• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.336-338
• /
• 2000

Recently many studies have been performed for variable speed control of induction motor. Direct Torque Control(DTC) is emerging technique for variable speed control of PWM inverter driven induction motor. DTC allows the direct control of stator flux and instantaneous torque through simple algorithm. In this paper ASIC design technique using VHDL is applied to DTC based speed control of induction motor. ASIC for DTC based speed control is designed through the description of coordinate transformation, speed controller stator flux and torque estimator, stator flux and torque controller, stator flux position detector. FSM(Finite State Machine) and inverter voltage switching vector. Finally the above system has been implemented on the FPGA (XC4052XL-PG411). Simulation and experiment has been performed to verify the performance of the designed ASTC.

• Journal of Pharmaceutical Investigation
• /
• 제10권1호
• /
• pp.24-33
• /
• 1980

Drug product design of phenylbutazone tablets by direct compressing was investigated. Weight variation, hardness, friability, disintegration time, apparent volume and dissolution rate for experimental tablets of nine formulations which were considered to be the effect of the additive concentration were measured. It was found out that direct compressing by the formulation No. 5 was the most suitable condition (phenylbutazone 16.7%, lactose 25%, calcium phosphate dibasic 15%, $Avicel^{\circledR}$ 41.83% and magnesium stearate 1.5%). The coefficient of correlation between disintegration time and dissolution rate, r, was = -0.97 (P<0.01).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.515-516
• /
• 2007

A novel design of contious-time filter for direct conversion receiver applications is proposed. The filter supports different modes including GSM, WCDMA. A 5th chebyshev filter is realized in a gm-C filter topology. The filter circuit is implemented in a standard CMOS $0.35{\mu}m$ processing parameter with a supply voltage of 2.5V. The HSPICE results show that the filter has 200KHz and 5MHz cutoff frequency, and each 3.4us and 85.44us gm value.

• 대한기계학회논문집A
• /
• 제26권4호
• /
• pp.754-763
• /
• 2002

Direct drive servovalve(DDV) is a kind of one-stage valve since the rotary motion of DC motor is directly transferred to the linear motion of valve spool through the link. Since the structure of DDV is simple, it is less expensive, more reliable and offers reduced internal leakage and reduced sensitivity to fluid contamination. However, the flow force effect on the spool motion is significant such that it induces large steady-state error in a step response. If the proportional control gain is increased to reduce the steady-state error, the system becomes unstable. In order to satisfy the system design requirements, the classical controller is designed using the analytical Bode method.

• 드라이브 ㆍ 컨트롤
• /
• 제16권2호
• /
• pp.1-7
• /
• 2019

Jaw crusher is a device that breaks rock collected from mines or quarries to produce aggregates of the size desired by user. A representative method for measuring load is to measure them by attaching force sensors directly to the part where the load is generated. However, the direct method has many limitations such as high-impact loads generation in equipment or space constraints, sensor capacities and costs. Therefore, Transfer Path Analysis (TPA) was used to indirectly measure impact loads by attaching acceleration sensors. In this study, both direct and TPA methods were used to measure the impact load of Jaw crusher. This study finally quantifies the impact of the load generated by the Jaw crusher using direct method and TPA method, and comparing the impact load measured calculated the derive the error rate.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.106-110
• /
• 2017

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• 한국기계가공학회지
• /
• 제21권7호
• /
• pp.1-9
• /
• 2022

Peeling and dimensional deformation that occur during a manufacturing process are accompanied by an increase in the manufacturing cost and production time caused by manufacturing defects. In order to solve this problem, it is essential to predict risk factors at the design stage through computational analysis of the additive manufacturing process and to control shape distortion due to residual stress. In this study, the dimensional characteristics were improved by applying the distortion compensation design through computational analysis to minimize the distortion occurring in the DMLS(Direct Metal Laser Sintering) method of the metal additive manufacturing process.

• 한국통신학회논문지
• /
• 제28권6A호
• /
• pp.425-432
• /
• 2003

본 논문에서는 직접변환방식을 이용한 CDMA 기지국용 멀티캐리어 디지털 송신기를 설계하고 시뮬레이션을 통해 그 성능을 검증해 보았다. 먼저, 멀티캐리어 송신기를 설계하기 위해 필요한 새로운 기술들을 검토해보고, 이 새로운 기술을 적용하여 멀티캐리어 송신기를 설계하고 시뮬레이션 하였다. 설계와 시뮬레이션은 Agilent Technologies사의 RF 시뮬레이션 S/W인 ADS (Advanced Design System)을 사용하였으며, 디지털 블록과 아날로그 블록으로 나누어 설계한 후 두 블록을 co-simulation하여 결과를 분석하였다. 결과에 의하면, 직접변환방식을 이용하여 멀티캐리어 디지털 송신기를 구현한 경우 최종 아날로그출력이 시스템의 요구조건 (IS-97 & 3G TS 25.104) 인 스펙트럼 마스크 특성을 만족하였다. 이것은 제안한 멀티캐리어 디지털 송신기의 성능이 CDMA 기지국에 적용될 수 있다는 것을 의미한다. 따라서, 본 논문에서 제안한 직접변환방식을 이용한 멀티캐리어 디지털 송신기는 향후 CDMA 기지국에 적용되어 구현될 때, 가격적으로나 기술적으로 한 단계 발전된 시스템을 구현할 수 있다.

• 산경연구논집
• /
• 제9권5호
• /
• pp.17-24
• /
• 2018

Purpose - Through the analysis of the characteristics of overseas direct purchase websites and the relevant empirical analysis of the quality of service delivery, the activated theory/strategy and significance of the overseas direct purchase are sorted out. Research design, data, and methodology - In the process, to make more effective analysis, several analysis tools and analysis programmes are used, IBM SPSS Statistics 23.0 and IBM SPSS AMOS 23.0. Results - Among the characteristics of the overseas direct purchase website, the security, convenience and information provided by the overseas direct purchase have already had a positive impact on the satisfaction. The quality of the delivery service is composed of four factors: rapidity, reliability, intimacy and correctness. The research results indicate that the satisfaction level has a positive impact on the re-purchase intention. Conclusions - The significance of this study has the characteristics of overseas direct purchase sites which have confirmed that security convenience and intelligence availability have a positive impact on satisfaction and re-purchase intent. It is important to have a safe and reliable access to shopping sites on overseas direct purchase sites. In the characteristics of overseas direct purchase sites, the interaction have no positive effect on satisfaction and re-purchase intention.

• 한국재료학회지
• /
• 제29권12호
• /
• pp.818-824
• /
• 2019

In this study, the direct water quenching technique is applied to validate the applicability of direct water quenching as a cooling method in the hot stamping process of 3.2 mm thick boron steel sheet. Cooling performance of conventional die quenching and direct water quenching is compared. Higher cooling rate is obtained by hot stamping with direct water quenching compared to die quenching. As the flow rate of cooling water increases, the cooling rate increases, and a high cooling rate of 71 ℃/s is achieved under flow rate conditions of 0.8 L/min. Through direct water quenching, the cooling time required for sufficient cooling of the sheet is reduced. Full martensitic microstructure is obtained under flow rate condition of 0.8 L/min. Hardness increases with increasing flow rate. From these results, it is verified that the direct water quenching is applicable to the hot stamping of thick boron steel sheet.