• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.303-306
• /
• 2010

Personal information being leaked, and personal assets that through a malicious web site for hackers to exploit. Other confidential information via the web site of the country, and your personal information by illegally accessing the data has been obtained who Hacker forces are operating in some countries. Due to the problem of web site management has many vulnerabilities that web sites, as well as programs. In this paper, in the trend world, as well as domestic XSS, SQL Injection, Web Shell analysis of the vulnerability to attacks and XSS, SQL Injection, Web Shell is a direct attack to attack. Security measures are presented what after the attack demonstrated the hack to data collection, analysis. In this study, web site management, web site security and safety can be improved and research will contribute.

• Advances in aircraft and spacecraft science
• /
• v.2 no.1
• /
• pp.45-56
• /
• 2015

The attitude aerodynamic control is an important subject in the design of an aerospace plane. Usually, at high altitudes, this control is fulfilled by thrusters so that the implementation of an aerodynamic control of the vehicle has the advantage of reducing the amount of thrusters fuel to be loaded on board. In the present paper, the efficiency of a wing-flap has been evaluated considering a NACA 0010 airfoil with a trailing edge flap of length equal to 35% of the chord. Computational tests have been carried out in hypersonic, rarefied flow by a direct simulation Monte Carlo code at the altitudes of 65 and 85 km, in the range of angle of attack 0-40 deg. and with flap deflection equal to 0, 15 and 30 deg.. Effects of the flap deflection have been quantified by the variations of the aerodynamic force and of the longitudinal moment. The shock wave-boundary layer interaction and the shock wave-shock wave interaction have been also considered. A possible interaction of the leading edge shock wave and of the shock wave arising from the vertex of the convex corner, produced on the lower surface of the airfoil when the flap is deflected, generates a shock wave whose intensity is stronger than those of the two interacting shock waves. This produces a consistent increment of pressure and heat flux on the lower surface of the flap, where a thermal protection system is required.

• Journal of Korea Game Society
• /
• v.7 no.3
• /
• pp.23-30
• /
• 2007

Game balance is an very important factor for game design, it is necessary factor to make game more fun. Most of game companies have been using their own balance method for successful game development. An efficient balance method always can't guarantee successful game development but it is true for game developer to need standard balance method for efficient game development. Fighting system between characters is mainly implemented in genre including action. Direct balance factors for fighting between characters are their characteristics and attack patterns. In this paper, We identify direct balance factors for game including fighting system between characters and propose mathematical method for it.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.5
• /
• pp.97-103
• /
• 2007

A novel selective metallization process to fabricate the fine conductive line based on inkjet printing has been investigated. Recently, Inkjet printing has been widely used in flat panel display, electronic circuits, biochips and bioMEMS because direct inkjet printing is an alternative and cost-effective technology for patterning and fabricating objects directly from design without masks. The photosensitive etching resist used in this process is an organic polymer which becomes solidified when exposed to ultraviolet lights and has high viscosity at ambient temperature. A piezoelectric-driven inkjet printhead is used to dispense 20-30 ${\mu}m$ diameter droplets onto the copper substrate to prevent subsequent etching. Repeatability of circuitry fabrication is closely related to the formation of steady droplets, adhesion between etching resist and copper substrate. Therefore, the ability to form small and stable droplets and surface topography of the copper surface and chemical attack must be taken into consideration for fine and precise patterns. In this study, factors affecting the pattern formation such as adhesion strength, etching mechanism, UV curing have been investigated. As a result, microscale copper patterns with tens of urn high have been fabricated.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2501-2503
• /
• 1998

In this paper, the silicon-nitride membrane structure for IR sensor was fabricated through the etching and the direct bonding. The PTO layer as a IR detection layer was deposited on the membrane and its characteristics were measured. The attack of PTO layer during the etching of silicon wafer as well as the thermal isolation of the IR detection layer can be solved through the method of bonding/etching of silicon wafer. Because the PTO layer of c-axial orientation raised thermal polarization without polling, the more integration capability can be achieved. The surface roughness of the membrane was measured by AFM, the micro voids and the non-contacted area were inspected by IR detector, and the bonding interface was observed by SEM. The polarization characteristics and the dielectric characteristics of the PTO layer were measured, too.

• Journal of Powder Materials
• /
• v.28 no.4
• /
• pp.342-351
• /
• 2021

Because of its unique properties, tungsten is a strategic and rare metal used in various industrial applications. However, the world's annual production of tungsten is only 84000 t. Ammonium paratungstate (APT), which is used as the main intermediate in industrial tungsten production, is usually obtained from tungsten concentrates of wolframite and scheelite by hydrometallurgical treatment. Intermediates such as tungsten trioxide, tungsten blue oxide, tungstic acid, and ammonium metatungstate can be derived from APT by thermal decomposition or chemical attack. Tungsten metal powder is produced through the hydrogen reduction of high-purity tungsten oxides, and tungsten carbide powder is produced by the reaction of tungsten powder and carbon black powder at 1300-1700℃ in a hydrogen atmosphere. Tungsten scrap can be divided into hard and soft scrap based on shape (bulk or powder). It can also be divided into new scrap generated during the production of tungsten-bearing goods and old scrap collected at the end of life. Recycling technologies for tungsten can be divided into four main groups: direct, chemical, and semi-direct recycling, and melting metallurgy. In this review, the current status of tungsten smelting and recycling technologies is discussed.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.3
• /
• pp.57-64
• /
• 1996

The purpose of this study is to investigate risk factor found in the patients with stroke in physical therapy. A questionnaire survey was carried out for 130 the patients, who had comparatively alert mentality, hospitalized in kyung hee oriental medical hospital with stroke from January, 1st to May 31st, 1996. Major findings of this stuty were as follows. 1. The stroke patients 67(51.5%)were males and 63(48.5%) femals. The age groups of 50 to 69 years accounted for 67.6% of the total stroke patients are the highest. The job groups of commerce and business of patients 58.5%. The living groups of major citys of the revealed the highest incidence(40.8%). 2. There were 40 patients (30.8 %) who had hemorrhage related condions as the direct cause of their stroke, and 90 patients (69.2 %) who had cerebral infarction with no hemorrhaging as the cause. of the disease that the patients suffered from before their stroke, blood pressure related problems were most numberous 76 patients(58.5%) had such problems. 3. A month before their attack of stroke, were asked what thay thought could become the causes of their strokes. The most frequently mentioned answers were fatigue, drinking too much, and smoking, as chosen by 45 patients(34.6 %). 4. In regarding the relation between stress and stroke, (37.7%), of the surveyed belonged to the most numerous group had of people who said they were not under stress. Yet this group had a large number of parents. And 22.3 % of the surveyed named conflicts among parents, siblings, and relatives. 5. Questions were asked to find out the relationship between complications of stroke and smoking or drinking. It was surprising to see a high rate of attack among the 55.4 % majority who answered that they did not smoke nor drink. 6. To sum up the affect of food on attack of stroke, 42.5% of the people who had a sprcey and salty diet had a higher rate of attack then the group of people with leisurely nature. 7. Looking at the family history, 40.4% of the patients said their parents also suffered the disease. This percentage is the highest. And 40.0% answered that there is no one who suffered in their family history. Judging from the percentages and family.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.42 no.7
• /
• pp.616-621
• /
• 2014

Consumption of the fuel on the satellite operating in low earth orbit, is increased due to the air resistance and the amount of increase makes the satellite lifetime decrease or the satellite mass risen. Therefore the prediction of drag force of the satellite is important. In the paper, drag force and drag coefficient analysis of the parabolic antenna satellite in low earth orbit using direct simulation monte carlo method (DSMC) is conducted according to the mission altitude and angle of attack. To verify the DSMC simulated rarefied air movement, Starshine satellite drag coefficient according to the altitude and gas-surface interaction are compared with the flight data. Finally, from the analysis results, it leads to appropriate satellite drag coefficient for orbit lifetime calculation.

• Journal of Mechanical Science and Technology
• /
• v.15 no.4
• /
• pp.492-499
• /
• 2001

The characteristics of Prand시-Meyer expansion of supersonic flow with condensation along a wavy wall in a channel are investigated by means of experiments and numerical analyses. Experiments are carried out for the case of moist air flow in an intermittent indraft supersonic wind tunnel. The flow fields are visualized by a Schlieren system and the distributions of static pressure along the upper wavy wall are measured by a scanning valve system with pressure transducers. In numerical analyses, the distributions of streamlines, Mach lines, iso-pressure lines, and iso-mass fractions of liquid are obtained by the two-dimensional direct marching method of characteristics. The effects of stagnation temperature, absolute humidity, and attack angle of the upper wavy wall on the generation and the locations of generation and reflection of an oblique shock wave are clarified. Futhermore, it is confirmed that the wavy wall plays an important role in the generation of an oblique shock wave and that the effect of condensation on the flow fields is apparent.

• Journal of the Korean Applied Science and Technology
• /
• v.15 no.2
• /
• pp.49-57
• /
• 1998

This study is to develop a new synthetic method for the nitroarenes via non-electrophilic substitution. Direct nitration at the C-1 position of isoquinoline has never been reported and substitution in isoquinoline under the normal nitration condition occurs at C-5 and C-8. We have demonstrated a facile one-step sythetic method for the nitration of isoquinolines at the C-1 position, which involves the electrophilic attack of a $DMSO-Ac_2O$ complex, followed by nucleophilic addition of nitrate ion to this intermediate. Since the reaction is simple and mild, this method has preparative merit since 1-nitroisoquinolines are not readily accessible by other methods. Application to the synthesis of poly nitroarenes from the corresponding anilines was also described.