• 제목/요약/키워드: dimensionless numbers

검색결과 84건 처리시간 0.022초

Natural Convection in Shallow Cavities

  • Bae, Dae-Seok
    • International Journal of Air-Conditioning and Refrigeration
    • /
    • 제6권
    • /
    • pp.158-167
    • /
    • 1998
  • Natural convection heat transfer in a rectangular enclosure is investigated numerically for low aspect ratio(height/width) cavities. Numerical results are obtained for aspect ratios between ${10}^{-2}$ and ${10}^0$, Rayleight numbers from ${10}^3$ to ${10}^7$ and Prandtl numbers from 10$^{-2}$ to 10$^3$. Results are compared with existing analytical and experimental results. A heat transfer correlation is developed to predict the mean Nusselt number as a function of the three governing dimensionless parameters: Rayleigh number, aspect ratio and Prandtl number.

  • PDF

평탄방에서 선박의 모의실험에 관한 연구 (A Study on the Simulation of the Ship in Level Ice)

  • 박명규;고상용
    • 한국항해학회지
    • /
    • 제18권4호
    • /
    • pp.23-31
    • /
    • 1994
  • A theoretical scaling was made in order to acquire the ice resistance of ships in level ice. Ice resistance of ice-breaker Ermak was calculated by Kashteljan eequation and it's model test results were compared with full-scale measurements. Atkins's ice number and Norman Jones's dimensionless numbers were investigated and discussed.

  • PDF

4각 덕트내에서 난류 맥동유동의 난류특성에 관한 연구 (A Study on Turbulent Characteristics of Turbulent Pulsating Flows in a Square Duct)

  • 박길문;고영하
    • 설비공학논문집
    • /
    • 제2권3호
    • /
    • pp.188-198
    • /
    • 1990
  • Turbulent characteristics of turbulent pulsating flows were studied experimentally in a square duct. Velocity waveforms, velocity profiles, and turbulent intensity of turbulent pulsating flow were investigated by using a hot-wire anemometer with data acquisition and a processing system in a square duct with a ratio of 1 ($40mm{\times}40mm$) to 4,000mm long. Turbulent components were shown to be larger in decelerating than in accelerating regions and also larger for a large phase of velocity and U'rms distribution of turbulent flow. The effect of velocity amplitude ratio does not exist for specified time [${\theta}(z^{\prime})$], amplitude ratio (${\mid}U^{\prime}_{rms.os.1}{\mid}/{\mid}U_{m.os.1}{\mid}$), and phase difference (${\Delta}U^{\prime}_{rms.os.1}-{\Delta}U_{m.os.1}$) in either turbulent oscillating or cross-sectional mean velocity components. The effect of dimensionless angular frequency for specified time [${\theta}(z^{\prime})$] can be disregarded because the dimensionless angular frequency does not affect the specified time. The velocity distributions of turbulent pulsating flows for various time-averaged Reynolds numbers are in approximate agreement with the velocity distributions for equivalent Reynolds numbers and 1/7th power law of steady flow.

  • PDF

표면조도를 가지는 볼록한 면에 충돌하는 제트에 의한 열전달계수 측정 (Heat transfer coefficient measurement by a jet impinging on a rib-roughened convex surface)

  • 정영석;이대희;이준식
    • 대한기계학회논문집B
    • /
    • 제22권3호
    • /
    • pp.373-385
    • /
    • 1998
  • The local Nusselt numbers have been measured for a round turbulent jet impinging on the convex surface with and without rib. Liquid crystal/transient method was used to determine the Nusselt number distributions along the surface. The temperature on the surface was measured to within .+-.0.25 deg. C accuracy using liquid crystal and a digital color image processing system. The experiments were made for the jet Reynolds number (Re) 23,000, the dimensionless nozzle-to-surface distance (L/d) from 6 to 10, the dimensionless surface curvature (d/D) 0.056, and the various rib types (height(d$_{1}$) from 1 to 2 mm, pitch (p) from 6 to 32 mm). It was found that the average Nusselt numbers on the convex surface with rib are higher than those without rib, mainly due to an increase in the turbulent intensity caused by flow separation, recirculation and reattachment on the wall surface. In addition, we compared the results by the steady-state method using the gold-film Intrex with those by the transient method.

단축압출기 고체수송부에서의 비등온 열전달 현상에 관한 수치 해석 (Numerical Analysis of the Non-Isothermal Heat Transfer in Solids Conveying Zone of a Single Screw Extruder)

  • 안영철
    • 폴리머
    • /
    • 제29권6호
    • /
    • pp.549-556
    • /
    • 2005
  • 단축압출기의 압출공정에서 고체수송부의 열전달 현상에 미치는 무차원수의 효과를 수치 해석적인 방법으로 연구하였다. 스크루의 기하학적 구조 및 특성에 따른 압출기 내에서의 고체 흐름 상태에 대한 이해를 바탕으로 고체 수송부에 대하여 열 수지 방정식을 세우고 무차원화하였다. 이에 유한체적법과 멱법칙 도식을 적용하여 이산화 방정식을 유도한 다음 반복 대입법과 완화법으로 해를 구하였다. 고체수송부의 열전달 특성을 규정하는 무차원수인 Biot 수와 Peclet 수가 수지 공급부의 온도와 고체수송부의 길이에 끼치는 영향을 조사하였다. Biot 수가 증가하면 냉각에 의한 열 손실이 지배하여 배럴의 온도는 급격히 감소하지만 고체층의 온도와 고체수송부의 길이에 미치는 영향은 적으며, Peclet 수가 증가하면 대류 항이 지배하여 고체층의 온도가 감소하고 고체수송부의 길이가 증가한다.

Numerical simulation of air discharged in subcooled water pool

  • Y. Cordova ;D. Blanco ;Y. Rivera;C. Berna ;J.L. Munoz-Cobo ;A. Escriva
    • Nuclear Engineering and Technology
    • /
    • 제55권10호
    • /
    • pp.3754-3767
    • /
    • 2023
  • Turbulent jet discharges in subcooled water pools are essential for safety systems in nuclear power plants, specifically in the pressure suppression pool of boiling water reactors and In-containment Refueling Water Storage Tank of advanced pressurized water reactors. The gas and liquid flow in these systems is investigated using multiphase flow analysis. This field has been extensively examined using a combination of experiments, theoretical models, and Computational Fluid Dynamics (CFD) simulations. ANSYS CFX offers two approaches to model multiphase flow behavior. The non-homogeneous Eulerian-Eulerian Model has been used in this work; it computes global information and is more convenient to study interpenetrated fluids. This study utilized the Large Eddy Simulation Model as the turbulence model, as it is better suited for non-stationary and buoyant flows. The CFD results of this study were validated with experimental data and theoretical results previously obtained. The figures of merit dimensionless penetration length and the dimensionless buoyancy length show good agreement with the experimental measurements. Correlations for these variables were obtained as a function of dimensionless numbers to give generality using only initial boundary conditions. CFD numerical model developed in this research has the capability to simulate the behavior of non-condensable gases discharged in water.

수직 등온 평행 평판에서 상호작용 유동이 대류 열전달에 미치는 영향 (The Effect of the Interactive Flow on Convective Heat Transfer from two Vertical Isothermal Parallel Plates)

  • 김상영;정한식;권순석
    • 대한기계학회논문집
    • /
    • 제16권4호
    • /
    • pp.765-774
    • /
    • 1992
  • 본 연구에서는 수직 등온 평행평판의 혼합대류 열전달에 대하여 두 평판의 길 이가 다른 경우를 고찰하고자 Reynolds수, Grashof수, 평판간격을 변수로 하여 수치해 석 하였다.

저 레이놀즈 수 평판 디퓨져 유동 수치적 연구 (Numerical Study of Planar Diffuser Flows at Very Low Reynolds numbers)

  • 오종윤
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2005년도 제25회 추계학술대회논문집
    • /
    • pp.110-113
    • /
    • 2005
  • This paper presents flow regime maps of two-dimensional, planar diffusers with constant-area ducts at very low Reynolds numbers. They are obtained from numerical calculations using the commercial CFD program CFD-ACE+. The Reynolds numbers considered are 63, 105, and 210. For each Reynolds number, a wide range of geometric parameters of dimensionless diffuser length, which is a ratio of diffuser length to throat width, $1 and divergence half angle $1^{\circ}<\phi<50^{\circ}$ are selected to obtain steady-state solutions. These maps can be served as a guideline to designers for very low Reynolds number diffuser flows.

  • PDF

단일수직(單一垂直)한 축방향(軸方向)의 핀을 가진 수평전도관(水平傳導管)으로 부터의 자연대류(自然對流) (Natural Convection from a Horisontal Conducting Tube with One Vertical Axial Fin.)

  • 정한식;권순석
    • 태양에너지
    • /
    • 제6권1호
    • /
    • pp.60-69
    • /
    • 1986
  • Two-dimensional finite difference numerical analysis is used to study conjugate natural convection heat transfer from a horizontal conducting tube with one vertical axial fin. By increasing dimensionless fin length ($L_F$), the mean total Nusselt number of the upward fin is slightly less than that of the downward fin at $L_F\;{\le}\;0.18$ and is higher than that of the downward fin at $L_F\;>\;0.18$. However comparing the upward fin and the downward fin with the no fin, the mean total Nusselt numbers of downward fin and upward fin at $L_F=0.30$ are increased approximately 4.01% and 5.51%, respectively. As Rayleigh number, Prandtl number and Biot number increase, the mean total and the mean tube Nusselt numbers are increased, but as wall thickness increases, the mean total and the mean tube Nusselt numbers are decreased. As the fin conduction parameter increases, the mean total Nusselt number is slightly increased because of increasing the mean fin Nusselt number.

  • PDF

디젤 엔진 운전 조건에서 분무 연소 과정과 난류 화염 구조 특성에 대한 해석 (Characteristization of Spray Combustion and Turbulent Flame Structures in a Typical Diesel Engine Condition)

  • 이영재;허강열
    • 한국연소학회지
    • /
    • 제14권3호
    • /
    • pp.29-36
    • /
    • 2009
  • Simulation is performed to analyze the characteristics of turbulent spray combustion in a diesel engine condition. An extended Conditional Moment Closure (CMC) model is employed to resolve coupling between chemistry and turbulence. Relevant time and length scales and dimensionless numbers are estimated at the tip and the mid spray region during spray development and combustion. The liquid volume fractions are small enough to support validity of droplets assumed as point sources in two-phase flow. The mean scalar dissipation rates (SDR) are lower than the extinction limit to show flame stability throughout the combustion period. The Kolmogorov scales remain relatively constant, while the integral scales increase with decay of turbulence. The chemical time scale decreases abruptly to a small value as ignition occurs with subsequent heat release. The Da and Ka show opposite trends due to variation in the chemical time scale. More work is in progress to identify the spray combustion regimes.

  • PDF