• Journal of The Korean Association For Science Education
• /
• v.27 no.7
• /
• pp.570-582
• /
• 2007

The purpose of this study was to analyze the causal relationship among students' science-related career choice and its factors. The causal relationship was analyzed using structural equation modeling. According to the most fitting model, science career aspiration had a direct and total effect of 0.95 (standardized coefficient) on the science career choice, and personal factor had an indirect and total effect of 0.75 on the science career choice, educational factor, 0.46, and social factor, 0.11. Personal factor had a direct and total effect of 0.79 on the science career aspiration, educational factor with total effect of 0.48 (direct effect -0.21, indirect effect 0.69), and social factor with direct and total effect of 0.12. On the other hand, educational factor had a direct and total effect of 0.72 on the social factor, and a direct and total effect of 0.77 on the personal factor. The difference in the causal effect among grades and between gender was analyzed. The difference was only in the magnitude of influence among grades, showing the same tendency with the total number of students, but the difference between gender was contrastive. For the boys, social factor had the biggest effect on the science career choice, next was personal factor, and the educational factor had the smallest effect. The girls' science career choice influenced mostly from personal factor, and the other two factors' effects were not high. The social effect was negative for the girls' science career choice. The implications of proper science career education were discussed from these results, considering the causal relationship among factors of science career choice and its factors.

• Journal of computational fluids engineering
• /
• v.6 no.4
• /
• pp.26-34
• /
• 2001

The flow past a circular cylinder forced to vibrate transversely is numerically simulated by solving the two-dimensional Navier-Stokes equations modified by the vibration velocity of a circular cylinder at a Reynolds number of 164. The higher-order finite difference scheme is employed for the spatial discretization along with the second order Adams-Bashforth and the first order backward-Euler time integration. The calculated cylinder vibration frequency is between 0.60 and 1.30 times of the natural vortex-shedding frequency. The calculated oscillation amplitude extends to 25% of the cylinder diameter and in the case of the lock-in region it is 60%. It is made clear that the cylinder oscillation has influence on the wake pattern, the time histories of the drag and lift forces, power spectral density and phase diagrams, etc. It is found that these results include both the periodic (lock-in) and the quasi-periodic (non-lock-in) state. The vortex shedding frequency equals the driving frequency in the lock-in region but is independent in the non-lock-in region. The mean drag and the maximum lift coefficient increase with the increase of the forcing amplitude in the lock-in state. The lock-in boundaries are also established from the present direct numerical simulation.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.181-188
• /
• 2001

The flow past a circular cylinder forced to vibrate transversely is numerically simulated by solving the two-dimensional Wavier-Stokes equations modified by the vibration velocity of a circular cylinder at a Reynolds number of 164. The higher-order finite difference scheme is employed for the spatial discretization along with the second order Adams-Bashforth and the first order backward-Euler time integration. The calculated cylinder vibration frequency is between 0.60 and 1.30 times of the natural vortex-shedding frequency. The calculated oscillation amplitude extends to $25\%$ of the cylinder diameter and in the case of the lock-in region it is $60\%$. It is made clear that the cylinder oscillation has influence on the wake pattern, the time histories of the drag and lift forces, power spectral density and phase diagrams, etc. It is found that these results include both the periodic (lock-in) and the quasi-periodic (non-lock-in) state. The vortex shedding frequency equals the driving frequency in the lock-in region but is independent in the non-lock-in region. The mean drag and the maximum lift coefficient increase with the increase of the forcing amplitude in the lock-in state. The lock-in boundaries are also established from the present direct numerical simulation.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.570-577
• /
• 2001

Three-dimensional time-dependent flow past a circular cylinder is numerically investigated using direct numerical simulation for Reynolds number 280 and 300. The higher-order finite difference scheme is employed for the spatial distributions along with the second order Adams-Bashforth and the first order backward-Euler time integration. In x-y plane, the convection term is applied by the 5th order upwind scheme and the pressure and viscosity terms are applied by the 4th order central difference. And in spanwise, Navier-Stokes equation is distributed using of Spectral Method. At Reynolds number 259 the two-dimensional wake becomes linearly unstable to a second branch of modes with wavelength about 1.0 diameters at onset (B-mode). Present results of three-dimensional effects of in wake of a circular cylinder is represented with spanwise and streamwise vorticity contours as Reynolds numbers.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.595-604
• /
• 2004

This study is to investigate complaining behavior of consumers who purchase fashion products on the internet, as well as to find how the complaining behaviors are related to the consumers' characteristics. The subjects of this study are limited to the consumers who have experienced dissatisfaction when purchasing fashion products through the internet. The questionnaires were administered to male and female respondents using the internet shopping mall. The results can be summarized as follows: The factor analysis shows that consumer complaining behaviors are fitted well into four factors(direct complaining behavior, private complaining behavior, third-party complaining behavior, and no response). In the difference analysis by consumer's complaining behavior styles and gender, private complaining and third-party complaining behavior were significant statistically. In the difference analysis between consumer's complaining behavior styles and internet self-efficacy. Internet self-efficacy was significantly different according to consumer's complaining behavior styles, especially for direct complaining, third-party complaining and no response. Private complaining behavior, third-party complaining behavior and no response were negatively related to consumer retention, while direct complaining behavior was not.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.13 no.1
• /
• pp.278-291
• /
• 2021

This paper applies load variation method to predict speed-power-rpm relationship along with propulsive performances in regular head waves, and to derive overload factors (ITTC, 2018). 'Calm-water tests' and 'resistance test in waves' are used. The modified overload factors are proposed taking non-linearity into consideration, and applied to the direct powering, and resistance and thrust identity method. These indirect methods are evaluated through comparing the speed-power-rpm relationships with those obtained from the resistance and self-propulsion tests in calm water and in waves. The objective ship is KVLCC2. The load variation method predicts well the speed-power-rpm relationship and propulsion performances in waves. The direct powering method with modified overload factors also predicts well. The resistance and thrust identity method with modified overload factor predicts with a little difference. The direct powering method with overload factors predicts with a relatively larger difference.

• Journal of Korean Critical Care Nursing
• /
• v.13 no.2
• /
• pp.12-23
• /
• 2020

Purpose : This study aimed to evaluate the clinical outcomes of direct interhospital transfers (IHTs) of patients with acute aortic syndrome (AAS) led by advanced practice nurses (APNs). Methods : From September 2014 to June 2017, the study retrospectively investigated 183 patients with AAS who were transferred to a high-volume tertiary hospital. Results : One hundred forty-eight (81%) patients were admitted through direct IHTs, and 35 (19%) patients were admitted through non-direct IHTs. The direct IHT group had a significantly shorter time from symptom onset to hospital arrival than the non-direct IHT group (11.4 vs. 32.1 h, p=.043). There were no significant differences in other clinical outcomes, such as peri-transfer status, mortality, hospital length of stay, and readmission, between the two groups. In the direct IHT group, 55% of transfers were led by APNs. There was no significant difference in outcomes between APN- and physician-led transfers. Conclusions : Implementation of direct IHTs markedly shortened the time from symptom onset to hospital arrival in patients with AAS. Finally, direct IHTs can potentially improve the outcomes of patients with AAS, a condition with time-dependent mortality and morbidity. In addition, APNs can effectively lead the direct IHT of patients with AAS.

• Structural Engineering and Mechanics
• /
• v.27 no.6
• /
• pp.741-771
• /
• 2007

Tests were conducted on two partially pre-stressed concrete solid beams subjected to combined loading of bending, shear and torsion. The beams were designed using the Direct Design Method which is based on the Lower Bound Theorem of the Theory of Plasticity. Both beams were of $300{\times}300mm$ cross-section and 3.8 m length. The two main variables studied were the ratio of the maximum shear stress due to the twisting moment, to the shear stress arising from the shear force, which was varied between 0.69 and 3.04, and the ratio of the maximum twisting moment to the maximum bending moment which was varied between 0.26 and 1.19. The required reinforcement from the Direct Design Method was compared with requirements from the ACI and the BSI codes. It was found that, in the case of bending dominance, the required longitudinal reinforcements from all methods were close to each other while the BSI required much larger transverse reinforcement. In the case of torsion dominance, the BSI method required much larger longitudinal and transverse reinforcement than the both the ACI and the DDM methods. The difference in the transverse reinforcement is more pronounce. Experimental investigation showed good agreement between design and experimental failure loads of the beams designed using the Direct Design Method. Both beams failed within an acceptable range of the design loads and underwent ductile behaviour up to failure. The results indicate that the Direct Design Method can be successfully used to design partially prestressed concrete solid beams which cater for the combined effect of bending, shear and torsion loads.

• Korean journal of applied entomology
• /
• v.36 no.2
• /
• pp.141-144
• /
• 1997

Studies were conducted to investigate the incidense of insect pests in transplanted and direct seeded paddy fields in southern region of Korea. Population dencities of the rice green leafhopper (RGLH: Nephotettix cincticeps Uhler) and rice leaffolder (RLF: Cnaphalocroch medinalh Guenee) were higher in machine transplanted than in direct seeded, but the brown planthopper (BPH: Nilaparvata lugens Stal) and smaller brown planthopper (SBPH: Laodelphax striatellus Fallen) were abundant in direct seeded. However, no significant difference was found between machine transplanted and direct seeded fields in the incidense of rice stem borer (RSB: Chilo suppressalis Walker), whiteback planthopper (WBPH: Sogatella furcifera Horvath), and rice stem magot (RSM: C'hlorops oryzae Matsumura). Occurrence of rice key pests were affected more by transplanting time than other cultural practices. Later transplanting induced higher populations of BPH, WBPH, SBPH, RGLH. However, RSB and RLF caused higher damage in earlier transplanted paddy field.

• Journal of Korean Academy of Nursing
• /
• v.33 no.2
• /
• pp.246-255
• /
• 2003

Purpose: This study was designed to compare direct cost and indirect cost between home care and hospital care according to subject's characteristics. Method: The subjects of this study were patients with cerebrovascular disease. They were 50 patients in six university hospitals and 49 in four home care centers. Data were collected by using two type of questionnaires and reviewing medical records, home care service records and medical-fee claims from April 4th to September 13th, 2001. Result: The results were as follows; First, there was a statistically significant difference of direct cost between home care and hospital care, however, there was not a statistically significant difference of indirect cost. Second, according to subject's characteristics, six variables had statistically significant differences; sex, age, marital status, economy, job and diagnosis. Conclusion: It was found that cost-saving effect of home care was affected by subject's characteristic factors. More study needs to be done to develop a more detailed selection criteria for home care subjects.