• Title/Summary/Keyword: direct test

Search Result 3,324, Processing Time 0.029 seconds

Spinal Cord Infarction after C7 Transforaminal Epidural Steroid Injection Using Dexamethasone (덱사메타손을 이용한 경추 7번 경막 외 스테로이드 주사 후 척수 경색)

  • Lee, Jong Hwa;Kim, Young Sam;Kim, Sang Beom;Lee, Kyeong Woo;Kim, Young Hwan
    • Clinical Pain
    • /
    • v.19 no.2
    • /
    • pp.116-119
    • /
    • 2020
  • Cervical transforaminal epidural steroid injection (TFESI) is commonly performed to provide relief of pain caused by radiculopathy. Intra-arterial injection of particulate steroid or direct needle injury can lead to spinal artery embolism or thrombosis. Also there is a possibility of vascular spasm. To our knowledge, this is the first reported case of spinal cord infarction that occurred after TFESI with non-particulate steroid in Korea. A 47-year-old female patient underwent C7 TFESI at local pain clinic. Injected materials were dexamethasone and mepivacaine. Right after the intervention, she felt muscle weakness and decreased sensation. On physical examination, she had decreased sensation from C4 to T2 dermatome in light touch and pin-prick test. Proprioception and vibration were intact. The motor grades of upper extremities were grade 1. Cervical and thoracic spine MRI was checked. Diffusion-weighted image and apparent diffusion coefficient image showed long extension of spinal cord infarction from C2 to T1 level.

Study on Non-destructive Assessment of Compressive Strength of Rock Using Impact Force Response Signal (타격력 응답신호를 이용한 암석의 비파괴 압축강도 산정방법에 관한 연구)

  • Son, Moorak;Seong, Jinhyun
    • Journal of the Korean GEO-environmental Society
    • /
    • v.23 no.10
    • /
    • pp.13-19
    • /
    • 2022
  • This paper is to provide the results of usability of the impact force response signal induced from initial and successive rebound impacting a rock specimen for assessing the compressive strength of rock non-destructively. For this study, a device was devised for impacting a rock specimen and a system for measuring the impact force was set up. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Three different kinds of rock specimen were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal induced from initial and rebound impacts was compared with the directly measured compressive strength for each rock specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of rock can be assessed non-destructively using total impact force signal energy.

Correlation between Concerns about the Infection of Economic Workers due to the COVID-19 Pandemic and the Practice of Tooth Brushing after Lunch

  • Kim, Min-Young
    • Journal of dental hygiene science
    • /
    • v.22 no.3
    • /
    • pp.180-190
    • /
    • 2022
  • Background: Like direct infection from COVID-19, psychological concern about infection could affect health. Concern about COVID-19 infection was associated with individual habits to practice rules for preventing infection. Therefore, this study aimed to check occupational types and whether to practice tooth brushing after lunch depending on the occupation of economic workers and find correlations between concerns about infection due to COVID-19 pandemic and tooth brushing after lunch. Methods: The raw data was from the community health survey conducted in 2020. Among 229,269 adult participants aged 19 years and older, 138,970 economic workers were included in the final analysis. The chi-squared test was used to find differences in psychological concerns due to the COVID-19 pandemic. According to the participants, the rate of practicing tooth brushing after lunch was based on COVID-19-related psychological concerns. Multiple logistic regression analysis was conducted to check the influence of psychological concerns due to the COVID-19 pandemic on the rate of practicing tooth brushing after lunch. Results: According to occupational classifications, professionals and office workers and career soldiers had 1.551- and 1.581-times higher practicing rates than managers, respectively, whereas machine operators, agricultural and fishery sector workers, and daily laborers had lower practicing rates. Regarding COVID-19-related psychological concerns, the group with a lower concern about infection had a 1.076 times higher practicing rate than that with greater concern. The group with greater concern about blame from neighbors had 1.119 times higher practicing rate than that with lower concern. Conclusion: The correlations between higher economic workers' concerns about infection and blame from neighbors and higher recognition of the necessity to prevent COVID-19 and practice tooth brushing after lunch were confirmed. It is necessary to prepare measures for practicing tooth brushing after lunch suitable to the characteristics of occupational types and work environments of economic workers.

Effects of Half Squats with Kinesio Taping on Trunk and Lower Extremity Muscle Activity and Balance Ability in University Students (키네시오 테이핑을 병행한 하프 스쿼트 훈련이 일반인의 몸통과 다리 근활성도 및 균형능력에 미치는 영향)

  • Kim, Kyung-Hun
    • PNF and Movement
    • /
    • v.20 no.2
    • /
    • pp.253-262
    • /
    • 2022
  • Purpose: The aim of this study was to identify the effects of performing the half squat exercise with Kinesio taping (HSEKT) on trunk and lower extremity muscle activity and balance ability in general university students. Methods: The 32 participants were randomly assigned to either the HSEKT group (half squats with Kinesio taping) or the control group (half squats with sham Kinesio taping). Both groups performed half squats with either Kinesio taping (HSEKT group) or sham Kinesio taping (control group) for 30 min/day, 3 times/week for 6 weeks. The Noraxon mini direct transmission system (DTS) electromyography (EMG) system was used to evaluate trunk and lower extremity muscle activity. BioRescue equipment was used to measure the movement area of the center of pressure with eyes open and eyes closed. The muscle activity of the trunk and lower extremities and the balance ability of all participants were measured before and after the intervention. An independent t-test was used to statistically analyze the pre- and post-intervention EMG and balance ability results. Results: The trunk and lower extremity muscle activity was found to have significantly improved in the HSEKT group and the control group after the intervention (p < 0.05). Also, the balance ability of the HSEKT group differed significantly after 6 weeks of training compared to that of the control group (p < 0.05). Conclusion: The findings of this study show that performing half squats with Kinesio taping had a positive effect on trunk and lower extremity muscle activity and balance ability in general university students.

The Study of Failure Mode Data Development and Feature Parameter's Reliability Verification Using LSTM Algorithm for 2-Stroke Low Speed Engine for Ship's Propulsion (선박 추진용 2행정 저속엔진의 고장모드 데이터 개발 및 LSTM 알고리즘을 활용한 특성인자 신뢰성 검증연구)

  • Jae-Cheul Park;Hyuk-Chan Kwon;Chul-Hwan Kim;Hwa-Sup Jang
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.60 no.2
    • /
    • pp.95-109
    • /
    • 2023
  • In the 4th industrial revolution, changes in the technological paradigm have had a direct impact on the maintenance system of ships. The 2-stroke low speed engine system integrates with the core equipment required for propulsive power. The Condition Based Management (CBM) is defined as a technology that predictive maintenance methods in existing calender-based or running time based maintenance systems by monitoring the condition of machinery and diagnosis/prognosis failures. In this study, we have established a framework for CBM technology development on our own, and are engaged in engineering-based failure analysis, data development and management, data feature analysis and pre-processing, and verified the reliability of failure mode DB using LSTM algorithms. We developed various simulated failure mode scenarios for 2-stroke low speed engine and researched to produce data on onshore basis test_beds. The analysis and pre-processing of normal and abnormal status data acquired through failure mode simulation experiment used various Exploratory Data Analysis (EDA) techniques to feature extract not only data on the performance and efficiency of 2-stroke low speed engine but also key feature data using multivariate statistical analysis. In addition, by developing an LSTM classification algorithm, we tried to verify the reliability of various failure mode data with time-series characteristics.

Assessment of extreme precipitation changes on flood damage in Chungcheong region of South Korea

  • Bashir Adelodun;Golden Odey;Qudus Adeyi;Kyung Sook Choi
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2023.05a
    • /
    • pp.163-163
    • /
    • 2023
  • Flooding has become an increasing event which is one of the major natural disasters responsible for direct economic damage in South Korea. Driven by climate change, precipitation extremes play significant role on the flood damage and its further increase is expected to exacerbate the socioeconomic impact in the country. However, the empirical evidence associating changes in precipitation extremes to the historical flood damage is limited. Thus, there is a need to assess the causal relationship between changes in precipitation extremes and flood damage, especially in agricultural region like Chungcheong region in South Korea. The spatial and temporal changes of precipitation extremes from 10 synoptic stations based on daily precipitation data were analyzed using the ClimPACT2 tool and Mann-Kendall test. The four precipitation extreme indices consisting of consecutive wet days (CWD), number of very heavy precipitation wet days (R30 mm), maximum 1-day precipitation amount (Rx1day), and simple daily precipitation intensity (SDII), which represent changes in intensity, frequency, and duration, respectively, and the time series data on flooded area and flood damage from 1985 to 2020 were used to investigate the causal relationship in the ARDL-ECM framework and pairwise Granger causality analysis. The trend results showed that majority of the precipitation indices indicated positive trends, however, CWD showed no significant changes. ARDL-ECM framework showed that there was a long-run relationship among the variables. Further analysis on the empirical results showed that flooded area and Rx1day have significant positive impacts on the flood damage in both short and long-runs while R30 mm only indicated significant positive impact in the short-run, both in the current period, which implies that an increase in flooded area, Rx1day, and R30 mm will cause an increase in the flood damage. The pairwise Granger analysis showed unidirectional causality from the flooded area, R30 mm, Rx1day, and SDII to flood damage. Thus, these precipitation indices could be useful as indicators of pluvial flood damage in Chungcheong region of South Korea.

  • PDF

Effect of Iron-coated Seed on a Healthy Rice Seedling Raising Nursery in Machine Transplanting (Growth Chamber에서 철분코팅 벼 종자의 발아 및 유묘생육 특성)

  • Park, Kwang Ho;Kim, Yang Sik;Chang, Jin Tack
    • Journal of Practical Agriculture & Fisheries Research
    • /
    • v.16 no.1
    • /
    • pp.17-24
    • /
    • 2014
  • The experiment was conducted at the growth chamber to determine germination, seedling growth and fresh weight between the untreated control and iron-coated seeds in germination test of the rice seeds. There was of 95% germination in rice seeds regardless of treatments and days for seedling emergence was relatively 13-14days. Seedling height was 4.9cm of the iron-coated seeds but 0.4cm of the untreated control and there was 6.S roots of seedling in iron-coated seeds and 5.5 roots of seedling in the untreated control, respectively. The fresh weight of seedling was 107mg of the iron-coated seeds and 66mg of the untreated control at 35days after sowing.

The effect of grandparenting on the grandparent's depression: Focusing on comparison between three generation family and non-three generation family (손자녀 양육이 조부모의 우울감에 미치는 영향 : 3세대 가족과 비3세대 가족의 비교를 중심으로)

  • Won, Seojin
    • Korean Journal of Social Welfare Studies
    • /
    • v.42 no.3
    • /
    • pp.33-56
    • /
    • 2011
  • The purpose of this study is to investigate the effect of grandparenting on the grandparent's level of depression. In addition, it is to test the mediating effect of social support and the moderating effect of household type on the relationships between variables. The 555 grandparent sample in this study was from the Korean Longitudinal Study of Aging(KLoSA). The findings indicated that grandparenting(grandparenting time per day and total weeks of grandparenting per year) was significantly related to the grandparent's level of depression. In addition, the grandparent's age was also associated with grandparenting, grandparent's depression, and social support. Grandparent's health condition and marital status was associated with social support. Grandparent's gender had a significant relationship with grandparent's depression and grandparenting time per day. Social support had a direct effect to the grandparent's depression; however, it was not a statistically significant mediator between grandparenting and grandparent's depression. In addition, household type was not a significant moderator of measuring the relationships among grandparenting, grandparent's depression, and social support. Implications for social work practice were discussed based on the result of the study.

Analysis of Levelized Cost of Electricity for Type of Stationary Fuel Cells (발전용 연료전지 형식에 따른 균등화 발전비용 분석)

  • DONGKEUN LEE;TORRES PINEDA ISRAEL;YONGGYUN BAE;YOUNGSANG KIM;KOOKYOUNG AHN;SUNYOUP LEE
    • Journal of Hydrogen and New Energy
    • /
    • v.33 no.6
    • /
    • pp.643-659
    • /
    • 2022
  • For the economic analysis of fuel cells, levelized cost of electricity was calculated according to the type, capacity, and annual production of the fuel cells. The cost of every component was calculated through the system component breakdown. The direct cost of the system included stack cost, component cost, assembly, test, and conditioning cost, and profit markup cost were added. The effect of capacity and annual production was analyzed by fuel cell type. Sensitivity analysis was performed according to stack life, capital cost, project period, and fuel cost. As a result, it was derived how much the economic efficiency of the fuel cell improves as the capacity increases and the annual production increases.

The Thickness of Shear Zone in Granular Materials Using Digital Image Processing (DIP 기법을 이용한 조립토의 전단영역 크기 분석)

  • Min, Tuk-Ki;Kim, Chi-Young
    • Journal of the Korean Geotechnical Society
    • /
    • v.22 no.8
    • /
    • pp.89-97
    • /
    • 2006
  • This study investigated the effect of relative density on the thickness of shear zone. Digital image processing was used to measure the thickness of shear zone under plane strain conditions. A suitable epoxy resin was injected into the sample and the thickness of the shear zone was investigated. Four independent condition samples were prepared and the thickness of the shear zone was measured. The results indicated that the thickness of shear zone increases as the initial density of sample increases, and during the shear, the void ratios of the shear zone were changed, but the thickness of shear zone was not changed. In addition, the result of measurement of the thickness showed that the thickness of shear zone was almost fixed before critical state, but beyond critical state, the thickness of shear zone sharply increases as relative density increases.