• Journal of Environmental Science International
• /
• v.12 no.1
• /
• pp.23-34
• /
• 2003

Urban air quality is usually worse than that of rural counterpart. The contrasting atmospheric properties seem to be direct result of different urban-rural air pollutant emission. Hence, the emission estimation of air pollutants plays an important role to the atmospheric environmental management. The main purpose of this study is to find out the temporal and spatial distribution of air pollutant emission in Daegu area. For the study, the Daegu statistical yearbook and data of waste facilities and the report on traffic survey issued by Daegu metropolitan city and the statistical yearbook on the road capacity issued by the ministry of construction and transportation are used. Each item for the emission estimation is $SO_2$, CO, HC, $NO_x$, PM-10 from point, line and area source. The result were as follow; (1) The air pollutants with the highest amount of emission from the emission source is CO followed by $NO_x$, $SO_2$, PM-10, HC in descending order of magnitude. (2) The annually totaled air pollutant emission consists of 81%(73,185 ton/year) of line, 11%(9,589% ton/year) of area and 8%(7,445 ton/year) of point source in Daegu. Air polluant emission was mainly due to line sources. (3) High-emission of the air pollutants of line source appeared ariond Bukgu, Dalseonggun, Dongu and Seogu ; the areas with highway networks.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.8
• /
• pp.1041-1047
• /
• 2011

Data on 2,365 Mecheri sheep (1,201 males and 1,164 females), maintained at the Mecheri Sheep Research Station, Pottaneri, India, and recorded between 1979 and 2006, were analysed to study the growth related traits and their genetic control. The body weights at different ages (i.e. at birth, weaning (3 months), 6, 9 and 12 months) were recorded and collected from the birth and growth registers maintained in the farm. The average weights of Mecheri sheep at birth, and at 12 months of age were $2.24{\pm}0.01$ and $16.81{\pm}0.15$ kg respectively. The pre- and post-weaning average daily weight gains were $63.84{\pm}0.75$ and $29.52{\pm}0.43$ g respectively. Study revealed a significant difference with the period of lambing on body weight, weight gain and efficiency in weight gain at different stages of growth. Males were heavier and had a higher weight gain than females at almost all stages of growth and the differences tended to increase with age. The direct heritability estimates increased from birth to six months of age and then decreased. The direct heritabilities of all body weights at different stages of growth were low to moderate in magnitude and the values at birth, weaning, six, nine and 12 months of age were 0.08, 0.17, 0.21, 0.13 and 0.10 respectively. For the estimation of heritability at birth and three months body weights, the direct additive genetic and maternal additive genetic effects have to be taken into account and for the estimation of six months weight, the direct additive genetic and maternal permanent environmental effects have to be included in the model. The estimates of heritability, phenotypic and genetic correlations among the different body weights indicated that the selection for improving the body weights at different traits should be done on the basis of three or six months weight because of higher heritability estimates and having higher genetic correlations with other traits.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.900-905
• /
• 2008

I perform bit error rate(BER) analysis of orthogonal frequency division multiplexing(OFDM) systems impaired by both direct current(DC) offset and carrier frequency offset. By analyzing the BER performance for real OFDM systems employing 16-quadrature amplitude modulation(QAM) and pilot symbol estimation, the dependency of BER on the DC offset and carrier frequency offset is quantified and compared to ideal performance. Results show that the magnitude of frequency offset and DC offset are required to be less than 0.01 and 0.007, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.9 no.4
• /
• pp.93-102
• /
• 1989

A runoff model is estabilished for the direct runoff hydrograph at the watershed outlet. The watershed is divided into subareas bounded by watershed lines of stream segment. Different storage elements are used to represent the subareas which simply translate rain-fall excess to runoff and transmit flow from an upstream areas. For transmit, the relationship between flowsection and runoff is expressed by the exponential function to represent the nonlinearity of lag time, and the relationship between flowsection and stream length is expressed by the 1st order equation to represent the effect of the travel length. The parameters of lag time can be obtained by stream magnitude and the effective rain fall is routed through the main stream. Application of the model to the Bochung river basin gives accurate results, especially for the peak runoff and peak time, and is approved to be used for the prediction by stream magnitude of small watershed having no runoff records.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.491-496
• /
• 2010

The direct design modification of problematic component is disallowed in order to sacrifice other major factors such as a stability or a major performance. So, the best design policy is to risvise the immature structural medchanism under the minimal design change as soon as possible. For this paper presents a new design sensitivity analysis based on transmissibility rtio (TR) of response acceleration to find a proper candidate for the minimal design modification. The new sensitivity analysis is based on the fact that the sensitivity of TR over a small design change is inversly proportinal to the magnitude of TR. The theory of proposed design sensitivity analysis is simulated with the variance of TR over a dynamic change. Then, new methodology is appplied for a linear elastic specimen to detect the most sensitive node over a design change using measured accleration data during uni-axial vibration test, The physical verification of the sensitivity method is conducted on the CAE model of a linear elastic specimen by adding concentration mass and the vibration fatigue of the simple specimen is analyzed to estimate the relationship between fatigue behaviors and sensitivity consequences.

• Journal of Ecology and Environment
• /
• v.30 no.2
• /
• pp.201-207
• /
• 2007

Researchers have used a variety of methods to measure patterns of animal movement, including the use of spatial data (mapping the position of a moving animal at specified intervals) and direct estimation of travel path length by pacing under a moving animal or group. I collected movement data from five groups of siamangs (Symphalangus syndactylus) using two different methods concurrently to estimate the effects of the method of data collection on estimates of daily path length (DPL). Estimates of DPL produced from spatial data collected at 15-minute intervals were 12% lower than estimates of DPL produced by pacing under the traveling animal. The actual magnitude of the difference was correlated with the travel distance, but there was no correlation between the proportional difference and the travel distance. While the collection of spatial data is generally preferable, as spatial data permit additional analyses of patterns of movements in two or three dimensions, the relatively small difference between the DPL's produced using different methods suggests that pacing is an acceptable substitute where the collection of spatial data is impractical. I also subsampled the spatial data at increasing time intervals to assess the effect of sampling interval on the calculation of daily path lengths. Longer sampling intervals produced significantly shorter estimates of travel paths than shorter sampling intervals. These results suggest that spatial data should be collected at short time intervals wherever possible, and that sampling intervals should not exceed 30 minutes. Researchers should be cautious when comparing data generated using different methods.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1395-1403
• /
• 2008

The objective of the present study was to estimate genetic parameters for economic traits in Markhoz goats. Data collected from 1993 to 2006 by the Markhoz goat Performance Testing Station in Sanandaj, Iran, were analyzed. The traits recorded as body weight performance at birth (BW), weaning (WW), six month (6MW), nine month (9MW), yearling (YW) and yearling fleece weight (YFW) were investigated. Least square analyses were used for estimation of environmental effects. Genetic parameters were estimated with single and multi trait analysis using restricted maximum likelihood (REML) procedures, under animal models. By ignoring or including maternal additive genetic effects and maternal permanent environmental effects, five different models were fitted for each trait. The effects of sex, type of birth, age of dam and year of birth on the all body weights were significant (p<0.01), but had no effects on YFW except year of birth. Age of kids had significant influences on WW and 6MW (p<0.01). A log likelihood ratio test was carried out for choosing the most suitable model for each trait. Total heritability estimates for YFW and growth traits varied from 0.16 for YFW and WW to 0.41 for YW. For all traits, maternal heritability was lower than direct heritability, ranging from 0.06 for BW to 0.01 for 6MW and 9MW. The magnitude of $c^2$ was more substantial for BW than the others, and relative importance was reduced from 0.12 for BW to 0.04 for 9MW. The direct additive genetic correlations estimates were positive and varied from 0.21 between BW-YW to 0.96 between WW-6MW. Direct additive genetic correlations between YFW and body weight traits were positive and ranged from 0.14 between BW-YFW to 0.67 between 6MW-YFW. For all traits, the corresponding estimates for phenotypic correlation were positive and lower than genetic correlations. The maternal additive genetic correlations between various traits were varied and ranged from -0.19 between 9MW-YFW to 0.96 between 6MW-9MW. The estimates of the maternal permanent environmental correlations between various traits were positive and ranged from 0.33 between WW-YFW to 0.93 between WW-6MW. Also, the environmental correlations between various traits ranged from 0.01 between BW-YFW and WW-YFW to 0.70 between 9MW-YW. Estimates of genetic parameters for various traits in this study confirm that selection should be applied on WW for genetic improvement in Markhoz goats.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.3D
• /
• pp.205-212
• /
• 2012

The national highway traffic counts system consists of short duration counts and continuous counts. Unlike continuous counts, short duration counts are performed by collection of a few days period and thus, the magnitude of deviation of collected data from AADT varies depending upon when data collection takes place. Therefore, this study was done to find out the best months and days of data collection of each highway classification in order to enhance the accuracy of AADT estimation. Continuous counts, another type of the national traffic counts system, are performed by collection of 365-day period using a permanent traffic counter. Therefore, it is necessary to keep the number of days for which the counter malfunctions to a minimum in order to enhance the accuracy of data. However, from time to time the permanent traffic counter malfunctions due to various causes and thus, cannot collect data. Therefore, this study was done to find out whether the age of counter, the ratio of heavy vehicle volume to total traffic volume, etc. could be the direct causes of counter's malfunction based on the number of maintenance for a certain time period.

• Tunnel and Underground Space
• /
• v.19 no.3
• /
• pp.226-235
• /
• 2009

Force induced by the natural ventilation in tunnel is likely to generate adverse influences on the airflow during the normal operation and create even more unfavorable circumstances during the tunnel fire. The influence of the natural ventilation is required to take into account in designing and operating the ventilation as well as safety systems. The magnitude of natural ventilation force depends on a variety of factors associated with the topographical, meteorological and physical features of tunnel. Unfortunately, at this moment those are difficult to quantify and none of the countries has suggested its estimation method in the design guideline. This study aims at quantifying the natural ventilation force at a local highway tunnel by three different methods. The first method employes direct measurement of the pressure at portals, while the second applies a stepwise approach to eliminate the piston effect ahead of deriving the natural ventilation force and the third method uses the concept of barometric barrier.

• Asian-Australasian Journal of Animal Sciences
• /
• v.31 no.9
• /
• pp.1407-1414
• /
• 2018

Objective: The aim of this study was to estimate (co) variance components and genetic parameters for categorical carcass traits using Bayesian inference via mixed linear and threshold animal models in Anglonubian goats. Methods: Data were obtained from Anglonubian goats reared in the Brazilian Mid-North region. The traits in study were body condition score, marbling in the rib eye, ribeye area, fat thickness of the sternum, hip height, leg perimeter, and body weight. The numerator relationship matrix contained information from 793 animals. The single- and two-trait analyses were performed to estimate (co) variance components and genetic parameters via linear and threshold animal models. For estimation of genetic parameters, chains with 2 and 4 million cycles were tested. An 1,000,000-cycle initial burn-in was considered with values taken every 250 cycles, in a total of 4,000 samples. Convergence was monitored by Geweke criteria and Monte Carlo error chain. Results: Threshold model best fits categorical data since it is more efficient to detect genetic variability. In two-trait analysis the contribution of the increase in information and the correlations between traits contributed to increase the estimated values for (co) variance components and heritability, in comparison to single-trait analysis. Heritability estimates for the study traits were from low to moderate magnitude. Conclusion: Direct selection of the continuous distribution of traits such as thickness sternal fat and hip height allows obtaining the indirect selection for marbling of ribeye.