost all paths of the CTBM were the same as the previous one, but direct determinant factor was changed from the relationship with physicians to the lay referral system in chronic model. These two models' explanation powers became 94% and 88%, respectively. The attitude or perception of disease, lay referral system and the relationship with medical personnel are the main determinants of treatment-seeking behaviors.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1045-1050
• /
• 2014

$N_2O$(Nitrous Oxide) is known as the third major GHG(Green House Gas) following $CO_2$(Carbon Oxide) and $CH_4$(Methane). The GWP(Global Warming Potential) factor of $N_2O$ is 310 times as large as that of $CO_2$ because $N_2O$ in the atmosphere is very stable, and it becomes a source of secondary contamination after photo-degradation in the stratosphere. Investigation on the cause of the $N_2O$ formation have been continuously reported by several researchers on power sources with continuous combustion form, such as a boiler. However, in the diesel engine, research on $N_2O$ generation which has effected from fuel components has not been conducted. Therefore, in this research, author has investigated about $N_2O$ emission rates which was changed by nitrogen and sulfur concentration in fuel on the diesel engine. The test engine was a 4-stroke direct injection diesel engine with maximum output of 12 kW at 2600rpm, and operating condition of that was set up at a 75% load. Nitrogen and sulfur concentrations in fuel were raised by using six additives : nitrogen additives were Pyridine, Indole, Quinoline, Pyrrol and Propionitrile and sulfur additive was Di-tert-butyl-disulfide. In conclusion, diesel fuels containing nitrogen elements less than 0.5% did not affect $N_2O$ emissions in the all concentrations and kinds of the additive agent in the fuel. However, increasing of the sulfur additive in fuel increased $N_2O$ emission in exhaust gas.

• Progress in Medical Physics
• /
• v.20 no.3
• /
• pp.174-179
• /
• 2009

To track moving tumor in real time, CyberKnife system imports a technique of the synchrony respiratory tracking system. The fiducial marker which are detectable in X-ray images were demand in CyberKnife Robotic radiosurgery system. It issued as reference markers to locate and track tumor location during patient alignment and treatment delivery. Fiducial marker implantation is an invasive surgical operation that carries a relatively high risk of pneumothorax. Most recently, it was developed a direct lung tumor registration method that does not require the use of fiducials. The purpose of this study is to measure the accuracy of target applying X-sight lung tracking using the Gafchromic film in dynamic moving thorax phantom. The X-sight Lung Tracking quality assurance motion phantom simulates simple respiratory motion of a lung tumor and provides Gafchromic dosimetry film-based test capability at locations inside the phantom corresponding to a typical lung tumor. The total average error for the X-sight Lung Tracking System with a moving target was $0.85{\pm}0.22$ mm. The results were considered reliable and applicable for lung tumor treatment in CyberKnife radiosurgery system. Clinically, breathing patterns of patients may vary during radiation therapy. Therefore, additional studies with a set real patient data are necessary to evaluate the target accuracy for the X-sight Lung Tracking system.

• Journal of muscle and joint health
• /
• v.8 no.1
• /
• pp.27-50
• /
• 2001

Rheumatoid arthritis is a chronic systemic autoimmune disease. Although the joints are the major loci of the disease activity, fatigue is a common extraarticular symptom that exists in all gradations of rheumatoid arthritis. Fatigue is defined as a subjective sense of generalized tiredness or exhaustion and has multiple dimensions. Therefore fatigue is a common and frequent problem for those with rheumatoid arthritis. In fact, 88-100% of individuals with rheumatoid arthritis experience fatigue. Especially the degree of fatigue is higher in women than men with rheumatoid arthritis. Despite the importance of fatigue among the patients with rheumatoid arthritis, the mechanism that leads to fatigue in rheumatoid arthritis is not completely understood. This study was intended to test and validate a model to predict fatigue in women with rheumatoid arthritis. Especially it was intended to identify the direct and indirect effects of the variables of pain, disability, depression, sleep disturbance, morning stiffness, and symptom duration to fatigue. Data were collected by questionnaires including Multidimensional Assesment of Fatigue(Tack, 1991), numeric scale of pain, graphic scale of joints, Ritchie Articular Index, Korean Health Assessment Questionnaire(Bae, et al., 1998), Inventory of Function Status(Tulman, et al., 1991), Center for Epidemiologic Studies-Depression, and Korean Sleep Scale(Oh, et al 1998). The sample consisted of 345 women with a mean duration of rheumatoid arthritis for 10.06 years and a mean age of 49.64 years. SPSS win and Win LISREL were used for the data analysis. Structural equation modeling revealed the overall fit of the model. Pain predicted fatigue directly and indirectly through disability, depression, and sleep disturbance. Disability, sleep disturbance predicted fatigue only directly, while depression only indirectly through disability and sleep disturbance. Also morning stiffness and symptom duration predicted fatigue through disability and depression. All predictors accounted for 65% of the variance of fatigue. Depression, pain, and disability predicted sleep disturbance. Depression had reciprocal relationship with disability and they both were predicted by pain directly and indirectly. In summary, pain, depression, disability, sleep disturbance, morning stiffness, and symptom duration contributed to the fatigue of patients with rheumatoid arthritis. The best predictor of fatigue was pain. This finding indicates that the modification of pain, depression, disability, sleep disturbance, morning stiffness could be nursing intervention for relief or prevention of fatigue.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.2
• /
• pp.147-153
• /
• 2005

Objectives: Studies on the geographical differences in mortality tend to use a census population, rather than a registration population, as the denominator of mortality rates in South Korea. However, an administratively determined registration population would be the logical denominator, as the geographical areas for death certificates (numerator) have been determined by the administratively registered residence of the deceased, rather than the actual residence at the time of death. The purpose of this study was to examine the differences in the total number of a district population, and the associated district-specific mortality indicators, when two different measures as a population denominator (census and registration) were used. Methods: Population denominators were obtained from census and registration population data, and the numbers of deaths (numerators) were calculated from raw death certificate data. Sex- and 5-year age-specific numbers for the populations and deaths were used to compute sex- and age-standardized mortality rates (by direct standardization methods) and standardized mortality ratios (by indirect standardization methods). Bland-Altman tests were used to compare district populations and district-specific mortality indicators according to the two different population denominators. Results : In 1995, 9 of 232 (3.9%) districts were not included in the 95% confidence interval (CI) of the population differences. A total of 8 (3.4%) among 234 districts had large differences between their census and registration populations in 2000, which exceeded the 95% CI of the population differences. Most districts (13 of 17) exceeding the 95% CI were rural. The results of the sex- and age-standardized mortality rates showed 15 (6.5%) and 16 (6.8%) districts in 1995 and 2000, respectively, were not included in the 95% CI of the differences in their rates. In addition, the differences in the standardized mortality ratios using the two different population denominators were significantly greater among 14 districts in 1995 and 11 districts in 2002 than the 95% CI. Geographical variations in the mortality indicators, using a registration population, were greater than when using a census population. Conclusion: The use of census population denominators may provide biased geographical mortality indicators. The geographical mortality rates when using registration population denominators are logical, but do not necessarily represent the exact mortality rate of a certain district. The removal of districts with large differences between their census and registration populations or associated mortality indicators should be considered to monitor geographical mortality rates in South Korea.

• Korean Journal of Food Science and Technology
• /
• v.28 no.5
• /
• pp.953-958
• /
• 1996

A simple and rapid ELISA (enzyme-linked immunosorbent assay) system for fumonisins, a group of potentent carcinogen, was developed. To produce anti-fumonisin B1 (FB1) antibodies, FB1 conjugated to keyhole lympet hemocyanin (KLH) and Freund's adjuvant were immunized into rabbits subcutaneously 3 times. From one of the antisera showing high titer and good competition with the toxin in ELISA, polyclonal antibodies were purified. The cross-reactivities of the antibodies against fumonisin $B_1,\;B_2\;and\;B_3$ were 100%, 69%, and 166%, respectively. When competitive direct ELISA established by use of the antibody was applied to the spike test of $FB_1$ onto uncontaminated corns, the assay recovery was unstable unless 75% methanol extracts of corn were diluted to 1/100 with buffer. In that condition the mean ELISA recovery of FB1 from corns spiked $1-30\;{\mu}g/g$ was 67% and stable (coefficient of variation (CV) of each recovery percentage, 3.4%). The results suggest that the ELISA system established in this study needs no cleanup procedure and therefore would be powerful to screen a large number of corn samples contaminated with fumonisins.

• Fire Science and Engineering
• /
• v.34 no.1
• /
• pp.11-17
• /
• 2020

As performance-based design (PBD) has a direct impact on evacuation safety assessments, designing fire scenarios based on real fire tests is essential. To improve the reliability of the PBD for fire safety in multiplexes, information on fire behavior, such as heat release rate (HRR) and fire spread rate, are provided in this study by conducting a standard fabric flammability test. To this end, several chairs were arranged in a pattern that resembled a theater-style seating. The peak HRR and heating value per unit mass for each chair ranged from 415 kW to 988 kW and 15.2 MJ/kg to 23.8 MJ/kg, respectively. The heating values per unit mass of the new and old chairs were 23.6 MJ/kg and 16.7 MJ/kg, respectively. As the quantity of plastic and cushioning materials in the new chairs was more than that of the old ones, the new chairs were more vulnerable to fire hazards. Furthermore, when the chairs were arranged in a line, the fire spread rate was observed to be 0.39-0.42 m/min, regardless of the ignition location. Finally, a fire growth curve showing the peak HRR and fire spread rate was also demonstrated.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.8 no.3
• /
• pp.205-217
• /
• 2006

Rock and discontinuities are main factors consisting of a rock mass and the physical properties of each factor have direct effects on the mechanical stability of artificial structures in the rock mass. Because physical properties of the rock and discontinuities change a lot according to the size of test materials, a close attention is needed when the physical properties, obtained from laboratory tests, are used for the design of field structures. In this study, change of physical properties of intact materials due to the change of their size are studied. Six kinds of artificial materials including crystal, instead of an intact rock, are adopted for the study to guarantee the homogeneity of specimen materials even with relatively large size. Uniaxial strength and Young's modulus of each artificial material are checked out for a size effect and compared with the predicted values by Buckingham's theorem - dimensional analysis. A numerical analysis using PFC (Particle Flow Code) is also applied and primary factors influencing on the size effect are investigated.