• Journal of the Korean Home Economics Association
• /
• v.41 no.6
• /
• pp.1-12
• /
• 2003

The purpose of this study were to analyze the anthropometric data of feet of Korean women with aging, to categorize the women's foot shapes, and to compare the shoe size according to the foot shapes in order to provide the basic information for more comfortable shoes. Subjects of this study were 181 women over age 20. They were measured with the direct measurement method and the indirect measurement method. 26 items were measured from the right foot and 6 items were taken on foot outline. Factor analysis, cluster analysis, analysis of variance, post-hoc test, and cross tabs were peformed for statistical analysis of the data by SPSS program. There were significant differences in height items, breadth items, girth items, and angle items by subjects' age. The older subjects' feet were wide and thick with big deformity on toes. The arch height of the older ones was low. This implicates that the degree of deformity on toes, the foot ratio, the foot girth, the foot breath and the arch height as well as the foot length are needed to be considered in developing comfortable shoes. Nine foot construction factors were extracted by the factor analysis of anthropometric measurements; foot size factor, heel and instep factor, malleolus lateralis factor, malleolus medialis factor, foot shape factor, shape of toes factor, heel height factor, big toe height factor, and internal factor. On the basis of the cluster analysis, three different foot shapes were categorized. Type 1 was large and wide foot with little deformity on little toe. Type 2 was medium foot with deformation of big toe, and with the lowest arch height. Type 3 was small and narrow foot with the highest arch height. Distribution of shoe size according to the foot shape was analyzed. The ball of foot breath was of wide distribution than the ball of foot girth. This implicates that girth items and breath items of the foot should be enclosed for the same foot length in the shoe sizing system.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.47.2-47.2
• /
• 2014

Several studies have reported the presence of sodium excess objects having neutral atomic absorption lines at $5895{\AA}$ (NaD) and $8190{\AA}$ that are deeper than expected based on stellar population models that match the stellar continuum. The origin of these lines is therefore hotly debated. van Dokkum & Conroy proposed that low-mass stars (0.3M) are more prevalent in massive early-type galaxies, which may lead to a strong NaI 8190 line strength. It is necessary to test this prediction, however, against other prominent optical line indices such as NaD, Mgb, and Fe5270, which can be measured with a significantly higher signal-to-noise ratio than NaI 8190. We identified a new sample of roughly one thousand NaD excess objects (NEOs; ~8% of galaxies in the sample) based on NaD line strength in the redshift range 0.00$H{\beta}$ line strengths and significant emission lines, which are indicative of the presence of young stellar populations. This result implies that the presence of the interstellar medium and/or dust contributes to the increase in NaD line strengths observed for these galaxies.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.151-163
• /
• 1998

The purpose of this study is to find options which reduce the job stress and to enhance morale through a variable analysis, and also apply this data in the legal and administration fields. The data for the research was obtained from 217 dental hygienists working in the dental clinics, dental hospitals and university's dental hospitals' in Seoul. The tool used by this study was a Questionnaire measuring on-the-job stress of dental hygienists, was a modified and revised. The Questionnaire version used to measure bank's job stress and used to suggest options by Dae-ha Yoon(1991). Classification of items for measuring job stress was based on Theoretical Study on Job Stress by Dae-hyon Song(1986). The scale used in study was the two points (yes or no in the job stress) scale measuring for variables. The period of data collection was 30 days from December 4, 1995 to January 5, 1996. The methods of data collection were self-writing, direct visit, and postal Questionnaire answering, 224 copies of Questionnaire data were collected, but only 217 copies were used. 7 copies could not be analyzed, were not used for this study. The data analysis was conducted by SPSS after coding the collected raw data. The general characteristics was obtained from real digits and percentages. In order to analyze the difference of sub-variables against the job stress based on general characteristics. Mean, Standard Deviation, and F test (ANDVA) were conducted. The following were the results of job stress variables: 1. Meaningful variable affecting the working organization, is compensation system(p〈0.03). 2. Meaningful variable affecting the working period, is work overload(p〈0.02). 3. Meaningful variable affecting average patients per day, is the career management and payment(p〈0.04, p〈0.01). 4. Meaningful variable affecting number of staff, is the comrade relationship, role conflict among patients, work overload, and job overload(p〈0.000, p〈0.05, p〈0.04, p〈0.01). The comrade relationship is most affected to the number of staffs aides. 5. Meaningful variables affecting job diversion, are the desire and value, the non-role play, and the environment(p〈0.003, p〈0.02, p〈0.005).

• Korea Journal of Hospital Management
• /
• v.14 no.1
• /
• pp.62-98
• /
• 2009

A systematic review of the literatures was conducted to evaluate the effect of clinical practice guideline. The 77 studies were identified from a computerized search of published research on MEDLINE, Science-Direct and Blackwell synergy from January, 1997 to October, 2007. The main search terms were "clinical practice guideline" and "effectiveness", "clinical practice guideline" and "impact", "clinical practice guideline" and "evaluation". These studies were assessed the Quality twice by one Qualified expert and converted into weighted scale. The 63 studies were eligible inclusion criteria and subdivided into type of effect. Final indicator using for policy effect of clinical practice guidelines were classified as 4 categories; "improvement of outcomes" in 81 studies, "betterment in practice patterns" in 68 studies, "rationalization in resource utilization" in 84 studies and "cost containment" in 31 studies. The vote-counting method, one of meta-analysis method, was applied to summarized the effect of clinical practice guidelines and test statistically. From results of meta analysis, all indices were statistically significant. In conclusion, this meta-analysis showed that introduction of clinical practice guidelines were resulted positive outcomes in health policy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.661-669
• /
• 1999

A probe card is one of the most important pan of test systems as testing IC(integrated circuit) chips. This work was related to bump-type silicon vertical probe card which enabled simultaneous tests for multiple semiconductor chips. The probe consists of silicon cantilever with bump tip. In order to obtain optimum size of the cantilever, the dimensions were determined by FEM(finite element method) analysis. The probe was fabricated by RIE(reactive ion etching), isotropic etching, and bulk-micromachining using SDB(silicon direct bonding) wafer. The optimum height of the bump of the probe detemimed by FEM simulation was 30um. The optimum thickness, width, and length of the cantilever were 20 $\mum$, 100 $\mum$,and 400 $\mum$,respectively. Contact resistance of the fabricated probe card measured at contact resistance testing was less than $2\Omega$. It was also confirmed that its life time was more than 20,000 contacts because there was no change of contact resistance after 20,000 contacts.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.6
• /
• pp.855-859
• /
• 2014

Quality criteria for interaction between a pantograph and overhead contact wire is a most important requirement to assess of the performance for the current collection system. Interaction performance between pantograph and catenary system is subject to approval by the infrastructure manager when a new design and contraction of overhead contact line and pantograph are installed. Among the various performance, percentage of arcing at maximum line speed is a simple test method compared with contact force of pantograph due to direct sensing of pantagraph, calibrations, installations of train, and etc. On the other hand, percentage of arcing is need to reliable arcing detector and general requirements with accordance with EN 50317. In this paper, percentage of arcing are investigated on the function of duration of arc and proposed which is satiable of percentage of arcing. As a results, we proposed which duration of arcs are unsuitable from infrastructures point of view as performance testing for quality of current collection.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.880-886
• /
• 2014

Many railway signalling functions have increasingly depended on computer software with recent development in computing technology, leading to evolution into more flexible and intelligent railway signalling system. Meanwhile, software programs are likely to have many errors and the cost incurred by such errors has increased. Especially, if fatal software error occurs during railway operation, it may result in loss of lives. So the software verification and validation have become more important. It is needed for software functional safety tool to support these, but most commercial tools depend on direct access to the system's memory, resulting in many difficulties in application. Owing to such difficulties and complexity, they are rarely used in railway signalling system software validation. In this study, a new testing tool for software functional testing through an external interface that can be easily used in functional testing of software was developed. Such testing tool allows development and analysis of test cases for black-box testing through analysis of actually used interface protocols, leading to increased user convenience.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.6
• /
• pp.727-737
• /
• 2011

Objective: This study aimed to analyze somatotype characteristics of the women of 20's, 30's 40's and 50's and thus to provide the basis for developing pants patterns by the age groups. Background: Despite many previous researches for the somatotype characteristics of adult women, few studies have considered age groups. Method: The data of the $5^{th}$ anthropometry by Size Korea were analyzed for the purpose. The 32 direct body measurements and the 32 indexes of 2,213 women aged 20~59 were analyzed. In order to compare somatotype characteristics among the age groups, an ANOVA and a Tukey test were used. Results: The women in 20's were the tallest among the age groups, and had the smallest waist circumference and hip circumference. Their waist breadths were also the narrowest. They had a slim and long body type but their calves were relatively thick. The 30's women were smaller, shorter with the height and length items than the 20's were. They were bigger, wider and deeper with the circumference, breadth and depth items than the 20's were and they were heavier. On the other hand, their hip circumference and crotch length were in the same group as the women in 20's. The crotch length(omphalion) of the 40's women was the longest among all the age groups and the crotch length(natural indentation) of the 40's women was in the same as the women in 50's. The women in 50's were the smallest and heaviest among all the age groups. The difference between their hip circumferences and waist circumferences was the smallest. They had an obese abdomen and sagged hips. Conclusions: The somatotype characteristics of the age groups were significantly different, and thus it is suggested to develop skirt and pants patterns for each age group. Application: The skirt and pants patterns for the somatotype characteristics of the women by age groups will be developed through the body feature data of this study.

• Geomechanics and Engineering
• /
• v.12 no.2
• /
• pp.295-312
• /
• 2017

Cast in situ and grouted concrete helical piles with 150-200 mm diameter half cylindrical ribs have become an economical and effective choice in Shanghai, China for uplift piles in deep soft soils. Though this type of pile has been successful used in practice, the reinforcing mechanism and the contribution of the ribs to the total resistance is not clear, and there is no clear guideline for the design of such piles. To study the inclusion of ribs to the contribution of shear resistance, the shear behaviour between silty sand and concrete slabs with parallel ribs at different spacing and angles were tested in a large direct shear box ($600mm{\times}400mm{\times}200mm$). The front panels of the shear box are detachable to observe the soil deformation after the test. The tests were modelled with three-dimensional finite element method in ABAQUS. It was found that, passive zones can be developed ahead of the ribs to form undulated failure surfaces. The shear resistance and failure mode are affected by the ratio of rib spacing to rib diameter. Based on the shape and continuity of the failure zones at the interface, the failure modes at the interface can be classified as "punching", "local" or "general" shear failure respectively. With the inclusion of the ribs, the pull out resistance can increase up to 17%. The optimum rib spacing to rib diameter ratio was found to be around 7 based on the observed experimental results and the numerical modelling.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.31 no.4
• /
• pp.425-431
• /
• 2007

[ $Al_2O_3/SiC$ ]composite ceramics were sintered to evaluate the bending strength and elastic wave characteristics. The three-point bending test was carried out under room temperature. The elastic wave was detected by fracture wave detector. The crack healing behavior was investigated from 1373 K to 1723 K. The bending strength of $Al_2O_3/SiC$ composite by nanocomposite is higher than that of $Al_2O_3$ monolithic. Crack-healing behavior depended on an amount of additive powder $Y_2O_3$. In $Al_2O_3/SiC$ composite ceramics with 3 wt. % $Y_2O_3$ for additive powder, the bending strength at 1573 K is about 100% increase than that of the smooth specimens. From the result of wavelet analysis of elastic wave signal, the smooth specimen and heat treated specimen of $Al_2O_3$ monolithic and $Al_2O_3/SiC$ composite ceramics showed characteristics of frequency about 58 kHz. The strength of $Al_2O_3/SiC$ composite ceramics was a little higher than those of $Al_2O_3$ monolithic. The dominant frequencies were high with increasing of $Y_2O_3$ for additive powder. The dominant frequencies had direct connection with the bending strength.