• 터널과지하공간
• /
• 제15권3호
• /
• pp.228-235
• /
• 2005

Hoek-Brown의 파괴기준식으로부터 암반의 내부마찰각 및 점착강도를 계산한 후, Mohr-Coulomb의 항복함수를 이용하여 소성 보정이 적용될 수 있는 것으로 알려져 있다. 하지만 본 연구에서는 이러한 계산 과정이 연약 암반이나 낮은 봉압 조건의 암반에 대해서는 적합하지 않다는 사실을 보여주고자 한다. 즉, Hoek-Broun 재료 모델로부터 직접 및 간접적 적용에 의해 소성 보정을 수행하는 과정을 제시하였으며, 이를 통해 직접적 적용이 간접적 적용에 비해, 비선형 파괴면을 더욱 효과적으로 모사할 수 있고, 특히 봉압이 낮은 응력 조건에서 효과적임을 보여주고자 한다.

• 대한안전경영과학회지
• /
• 제12권2호
• /
• pp.55-64
• /
• 2010

This study tried to focus on nontraditional job that has not been studied in terms of the subjects associated with MSDs(Musculoskeletal Disorders). Specifically, dental procedure was the job to be analyzed in this study. An alternative method as well as a traditional method for viewing teeth while performing simulated dental procedures. Four graduated students did both methods(direct view and indirect view) as the subjects in this study. The method based on indirect view used a video camera and monitor to view the teeth. The experiment was conducted five times for each subject. The major findings in this study were as follows; 1) Job speed was increased with the repetitions for both methods, 2) Difference of Neck flexion between direct and indirect methods was statistically siginificant(Neck flexion for indirect method was dramatically decreased), 3) Difference of job speed between direct and indirect methods was statistically significant(Job speed for direct method was faster than that of indirect method), 4) Difference of error rate between direct and indirect methods was statistically significant(error rate for direct method was lower than that of indirect method), 5) Even though indirect method did not provide better performance in terms of job speed and error rate yet, it seemed to need a trade-off between two methods in the future since indirect method provided better working postures than that of direct method.

• 대한한의학회지
• /
• 제35권1호
• /
• pp.99-113
• /
• 2014

Objectives: To provide theoretical basis for the classification of medicinal moxibustion(藥灸劑) in Health Insurance Medical Benefit in Korea through investigating trend of judicial precedents on indirect moxibustion and usage of medicinal moxibustion in "Donguibogam". Methods: We analyzed statistical data of moxibustion from Health Insurance Review & Assessment Service and National Health Insurance Statistical Yearbook. We investigated major judicial precedents on indirect moxibustion to find out some trend and we searched the usages of medicinal moxibustion in "ZhenJiuDaCheng" and "Donguibogam". Results: According to recent judicial precedents, indirect moxibustion with equipment is no loner regarded as Korean Medical Procedure. In composition of 'Oriental Health Treatment', amount for acupuncture has gradually decreased instead, amount for moxibustion has increased steadily for 5 years. Medicinal moxibustion(藥灸劑) is often used as a form of indirect medicinal moxibustion with moxa in "Donguibogam". Argyi Folium, Moschus, Natrii Chloridium, Radix Preparata, Realgar and Olibanum are most frequently used for medicinal moxibustion in "Donguibogam". Medicinal moxibustions are composed of simple prescription or herb-pair or multiple prescription in "Donguibogam". Conclusions: In Health Insurance Medical Benefit in Korea, under the division of moxibustion, direct medicinal moxibustion and indirect medicinal moxibustion should be classified in addition.

• 대한치과의사협회지
• /
• 제50권7호
• /
• pp.368-376
• /
• 2012

The demand for tooth-colored restorations has grown considerably during the last decade. Posterior composite restorations have risen in popularity as a result of the development of improved resin composites, bonding systems and operating techniques. A major limitation of direct composite restoration is the difficulty of controlling the polymerization shrinkage. To overcome this limitation, the indirect fabrication of a composite restoration and cementation with resin cement has been advocated. Unfortunately, the current available resin cements with indirect restorations do not always bond to dentin as strongly as dentin adhesive systems bond with direct resin composite restorations. Several procedural strategies have been proposed for indirect composite restoration. In this regard, the rationale for the indication, characteristics and clinical application is described in this paper. As a result, we will try to suggest the evidence-based guidelines for indirect composite restorations by reviewing each available indirect composite products, technical procedure and pronosis.

• Advances in concrete construction
• /
• 제1권1호
• /
• pp.85-102
• /
• 2013

Prior concrete strength distributions can be updated by using direct information from test results as well as by taking into account indirect information due to conformity control. Due to the filtering effect of conformity control, the distribution of the material property in the accepted inspected lots will have lower fraction defectives in comparison to the distribution of the entire production (before or without inspection). A methodology is presented to quantify this influence in a Bayesian framework based on prior knowledge with respect to the hyperparameters of concrete strength distributions. An algorithm is presented in order to update prior distributions through numerical integration, taking into account the operating characteristic of the applied conformity criteria, calculated based on Monte Carlo simulations. Different examples are given to derive suitable hyperparameters for incoming strength distributions of concrete offered for conformity assessment, using updated available prior information, maximum-likelihood estimators or a bootstrap procedure. Furthermore, the updating procedure based on direct as well as indirect information obtained by conformity assessment is illustrated and used to quantify the filtering effect of conformity criteria on concrete strength distributions in case of a specific set of conformity criteria.

• 대한가정학회지
• /
• 제40권5호
• /
• pp.179-193
• /
• 2002

This study aims to examine the forming procedure of consumer satisfaction from Internet shopping experience. Many studies on the satisfaction have primarily focused on the examination of the antecedents of satisfaction along with the expectation-disconfirmation paradigm dominating the former studies. This study has built an Internet shopping expectation-disconfirmation model as to apply the expectation-disconfirmation into the condition of the Internet shopping. The summary of study represented in following. l. The expectation of risk and performance of benefit had a significantly positive effect on the perceived disconfirmation. In addition, an expectation of benefit and performance of risk had a significantly negative effect on the perceived disconfirmation. 2. A performance of risk and performance of benefit not only had a significantly indirect effect, but also a significantly direct effect on the consumer satisfaction. But expectation of risk and expectation of benefit had no significant direct effect on satisfaction. 3. Not only the perceived disconfirmation had a significant positive effect on satisfaction, but also an effect of the perceived disconfirmation on satisfaction(0.472) is larger than that of the performance of risk or performance of benefit. Meaning that, it is desirable for one to apply the expectation-disconfirmation model into the Internet shopping circumstances as much as the off-line markets.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권4호
• /
• pp.189-199
• /
• 2002

This study is intended to propose a systematic procedure for the development of the conditional assessment based on the safety of structures and the cost effective performance criteria for designing and upgrading of bridge structures. As a result, a set of cost function models for a life cycle cost analysis of bridge structures is proposed and thus the expected total life cycle costs (ETLCC) including initial (design, testing and construction) costs and direct/indirect damage costs considering repair and replacement costs, human losses and property damage costs, road user costs, and indirect regional economic losses costs. Also, the optimum safety indices are presented based on the expected total cost minimization function using only three parameters of the failure cost to the initial cost (${\tau}$), the extent of increased initial cost by improvement of safety (${\nu}$) and the order of an initial cost function (n). Through the enough numerical invetigations, we can positively conclude that the proposed optimum design procedure for bridge structures based on the ETLCC will lead to more rational, economical and safer design.

• 소음진동
• /
• 제10권2호
• /
• pp.319-324
• /
• 2000

This paper shows hot to model the submerged elastic structures and adequate analysis tools for modal behavior when using finite element and boundary element method. Four different cases are reviewed depending on the location of the water and air. First case is that structures are filled with air and water is located outside. Second case is opposite to case one. These cases are solved by direct approach using collocation procedure. Third case is that water is located both sides of structures. Last case is that air is located both sides. These cases are solved by indirect approach using variational procedure. As analysis tools harmonic frequency sweep analysis and eigenvalue iteration method are selected to obtain the natural frequencies of vibrating submerged structures depending on the cases. Results are compared with closed form solutions of submerged spherical shell.

• 대한전기학회논문지
• /
• 제37권12호
• /
• pp.884-893
• /
• 1988

Adaptive controllers for linear unknown coefficient system, that is corrupted by disturbance, are designed by parameter adaptation model reference adaptive control(MRAC). This design is stemmed from the Lyapunov direct method. To reduce the model following error and to improve the convergence rate of the design, an indirect-suboptimal control law is derived. Proper compensation for the effects of time-varying coefficients and plant disturbance are suggested. In the design procedure no complete identification of unknown coefficients are required.

• 대한전기학회논문지
• /
• 제37권10호
• /
• pp.733-739
• /
• 1988

Adaptive controllers for linear system whose nominal values of coefficients only are known, that is corrupted by disturbance, are designed by signal synthesis model reference adaptive control (MRAC). This design is stemmed from the Lyapunov direct method. To reduce the model following error and to improve the conrergence rate of the design, an indirect suboptimal control law is de rived using the Hamilton Jacobi Beellman equation. Proper compensaton for the effects of time varying coefficients and plant disturbance are suggested. In the design procedure no complete identification of unknown coefficients are required.