• 정보관리학회지
• /
• 제28권2호
• /
• pp.79-96
• /
• 2011

인용분석은 학자들의 연구실적 평가에 가장 많이 사용되는 방법 중 하나이지만 비평가들은 오늘날의 인용분석 자료와 방법론에 근본적인 문제가 있다고 주장한다. 전통적 인용분석 방식은 인용품질과 인용소음뿐만 아니라 언어, 시간, 문화와 같은 비수치적인 요소들을 고려하지 않아 단순하고 그릇된 평가를 가져올 수 있으며, 적용 범위가 각각 다르고 불완전한 인용 데이터베이스들은 충돌적인 인용분석결과를 초래하기 쉬울 수 있다. 이러한 문제들을 해결하려면 포괄적인 인용데이터를 다 방면과 다 방식으로 분석하는 새로운 인용분석연구가 필요하다. 본 논문은 Web of Science, Scopus와 Google Scholar를 비교 분석한 연구의 결과를 논의하며 기존의 인용분석 방법의 약점을 극복하기 위해 설계한 CiteSearch라는 프로토타입 시스템을 간략하게 설명한다.

• 한국방사선학회논문지
• /
• 제2권4호
• /
• pp.41-46
• /
• 2008

CT는 단층촬영을 이용한 의학적인 영상 진단 기법이다. CT는 3차원적인 방사선학적 영상 기법으로 염증의 평가에는 적합하지 않으나, 석회화된 조직을 직접적인 3차원 영상으로 보여주므로 뼈 손상의 평가에는 유용하다. 본 연구는 실험적으로 유도된 랫드의 보조관절염에서 관절의 병리학적 변화와 뼈 파괴의 정량적 분석을 3차원 CT 영상을 통하여 평가하고자 실시되었다. 그 결과 랫드의 보조관절염에서 병변의 파괴성 진행이 3차원 CT 영상을 통해 정량화될 수 있었고, 따라서 관절염 질환의 상태 및 실험적인 치료 약제의 효능 평가에 3차원 CT 영상 기법이 효과적일 것으로 생각된다.

• 대한공간정보학회지
• /
• 제22권3호
• /
• pp.137-143
• /
• 2014

최근 정부는 정부3.0이라는 새로운 정부운영의 패러다임으로 공공데이터를 적극적으로 개방하고 공유하는 정책을 펼치고 있다. 이와 함께 국토교통부에서는 국가공간정보 및 3차원건물, 영상지도를 포함한 다양한 콘텐츠를 일반인에게 제공하는 공간정보 오픈플랫폼 통합지도서비스(이하 브이월드)를 운영하고 있다. W3C재단의 오픈데이터 현황 보고서(2013)의 평가결과 우리나라는 정부의 정책적 지원 및 계획 부분에서는 긍정적인 결과를 나타낸 반면 데이터 관리 분야에서 취약하여 이에 대한 품질개선이 필요한 실정이다. 또한, 3차원 공간정보 객체 데이터(이하 3차원 모델)의 경우 데이터 구축에 활용한 디지털항공사진영상의 최신성이 부족하여 데이터의 현행화가 필요하다. 이에 본 논문에서는 3차원 모델의 품질요소인 수직위치 정확도에 대해 공공데이터이며, 실측 데이터인 건축물 대장의 높이 데이터를 기준으로 국내표준 품질평가 기법을 적용하여 데이터 품질을 측정하고, 측정오차에 대한 원인을 분석하여 공공데이터를 활용한 3차원 모델의 수직위치 정확도 향상 및 최신성의 유지 가능성을 제시하고자 한다. 연구 수행 결과 건축물대장의 높이 값을 품질평가 기준으로 적용하였을 경우 수직위치 정확도가 향상되는 것을 확인하였으며, 건축물 대장의 재건축, 증축 정보를 활용할 경우 3차원 모델의 최신성의 유지를 할 수 있음을 확인하였다.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.13-22
• /
• 2020

Reinforcement steel fixing is a skilled and manually intensive construction trade. Current practice for the quality assessment of reinforcement steel fixing is normally performed by fabricators and has high potential in having errors due to the tedious nature of the work. In order to overcome the current inspection limitation, this study presents an approach that provides visual assistance and inspection enhancement for inspectors to assess the dimensional layout of reinforcement steel fixing. To this end, this study aims to establish an end-to-end framework for rebar layout quality inspection using laser scanning and Augmented Reality (AR). The proposed framework is composed of three parts: (1) the laser-scanned rebar data processing; (2) the rebar inspection procedure integrating with AR; and (3) the checking and fixing the rebar layout through AR visualization. In order to investigate the feasibility of the proposed framework, a case study assessing the rebar layout of a lab-scaled formwork containing two rebar layers is conducted. The results of the case studies demonstrate that the proposed approach using laser scanning and AR has the potential to produce an intuitive and accurate quality assessment for the rebar layout.

• 한국환경복원기술학회지
• /
• 제24권2호
• /
• pp.115-126
• /
• 2021

Strategic Environmental Impact Assessment (SEA) is a decision-making process taking into account the environmental impact, economic and social impact of policies, plans, and programs at the higher stage prior to the project plan for promoting sustainable development. In this study, we analyzed the process and criteria for selecting appropriate alternatives when establishing development plan in SEA. First, the criteria for estimating changes in ecosystem services following the implementation of development project of industrial complex were presented. Second, alternative evaluations were conducted through an analysis of ecosystem service scenarios to explore suitable alternatives in Anseong. As a result, the environmental quality of selected area as the existing project site deteriorated according to the implementation of the project, and the dimensional reduction technique confirmed that the change in ecosystem service factors in project area was the optimal location. In addition, the results of the scenario assessment to explore suitable alternatives in Anseong City showed that the existing site had large capacity in terms of water quality control services (scenario 1), scenario 2 in terms of preconditioning services, and scenario 3 in terms of water supply services. The guidance of Ecosystem service assessment is expected to be available in decision-making of large-scale strategies (e.g., SEA) and projects by presenting more quantitative criteria for determining the adequacy and location feasibility of development plans and policy plans. This is expected to require various support, including legislation and revision of related laws, believed to be supported by advanced research.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2000년도 춘계 학술대회논문집
• /
• pp.146-152
• /
• 2000

Two and Three dimensional dynamic adaptation code is developed for transient computations. This code involves mesh refinement and coarsening to either add points in high gradient regions of flow or remove points where they are not needed, for high spatial accuracy. Temporary cell algorithm is used to maintain the original grid quality. To show the assessment of the accuracy and efficiency, two dimensional study and unsteady flows are computed. Also, three dimensional steady computations are made to assess the refinement using temporary cell algorithm. The result shows the high spatial accuracy primarily in discontinuity regions in steady and unsteady computation.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.173-178
• /
• 2024

본 논문에서는 스테레오 비전 센서를 이용한 프리팹 강구조물(PSS: Prefabricated Steel Structures)의 조립부 형상 품질 평가 기법을 소개한다. 스테레오 비전 센서를 통해 모형의 조립부 영상과 포인트 클라우드 데이터를 수집하였으며, 퍼지 기반 엣지 검출, 허프 변환 기반 원형의 볼트 홀 검출 등의 영상처리 알고리즘을 적용하여 조립부 영역의 볼트홀을 검출하였다. 영상 내 추출된 볼트홀 외곽선 위 세 점의 위치 정보에 대응되는 3차원 실세계 위치 정보를 깊이 영상으로부터 획득하였으며, 이를 기반으로 각 볼트홀의 3차원 중심 위치를 계산하였다. 통계적 기법 중 하나인 주성분 분석 알고리즘(PCA: Principal component analysis) 알고리즘을 적용함으로써 3차원 위치 정보를 대표하는 최적의 좌표축을 계산하였다. 이를 통해 센서의 설치 방향 및 위치에 따라 센서와 부재 간 평행이 아니더라도 안정적으로 볼트홀 간의 거리를 계측하도록 하였다. 각 볼트홀의 2차원 위치 정보를 기반으로 볼트홀의 순서를 정렬하였으며, 정렬된 볼트홀의 위치 정보를 바탕으로 인접한 볼트홀 간의 각 축의 거리 정보를 계산하여 조립부 볼트홀 위치 중심의 형상 품질을 분석하였다. 측정된 볼트홀 간의 거리 정보는 실제 도면의 거리 정보와의 절대오차와 상대오차를 계산하여 성능 비교를 진행하였으며, 중앙값 기준 1mm 내의 절대오차와 4% 이내의 상대오차의 계측 성능을 확인하였다.

• 한국물환경학회지
• /
• 제32권3호
• /
• pp.243-252
• /
• 2016

In cases of water pollution accidents, accurate prediction for arrival time and concentration of contaminants in a river is essential to take proper measures and minimize their impact on downstream water intake facilities. It is critical to fully understand the behavior characteristics of contaminants on river surface, especially in case of oil spill accidents. Therefore, in this study, the effects of main parameters of advection and diffusion of contaminants were analyzed and validated by comparing the results of Lagrangian particle tracking (LPT) simulation of Environmental Fluid Dynamic Code (EFDC) model with those of Global Position System (GPS)-equipped drifter experiment. Prevention scenario modeling was accomplished by taking cases of movable weir operation into account. The simulated water level and flow velocity fluctuations agreed well with observations. There was no significant difference in the speed of surface particle movement between 5 and 10 layer modeling. Therefore, 5 layer modeling could be chosen to reduce computational time. It was found that full three dimensional modeling simulated wind effects on surface particle movements more sensitively than depth-averaged two dimensional modeling. The diffusion range of particles was linearly proportional to horizontal diffusivity by sensitivity analysis. Horizontal diffusivity estimated from the results of GPS-equipped drifter experiment was 0.096 m²/sec, which was considered to be valid for applying the LPT module in this area. Finally, the scenario analysis results showed that particle movements could be stagnant when discharge from the upstream weir was reduced, implying the possibility of securing time for mitigation actions such as oil boom installation and wiping oil contaminants. The outcomes of this study can help improve the prediction accuracy of particle tracking simulation to establish the most suitable mitigation plan considering the combination of movable weir operation.

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.181-195
• /
• 2015

Algal blooms in lakes are one of major environmental issues in Korea. A three-dimensional, hydrodynamic and water quality model was developed and tested in Lake Euiam to assess the performance and limitations of numerical modeling with multiple algal groups using field data commonly collected for algal management. In this study, EFDC was adopted as the basic model framework. Simulated vertical profiles of water temperature, dissolved oxygen and nutrients monitored at five water quality monitoring stations from March to October 2013, which are closely related to algal dynamics simulation, showed good agreement with those of observed data. The overall spatio-temporal variations of three algal groups were reasonably simulated against the chlorophyll-a levels of those estimated from the limited monitoring data (chlorophyll-a level and cell numbers of algal species) with the RMSEs ranging from 2.6 to $17.5mg/m^3$. Also, note that $PO_4-P$ level in the water column was a key limiting factor controlling the growth of three algal groups during most of simulation period. However, the algal modeling results were not fully attainable to the levels of observation during short periods of time showing abrupt increase in algae throughout the lake. In particular, the green algae/cyanobacteria and diatom simulations were underestimated in late June to early July and early October, respectively. The results shows that better understanding of internal algal processes, neglected in most algal modeling studies, is necessary to predict the sudden algal blooms more accurately because the concentrations of external $PO_4-P$ and specific algal groups originated from the tributaries (mainly, dam water releases) during the periods were too low to fully capture the sharp rise of internal algal levels. In this respect, this study suggests that future modeling efforts should be focused on the quantification of internal cycling processes including vertical movement of algal species with respect to changes in environmental conditions to enhance the modeling performance on complex algal dynamics.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.37-46
• /
• 2003

This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.