• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.93-96
• /
• 2005

High temperature furnace such as Steam power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agents are necessary to use De-NOx system. In this study mixing caused by direct injection of reducing agent solution spray into flue gas duct was measured. Carbonated water was used as tracer and simulated agent because ammonia as a reducing agent is not proper to experiment. Mixing and evaporation must occur simultaneously and quickly enough to achieve desirable efficiency. To achieve that, the angle of attack of static mixer and the location is simulated and $CO_2$ concentration is measured.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.71-77
• /
• 1998

In this study we calculated the flowfields around the axisymmetric bodies in the rarefied gas regime by using the DSMC. A flat-ended cylinder was selected as a representative axisymmetric body and the gas used for all calculations was nitrogen. With zero angle of attack, an increasingly rapid rise in density and the effect of shock waves near the flat-ended face were examined. And on the cylinder surface velocity slips and boundary layers could be observed in the results. Larsen-Borgnakke model was used for the energy redistribution in inelastic collisions. And by considering all internal energy modes, the distributions of translational, rotational and vibrational temperatures were plotted. The calculations were peformed for various Knudsen numbers, Especially the rotational temperatures calculated for a case were compared with the experimental results. And the simulation results show good agreements with the experimental ones.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1582-1589
• /
• 1994

The characteristics Prandt1-Meyer expansion of supersonic flow with condensation through a wavy wall in a channel are investigated by experiment and numerical direct marching method of characteristics. In the present study, for the case of moist air flow in the type of indraft supersonic wind tunnel, the dependency of location of formation and reflection of the oblique shock wave generated by the wavy wall and the distribution of flow properties, on the specific humidity and temperature at the entrance of wavy wall and the attack angle of the wavy wall to the main stream is clarified by schlieren photograph, distribution of static pressure and Mach number, and plots of numerical results. Also, we confirm that the wavy wall plays an important key role in the formation of oblique shock wave, and that the effect of condensation on the flow field appears apparently.

• Coupled systems mechanics
• /
• v.7 no.4
• /
• pp.421-440
• /
• 2018

In this study, a computational method for wall shear stress combined with an implicit direct-forcing immersed boundary method is presented. Near the immersed boundaries, the sub-grid stress is determined by a wall model in which the wall shear stress is directly calculated from the Lagrangian force on the immersed boundary. A coupling mathematical model of the transition process for a model Francis turbine comprising turbulent flow and rotating rigid guide vanes is established. The spatiotemporal distributions of pressure, velocity, vorticity and turbulent quantity are gained with the transient process; the drag and lift coefficients as well as other forces (moments) are also obtained as functions of the attack angle. At the same time, analysis is conducted of the characteristics of pressure pulsation, velocity stripes and vortex structure at some key parts of flowing passage. The coupling relations among the turbulent flow, the dynamical force (moment) response of blade and the rotating of guide vane are also obtained.

• Advances in aircraft and spacecraft science
• /
• v.2 no.4
• /
• pp.367-389
• /
• 2015

Simple solutions are obtained for the fuel required by internal combustion engine airplanes on trajectories with a constant rate of climb or descent. Three modes of flight are considered: constant speed, constant Mach number and constant angle of attack. Starting from the exact solutions of the equations of motion for the modes of motion considered, approximate solutions are obtained that are much easier to compute while still being quite precise. Simpler formulas are derived for the weight of fuel, speed, altitude, horizontal distance, time to climb, and power required. These formulas represent a new important contribution since they are fundamental for the analysis of aircraft dynamics and thus have direct applications for the analysis of aircraft performances and mission planning.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2001.11a
• /
• pp.57-61
• /
• 2001

In a main propulsion system of naval ship, DRME(Double Resilient Mounted Engine) is mostly adopted to ensure vibration isolation and shock resistance against underwater explosion weapon attack. In this paper, an analysis program for vibration and shock evaluation of DRME is presented. DRME is modelled as multi-rigid bodies with nonlinear mounts, and direct time integration method is introduced for shock analysis. The computed results are compared with those of foreign ones. Navy's proposed specifications are well satisfied with this program. This analysis program serves for the development of domestic DRME technology of naval ship.

• Journal of Welding and Joining
• /
• v.29 no.5
• /
• pp.58-62
• /
• 2011

Stainless steels are alloy steels with a nominal chromium content of at least 11 percent, with other alloy additions. The stainlessness and corrosion resistance of these alloy steels are attributed to the presence of a passive oxide film on the surface. When exposed to conditions like Resistance Spot Welding (RSW) process that remove the passive oxide film, stainless steels are subject to corrosive attack. And exposure to elevated temperatures causes oxidation (discoloration) of areas around indentation in Spot welding. In this paper, deal with the effect of shielding gas (Ar) preventing the corrosion, oxidation of stainless steel. And find the optimal shielding gas flow rate. In addition, suggest effective purging method for direct/indirect spot welding process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.05b
• /
• pp.261-264
• /
• 2005

For concrete structures immersed in seawater, the concentration of chloride used to estimate the chloride diffusion coefficient can be defined as the seawater chloride concentration. However, for seashore concrete structures which are not coming into direct contact with seawater, establishing the interface concentration of chloride becomes delicate. In addition, concrete structures are greatly affected by salt attack primarily due to airborne sea salt like it can be seen through the corrosion of rebar. This study intends to investigate characteristics on the salinity of airborne sea salt by height. Salinity measurement devices were installed at height of 2, 10 and 19m on the seashore water tower located in the area of Samchuk in the Eastern coast. Analysis results of the decrease of salinity with respect to the height above the ground at a distance of 30m from the seashore showed that the reduction reached about 40$\%$ at a height of 10m and 60$\%$ at 20m.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.609-613
• /
• 1995

The reaction of chloro(methylthio and arylthio)methanephosphonate (1) and Pummerer-type reaction of sulfinylmethanephosphonate (2) with nucleophiles such as aromatic compounds and thiols were examined. The direct chlorination of (methylthio and arylthio)methanephosphonate with N-chlorosuccinimide (NCS) led to the formation of monochlorinated phosphonates (1) in good yield. The reaction of 1 with aromatic compounds and thiols in the presence of stannic chloride afforded a variety of aryl(methylthio)methanephosphonates (3) and thioacetals of formylphosphonates (4), respectively. Phosphonates 3 and 4 were also obtained from the reaction of Pummerer intermediate, generated from sulfinylmethanephosphonate (2), with aromatic compounds and thiols, respectively. A versatile reaction conditions to generate Pummerer intermediate were examined. The best condition was the combination of trifluoroacetic anhydride with stannic chloride. All reactions may involve an initial formation of α-phosphoryl thiocarbocation and a subsequent nucleophilic attack of aromatic compounds and thiols.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.10-14
• /
• 2019

The number of security incidents is increasing as the Internet of Things(IoT) is distributed widely. The security incidents of IoT can cause financial damages. Moreover, It can become direct threats to humans. In order to prevent these problems, the security installation for IoT devices is important. This paper describes the definition of IoT devices, security incident case, architecture, and the security threats that can occur when a device is connected to network without security installation.