• Journal of the Korean Geosynthetics Society
• /
• v.8 no.1
• /
• pp.33-40
• /
• 2009

The laboratory tests and field plate load test were carried out to evaluate the reinforcement effect of geocell for road construction. The geocell-reinforced subgrade shows the increment of cohesion and friction angle with comparison of non-reinforced subgrade. In addition, the field plate load test was performed on the geocell-reinforced subgrade to estimate the bearing capacity of soil. The direct shear test was conducted with utilizing a large-scale shear box to evaluate the internal soil friction angle with geocell reinforcement. The number of cells in the geocell system is varied to investigate the effect of soil reinforcement. The theoretical bearing capacity of subgrade soil with and without geocell reinforcement was estimated by using the soil internal friction angle. The field plate load tests were also conducted to estimate the bearing capacity with geocell reinforcement. It is found out that the bearing capacity of geocell-reinforced subgrade gives 2 times higher value than that of unreinforced subgrade soil. The settlement and the distribution of deformation were also estimated by using the finite element method. The magnitude of settlements on the geocell-reinforced subgrade and unreinforced subgrade are 6.8cm and 1.2cm, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.323-330
• /
• 2004

The purpose of this study was to evaluate the diagnostic validity of early proximal caries lesions using laser fluorescence and whether the detection could be enhanced using a fluorescent dye. Direct visual examination and bitewing radiograph were used for comparison. The subjects of this study were 30 children of $3{\sim}9$ years old. Laser fluorescence and dye-enhanced laser fluorescence(mixed wavelength of 488 and 514 nm) were used and viewed through glasses(excluding wavelength<520 nm). For dye-enhanced laser fluorescence a 0.075% sodium fluorescein dye was applied before examination. Proximal caries lesion of each subject was assessed using visual examination, bitewing radiograph, laser fluorescence, and dye-enhanced laser fluorescence. The results in the three detection methods were compared to the assessment of bitewing radiograph. The results from the present study can be summarized as follows: 1. There was highly correlation(r=0.725-0.911) between the bitewing radiograph and all three detection methods(p<0.05) 2. The reproducibility(kappa value) of the visual examination, laser fluorescence and dye-enhanced laser fluorescence comparing with bitewing radiograph of proximal caries was 0.451, 0.683, 0.772, respectively. There was highest correlation between dye-enhanced laser fluorescence and bitewing radiograph for detection of proximal caries. The results from this study indicated that the dye-enhanced laser fluorescence considered to be accurate and reliable method in detecting proximal caries.

• Journal of Radiation Protection and Research
• /
• v.42 no.2
• /
• pp.83-90
• /
• 2017

Background: Different cases exist in the measurement of thyroid radiobioassays owing to the individual characteristics of the subjects, especially the potential variation in the counting efficiency. An In situ Object Counting System (ISOCS) was developed to perform an efficiency calibration based on the Monte Carlo calculation, as an alternative to conventional calibration methods. The purpose of this study is to evaluate the applicability of ISOCS to thyroid radiobioassays by comparison with a conventional thyroid monitoring system. Materials and Methods: The efficiency calibration of a portable high-purity germanium (HPGe) detector was performed using ISOCS software. In contrast, the conventional efficiency calibration, which needed a radioactive material, was applied to a scintillator-based thyroid monitor. Four radioiodine samples that contained $^{125}I$ and $^{131}I$ in both aqueous solution and gel forms were measured to evaluate radioactivity in the thyroid. ANSI/HPS N13.30 performance criteria, which included the relative bias, relative precision, and root-mean-squared error, were applied to evaluate the performance of the measurement system. Results and Discussion: The portable HPGe detector could measure both radioiodines with ISOCS but the thyroid monitor could not measure $^{125}I$ because of the limited energy resolution of the NaI(Tl) scintillator. The $^{131}I$ results from both detectors agreed to within 5% with the certified results. Moreover, the $^{125}I$ results from the portable HPGe detector agreed to within 10% with the certified results. All measurement results complied with the ANSI/HPS N13.30 performance criteria. Conclusion: The results of the intercomparison program indicated the feasibility of applying ISOCS software to direct thyroid radiobioassays. The portable HPGe detector with ISOCS software can provide the convenience of efficiency calibration and higher energy resolution for identifying photopeaks, compared with a conventional thyroid monitor with a NaI(Tl) scintillator. The application of ISOCS software in a radiation emergency can improve the response in terms of internal contamination monitoring.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.2
• /
• pp.47-57
• /
• 2007

Real-time oceanographic information system was developed using platforms of aquaculture farms to examine causes of mass mortality of hatchery fishes, and to reduce the damage of mass mortality which has been occurred frequently off coast by abnormal change of ocean conditions. The system had the advantages of direct data distribution to fishermen at the farm and instant maintenance of equipments due to easy access to the farms and residents at the farms in comparison with offshore mooring buoy system. To avoid discontinued measurement of the system, repairs caused by malfunction of equipments, bimonthly preventive maintenances and daily monitoring of measured data were systematized. Confidence intervals calculated by a statistical method using accumulated data were applied to data management. Such activities could minimize discontinuance of measurement and keep information more trustful. In addition, the system has various ways of data distribution. Through homepage and e-mail in the internet, information was provided to public. Display units which were connected to equipments at the farm gave the measured data directly to fishermen, which guided them to run their farm scientifically. Finally large display unit was installed at a fish market and showed the measured data at the nearest station with tide and weather information. Proper region for aquaculture and wintering region were studied using temperature data obtained by the system in 2006. The system will contribute to reduce economic damage of coastal fishery and to understand coastal marine environment.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.249-257
• /
• 2007

The periodic square wave (PSW) model was successfully applied to the optimal design of a batch-storage network. The network structure can cover any type of batch production, distribution and inventory system, including recycle streams. Here we extend the coverage of the PSW model to multitasking semi-continuous processes as well as pure continuous and batch processes. In previous solutions obtained using the PSW model, the feedstock composition and product yield were treated as known constants. This constraint is relaxed in the present work, which treats the feedstock composition and product yield as free variables to be optimized. This modification makes it possible to deal with the pooling problem commonly encountered in oil refinery processes. Despite the greater complexity that arises when the feedstock composition and product yield are free variables, the PSW model still gives analytic lot sizing equations. The ability of the proposed method to determine the optimal plant design is demonstrated through the example of a high density polyethylene (HDPE) plant. Based on the analytical optimality results, we propose a practical process optimality measure that can be used for any kind of process. This measure facilitates direct comparison of the performance of multiple processes, and hence is a useful tool for diagnosing the status of process systems. The result that the cost of a process is proportional to the square root of average flow rate is similar to the well-known six-tenths factor rule in plant design.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.18-31
• /
• 1989

To analyze the impact of air pollution control on electricity generation cost, a computer program was developed. POGEN calculates levelized discounted power generation cost including additional air pollution control cost for coal power plant. Pollution subprogram calculates total capital and variable costs using governing equations for flue gas control. The costs are used as additional input for levelized discounted power generation cost subprogram. Pollution output for Rue Gas Desulphurization direct cost was verified using published cost data of well experienced industrialized countries. The power generation costs for the year 2001 were estimated by POGEN for three different regulatory scenarios imposed on coal power plant, and by levelized discounted power generation cost subprogram for nuclear power. Because of uncertainty expected in input variables for future plants, sensitivity and uncertainty analysis were made to check the importance and uncertainty propagation of the input variables using Latin Hypercube Sampling and Multiple Least Square method. Most sensitive parameter for levelized discounted power generation cost is discount rate for both nuclear and coal. The control cost for flue gas alone reaches additional 9-11 mills/kWh with standard deviation less than 1.3 mills/kWh. This cost will be nearly 20% of power generation cost and 40% of one GW capacity coal power plant investment cost. With 90% confidence, the generation cost of nuclear power plant will be 32.6-51.9 mills/kWh, and for the coal power plant it will be 45.5-50.5 mills/kWh. Nuclear is favorable with 95% confidence under stringent future regulatory requirement in Korea.

• Korean Journal of Medicinal Crop Science
• /
• v.27 no.3
• /
• pp.202-207
• /
• 2019

Background: Rehmannia glutinosa is a perennial herb belonging to the family Scrophulariaceae and is used in traditional oriental medicine. This study was conducted to evaluate the appropriateness of plug-seedling cultivation for replanting of R. glutinosa. Methods and Results: The seed rhizomes of Rehmannia glutinosa 'Jihwang 1' were harvested in the middle of March, 2018. Direct seedling cultivation was conducted after air curing for 3 days. The seedlings for transplanting were cultivated for 30 (30D), 45 (45D), and 60 days (60D). The mat formation rates of the 30D, 45D and 60D treatment seedling were 81.3%, 100%, and 100%, respectively. Of the tree treatment groups, flowering occurred only in the 45D and 60D treatment groups, and their flowering rates were $7.3{\pm}3.06%$ and $13.3{\pm}1.15%$, respectively. The agronomic characteristics and active components of the three treatment groups were evaluated in comparison with the DS1 (directly seeded group, control) and DS2 (directly seeded group, replanting) groups. As a result, the leaf length and leaf width of the 30D seedlings were higher than other treatment groups, but the number of leaves per plant was statistically the same. In addition, root diameter and yield of the 30D seedling were statistically the same as DS1. Moreover the catalpol contents of 30D, 45D, DS1 and DS2 group seedlings were 2.23%, 1.86%, 2.50% and 2.08%, respectively. Conclusions: Taken together, these findings suggest it is feasible to use the plug-seedling cultivation method for replanting of R. glutinosa. seedlings. However, further evaluation of the economic aspect is needed.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.5-38
• /
• 2006

Although in Korea there are only three examples of wooden coffins being found in burial mounds - from the Daho-ri, Songhyun-dong, and Munyung tombs, in Japan data on the shape and structure of wooden coffins from the Gofun era is relatively abundant. The wooden coffins of the Gofun era of Japan can be classified into either the dugout log style or the combined boards style according to their method of manufacture. They can also be divided by shape, into such categories as the boat shape, the split bamboo shape, the box shape, and so on. The box shape category can be further divided into the assembled type and the nailed type, according to how the boards are put together. Japanese Umbrella Pine (Sciadopitys verticillata) was favored as coffin-wood in all ages, but during the later Gofun era easily obtained woods such as the Japanese cedar (Cryptomeria japonica) or the Hinoki Falsecypress (Chamaecyparis obtusa) were also used. The coffins found at Daho-ri and Songhyun-dong are similar to the Japanese dugout log style in shape and manufacture, while the king's and queen's coffins excavated at Munyung Tomb are seen to have had direct influence on the appearance of nailed coffins Japan. The coffin in Songhyun-dong 7th mound was originally a dugout log boat. It was probably used for practical reasons such as the bugproof, anti-corrosion qualities of camphor wood, not because of ideological reasons such as in a boat burial (in which the boat takes the deceased to the after world). Because the Changnyong region is inland, where camphor trees do not grow, using an already existing boat may have been the only way to procure a camphor-wood coffin. From historical circumstances, it may be inferred that the camphor trees were imported into Korea from Japan, between which there was much cultural exchange.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.413-416
• /
• 2019

Alstroemeria (Alstroemeriaceae) is one of the most important cut flowers in international market. Especially, characteristics like long vase-life, various colors, tolerance to low temperature and a low energy requirement during cultivation have stimulated this success. Because of its characteristics such as low multiplication rates, time-consuming process and high risk of carrying viral disease, in vitro propagation techniques based on rhizome meristems culture have been developing nowadays. The callus induction has various cultivation sites compared with the direct plant generation method, and if the callus is maintained well, the plant differentiation can be performed simultaneously while maintaining the callus, so that it can be used for mass proliferation. In this study, we tested various hormones and cultivars for efficient callus induction. As a result of culturing between the nodes and the internodes, the callus began to be formed after 8 weeks, and the calli incidence in the nodes was higher than that between the internodes. Also, in the comparison of 2,4-D and picloram, the callus incidence rate was up to 2 times higher in the medium treated with 2,4-D. Using these results, it is thought that it will help establish the system of mass propagation system of Alstroemeria and cultivate new varieties.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.7
• /
• pp.913-921
• /
• 2019

Objective: The objectives of this study were to compare identified informative regions through two genome-wide association study (GWAS) approaches and determine the accuracy and bias of the direct genomic value (DGV) for milk production traits in Korean Holstein cattle, using two genomic prediction approaches: single-step genomic best linear unbiased prediction (ss-GBLUP) and Bayesian Bayes-B. Methods: Records on production traits such as adjusted 305-day milk (MY305), fat (FY305), and protein (PY305) yields were collected from 265,271 first parity cows. After quality control, 50,765 single-nucleotide polymorphic genotypes were available for analysis. In GWAS for ss-GBLUP (ssGWAS) and Bayes-B (BayesGWAS), the proportion of genetic variance for each 1-Mb genomic window was calculated and used to identify informative genomic regions. Accuracy of the DGV was estimated by a five-fold cross-validation with random clustering. As a measure of accuracy for DGV, we also assessed the correlation between DGV and deregressed-estimated breeding value (DEBV). The bias of DGV for each method was obtained by determining regression coefficients. Results: A total of nine and five significant windows (1 Mb) were identified for MY305 using ssGWAS and BayesGWAS, respectively. Using ssGWAS and BayesGWAS, we also detected multiple significant regions for FY305 (12 and 7) and PY305 (14 and 2), respectively. Both single-step DGV and Bayes DGV also showed somewhat moderate accuracy ranges for MY305 (0.32 to 0.34), FY305 (0.37 to 0.39), and PY305 (0.35 to 0.36) traits, respectively. The mean biases of DGVs determined using the single-step and Bayesian methods were $1.50{\pm}0.21$ and $1.18{\pm}0.26$ for MY305, $1.75{\pm}0.33$ and $1.14{\pm}0.20$ for FY305, and $1.59{\pm}0.20$ and $1.14{\pm}0.15$ for PY305, respectively. Conclusion: From the bias perspective, we believe that genomic selection based on the application of Bayesian approaches would be more suitable than application of ss-GBLUP in Korean Holstein populations.