• Analytical Science and Technology
• /
• v.20 no.1
• /
• pp.41-48
• /
• 2007

The determination method for the trace lead and cadmium in glass materials was developed by ICP-AES. The lead- and cadmium-DDTC chelates were formed by adding Na-DDTC (sodium diethyldithiocarbamate) as a chelating agent and extracted into MIBK (methyl-isobutyl ketone). Direct measuring of the trace lead and cadmium in glass was not possible because of the interferences of matrix elements as Na, Si, Mg and Ca of glasses unless solvent extraction of lead and cadmium was applied. This procedure was confirmed to be valid quantitative method of Pb and Cd analysis in glass did not influence of sample matrix, by applying it procedure to artifact sample and NIST SRM 1412.

• Physical Therapy Rehabilitation Science
• /
• v.13 no.1
• /
• pp.106-112
• /
• 2024

Objective: This study aimed to evaluate the validity of a depth camera-based system for monitoring physical function, assessing its feasibility for accurately monitoring activities of daily living. Design: A cross-sectional study. Methods: Twenty-three participants were enlisted to perform fifteen activities of daily living within a living laboratory designed to simulate a home environment. Activities were monitored using a depth camera system capable of classifying actions into standing, sitting, and lying down, with a conventional video camera employed for activity recording. The duration of each activity, as measured by the system, was compared to direct observations made by a physical therapist which were analyzed using a motion analysis software. The association between these two measurement approaches was assessed through correlation analysis, coefficient of determination, intraclass correlation coefficient (ICC), and Bland-Altman plots. Results: Our findings indicated that standing activities exhibited the highest correlation (r=0.847) between the system measurements and physical therapist observations, followed by sitting (r=0.817) and lying down (r=0.734), which demonstrated lower correlations. However, the ICC and Bland-Altman plots revealed notable variances between the two measurement methods, particularly for activities involving lying down. Conclusions: In this study, the depth camera-based physical monitoring system showed promise feasibility in distinguishing standing, sitting, and lying down activities at home environments. However, the current study also underlined some necessities of enhancements in capturing lying down activities.

• Wind and Structures
• /
• v.38 no.5
• /
• pp.367-379
• /
• 2024

Compared with traditional transmission towers, T-shaped angle towers have long cross-arms and are specially used for ultrahigh-voltage direct-current (UHVDC) transmission. Nevertheless, the wind loads of T-shaped towers have not received much attention in previous studies. Consequently, a series of wind tunnel tests on the T-shaped towers featuring cross-arms of varying lengths were conducted using the high-frequency force balance (HFFB) technique. The test results reveal that the T-shaped tower's drag coefficients nearly remain constant at different testing velocities, demonstrating that Reynolds number effects are negligible in the test range of 1.26 × 10⁴-2.30 × 10⁴. The maximum values of the longitudinal base shear and torsion of the T-shaped tower are reached at 15° and 25° of wind incidence, respectively. In the yaw angle, the crosswind coefficients of the tower body are quite small, whereas those of the cross-arms are significant, and as a result, the assumption in some load codes (such as ASCE 74-2020, IEC 60826-2017 and EN 50341-1:2012) that the resultant force direction is the same as the wind direction may be inappropriate for the cross-arm situation. The fitting formulas for the wind load-distribution factors of the tower body and cross-arms are developed, respectively, which would greatly facilitate the determination of the wind loads on T-shaped angle towers.

• Korean Journal of Ecology and Environment
• /
• v.57 no.2
• /
• pp.111-122
• /
• 2024

Zooplankton biomass is essential for understanding the quantitative structure of lake food webs and for the functional assessment of biotic interactions. In this study, we aimed to propose a biomass (dry weight) estimation method using the body length of cyclopoid copepods. These copepods play an important role as omnivores in lake zooplankton communities and contribute significantly to biomass. We validated several previously proposed estimation equations against direct measurements and compared the suitability of prosomal length versus total length of copepods to suggest a more appropriate estimation equation. After comparing the regression analysis results of various candidate equations with the actual values measured on a microbalance-using the coefficient of variation, mean absolute error, and coefficient of determination-it was determined that the Total Length-DW exponential regression equation [W=0.7775×e^2.0183L; W (㎍), L (mm)] could be used to calculate biomass with higher accuracy. However, considering practical issues such as the morphological similarity between species and genera of copepods and the limitations of classifying copepodid stages, we derived a general regression equation for the pooled copepod community rather than a species-specific regression equation.

• International Journal of Highway Engineering
• /
• v.4 no.1 s.11
• /
• pp.149-159
• /
• 2002

This study was performed to estimate the high-speed direct tensile strength(DTS1), low-speed direct tensile strength(DTS2) , indirect tensile strength(ITS) resilient modulus(MR) and stiffness index(SI) of sand asphalt mixture based on the absolute viscosity, kinematic viscosity, penetration, softening point and PG grade of binder. DTS2 showed higher correlation with the physical properties than other properties of mixture, and the next was DTS1, ITS, SI and MR in order. Among binder properties, PG grade showed the highest relation with DTS2. Therefore. it was found that the high DTS mixture could be made when the binder with a high PG grade was used. However, since the individual physical property showed a relatively low correlation, various properties were used together in regression analysis. The estimation models of DTS and ITS were over 0.99, respectively. R2 of MR and SI estimation models were over 0.91 and 0.93, respectively. It was concluded that mechanical properties could be estimated with a high coefficient of determination from those physical properties.

• Journal of Korean Society on Water Environment
• /
• v.28 no.6
• /
• pp.923-932
• /
• 2012

The purpose of this study was to determine parameters of surface cover materials and evaluation the effects on runoff and sediment reductions with rice straw mat with PAM at watershed scale using the SWAT model. In this study, 1) regression equation of CN for rice straw mat + PAM using SCS curve number method was developed, 2) the USLE P factor, being able to reflect simulation of rice straw mat + PAM in the agricultural field, was estimated for various slope scenarios with VFSMOD-w. Then regression equation for CN and USLE P factor were used as input data in the SWAT model. Assuming rice straw mat + PAM is applied to radish and potato fields, occupying 24% of agricultural fields at the study watershed. Result of direct runoff without rice straw mat + PAM was $65,964,368\;m^3,$ with rice straw mat + PAM, direct runoff was $65,637,336\;m^3$, $327,031.8\;m^3$ reductions compared without it. Also, result of sediment without rice straw mat + PAM was 163,531 ton, with rice straw mat + PAM, sediment was 84,779 ton, 78,752 ton reduction compared without it. This analysis showed that about 48% sediment reductions would be expected with rice straw mat + PAM. As shown in this study, rice straw mat + PAM would be used as an efficient site-specific BMPs to reduce runoff and sediment discharge from field.

• Journal of fish pathology
• /
• v.11 no.1
• /
• pp.77-81
• /
• 1998

By standardized method, Bacillus subtilis BGA, Bacillus cereus var. mycoides ATCC 11778, and Micrococcus luteus ATCC 9341 were seeded on the muller hinton agar (Difco) plate, and pH was adjusted to 6.0, 7.2, and 8.0. Five agar plates, B. subtilis (pH 6.0), B. cereus (pH 6.0), B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0), were employed as test plates of modified EEC 4-plate method. Oxytetracycline (OTC) with a diet was orally administered to flounder, Paralichthys olivaceus, at 100 mg/kg once a day. After oral administration, modified EEC 4-plate method by the three screening test using muscle-direct, extraction-disk and direct-disk methods was conducted for 3 fish at 1, 3, 5, 10, 15, 20, 25 and 30 days. Muscle-direct treatment of B. subtilis (pH 6.0) was found to be dubious positive (${\pm}$) at the 1st day after the administration; thereafter, it was found to be negative to the last day of the experiment. Extraction-disk and direct-disk treatment of B. subtilis (pH 6.0) were found to be negative from the 1st day to the last day after the administration. B. subtilis (pH 7.2), B. subtilis (pH 8.0), and M. luteus (pH 8.0) by the three screening tests, were found to be negative all the way after the administration. On the other hand, B. cereus (pH 6.0) by the three screening tests was clearly found to be positive for the first 15 days after the administration, and then muscle-direct and direct-disk treatment of B. cereus (pH 6.0) were found to be dubious positive at 20th days after the administration. However extraction-disk treatment of B. cereus (pH 6.0) was clearly found to be negative at the same stage; thereafter, the three screening tests of B. cereus (pH 6.0) were found negative to the last of the experiment. These findings showed that to have equal sensitivity to those determination for the residual detection of OTC, and also confirmed that B. cereus was effective test organism for the monitoring of OTC.

• Journal of Life Science
• /
• v.17 no.4 s.84
• /
• pp.510-514
• /
• 2007

This study was carried on cool and RT(room temperature) storage of unhulled rice. In RT storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and breakdown, setback and protein content. high significant negative coefficients were showed setback and breakdown, breakdown and protein content. In cool storage of an analysis of coefficient relation, high significant positive coefficients were observed in toyo index and amylose content and gelatinization start temperature and protein content and high significant negative coefficients were showed toyo index and whiteness, toyo index and gelatinization start temperature, gelatinization start temperature and amylose content. In RT storage of a path coefficient analysis, a highest positive direct influence was observed in amylose content and a highest negative direct influence was protein content. Positive indirect influence was high revealed breakdown and protein content and negative indirect influence was gelatinization start temperature and Mg/K ratio. In cool storage of a path coefficient analysis, a highest positive direct influence was whiteness and a highest positive indirect influence was gelatinization start temperature. Positive indirect influence was high revealed gelatinization start temperature and amylose content, negative indirect influence was whiteness and gelatinization start temperature. In RT storage of Multiple regression equation of Toyo index based on physicochemical properties of unhulled rice, a highest coefficient of determination was revealed among five facters of whiteness, protein content, Mg/K ratio, amylose content and gelatinization start temperature. In cool storage of Multiple regression equation of toyo index based on physicochemical properties of unhulled rice, highest coefficient of determination was revealed among five facters of moisture content, amylose content, gelatinization start temperature, breakdown and setback.

• Applied Biological Chemistry
• /
• v.40 no.6
• /
• pp.536-540
• /
• 1997

Volatile terpenoids of carrots were measured by the direct headspace sampling method(DHS) with gas chromatography as a study for the breeding of high quality carrots. Using this method, 7 terpenoids such as ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, ${\alpha}-terpinene$, limonene, ${\gamma}-terpinene$, and terpinolene were clearly separated. However ${\alpha}-phellandrene$ was not clearly separated from ${\beta}-myrcene$. In addition to this, higher boiling point compounds such as terpinen-4-ol, bornyl acetate, and ${\alpha}-bisbolol$ were not found. The coefficients of $determination(r^2)$ for the 7 terpenoids were higher than 0.99 and the standard curves were highly significant. Four replicated samples using this method demonstrated great reproducibility; the coefficidnt of variation (C.V.) for ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, limonene, ${\gamma}-terpinene$, terpinolene, and total terpenoids were 6.8, 6.8, 8.4, 7.1, 3.8, 10.1, 7.1%. Sixty five carrot cultivars breeded worldwide were evaluated for the 7 terpenoids and total terpenoids; the range for ${\alpha}-pinene$, ${\beta}-pinene$, ${\beta}-myrcene$, ${\alpha}-terpinene$, limonene, ${\gamma}-terpinene$, terpinolene, and total terpenoids were $0.28{\sim}2.48\;ppm$, $0.35{\sim}1.87\;ppm$, $0.56{\sim}1.51\;ppm$, 0 ppm, $0.59{\sim}1.84\;ppm$, $0.87{\sim}3.33\;ppm$, $5.15{\sim}35.81\;ppm$, and $9.07{\sim}42.30\;ppm$, respectively. Big differences in each terpenoid and total terpenoids were found among cultivars. On the total terpenoids of the 65 cultivars, 5 cultivars(7.7%) contained less than 10 ppm, 15 cultivars (23.1%) $10{\sim}11.99\;ppm$, 14 cultivars(21.5%) $12{\sim}13.99\;ppm$, 9 cultivars(13.8%) $14{\sim}15.99\;ppm$, 10 cultivars(15.4%) $16{\sim}17.99\;ppm$, 4 cultivars(6.2%) $18{\sim}19.99\;ppm$, 5 cultivars(7.7%) $20{\sim}29.99\;ppm$, and 3 cultivars(4.6%) were higher than 30 ppm. Generally, cultivars developed in Japan contained less total terpenoids than cultivars developed in Europe and America.

• Journal of Food Hygiene and Safety
• /
• v.4 no.3
• /
• pp.171-176
• /
• 1989

A rapid, simple method of ELISA was applied for the determination of aflatoxin BI in cereals from Y oungnam districts. Antibodies obtained cross reacted with aflatoxin B2 and to a less extent with other aflatoxin BI analogs. Response range for a typical standard curve was between I and 100 ppb. Fewer interference by spiked methanol-PBSdimethylformamide extracts ofrice was evidenced. Contents of aflatoxin BI from rice (65) and barley (116) were determined by competitive direct enzyme- linked immunosorbent assay as follows. Three out of 65 rices samples were positive. Rice samples of R-IS, R-30, and R-59 represent the aflatoxin B1 levels of $7.5\;\mu\textrm{g}.kg,\;6.0\;\mu\textrm{g}/kg,\;3.5\;\mu\textrm{g}/kg,\;3.3\;\mu\textrm{g}/kg$, respectively, and showed 4.6% aflatoxin BI contamination in rice samples. Meanwhile, four out of 116 barley samples were positive. VB-37 showed the highest aflatoxin Bllevels of $9.6\;\mu\textrm{g}/kg$ and VB-35, VB-15 and VB-54 represent $7.5\;\mu\textrm{g}.kg,\;6.0\;\mu\textrm{g}/kg\;and\;3.6\;\mu\textrm{g}/kg$, respectively, and showed 3.4% aflatoxin B1 contamination in barley samples.