• Title/Summary/Keyword: dilution effects

Search Result 406, Processing Time 0.025 seconds

High Productivity Ethanol Fermentation Using Flocculant Yeast (응집성 효모에 의한 고생산성 알콜 발효)

  • 손석민;김인규;변유량
    • Microbiology and Biotechnology Letters
    • /
    • v.20 no.5
    • /
    • pp.607-613
    • /
    • 1992
  • A tower fermentor equipped with a modified settler was used for ethanol fermentation using highly flocculating yeast, Saccharomyces uvarum. The settler was constructed of glass column divided into two chambers by a funnel shaped divider. Gas was allowed to escape from lower chamber of the settler through a small tube. This design significantly reduced the turbulence in upper chamber of the settler and made it possible to operate at high dilution rate. Using the tower fermentor, the effects of operating conditions such as initial glucose concentration, dilution rate and cell recycle ratio were studied. The maximum ethanol productivity, 64.0 g/l' h was obtained at a dilution rate 1.1 h -1 and a cell recycle ratio 5 with the corresponding ethanol concentration of 58.8 g/l, and cell mass of 88 g/l.

  • PDF

Effect of PDMS Index Matching Layer on Characteristics of Mn-Doped SnO2 (MTO)/Ag/MTO/PDMS/MTO Transparent Electrode (PDMS 굴절 조정층이 Mn-Doped SnO2 (MTO)/Ag/MTO/PDMS/MTO 투명전극의 특성에 미치는 영향)

  • Jo, Young-Su;Jang, Gun-Eik
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.31 no.6
    • /
    • pp.408-411
    • /
    • 2018
  • We fabricated highly flexible Mn-doped $SnO_2$ (MTO)/Ag/MTO/polydimethylsiloxane (PDMS)/MTO multilayer transparent conducting films. To reduce refractive-index mismatching of the MTO/Ag/MTO/polyethylene terephthalate (PET), index-matching layers were inserted between the oxide-metal-oxide-structured films and the PET substrate. The PDMS layer was deposited by spin-coating after adjusting the mixing ratio of PDMS and hexane. We investigated the effects of the index-matching layer on the color and reflectance differences with different PDMS dilution ratios. As the dilution ratio increased from 1:100 to 1:130, the color difference increased slightly, while the reflectance difference decreased from 0.62 to 0.32. The MTO/Ag/MTO/PDMS/MTO film showed a transmittance of 87.18~87.68% at 550 nm. The highest value of the Haacke figure of merit was $47.54{\times}10^{-3}{\Omega}^{-1}$ for the dilution ratio of 1:130.

Effect of $CO_2$ dilution on Combustion Instabilities in dual premixed flame (이중 예혼합화염에서 $CO_2$ 희석이 연소불안정에 미치는 영향)

  • Lee, Kang-Yeop;Kim, Hyung-Mo;Park, Poo-Min;Hwang, O-Sik;Yang, Soo-Seok;Ko, Young-Sung
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2011.11a
    • /
    • pp.763-768
    • /
    • 2011
  • The effects of $CO_2$-dilution on combustion instability were studied in order to apply biogas in a dual lean premixed gas turbine combustor on a real-scale dual lean premixed burner head which is originally developed for Natural Gas fuel. Combustion instability is reduced by $CO_2$ dilution effect according to the result of dynamic pressure signal and phase-resolved $OH^*$ images. The reason for this is that dilution of $CO_2$ reduces heat release perturbation and increases flame volume due to reduction of the flame speed and expansion of flame surface.

  • PDF

Usefulness of DECT Application for Compensation of Image Contrast Difference According to CT Contrast Agent Density (CT 조영제 농도에 따른 영상 대조도 차 보상을 위한 DECT 적용의 유용성)

  • Hyeon-Ju Kim
    • Journal of the Korean Society of Radiology
    • /
    • v.17 no.3
    • /
    • pp.417-422
    • /
    • 2023
  • In this study, normal saline was diluted with the contrast medium at a certain ratio for the purpose of reducing the image quality poor and side effects caused by the contrast medium during CT examination. At this time, by finding the energy level of DECT that can compensate for the decrease in contrast of the image according to the degree of dilution, the usefulness of applying DECT for compensating the difference in image contrast was investigated through comparative analysis by applying SNR, CNR, and SSIM. As a result, when a dilution ratio of 4 (contrast medium): 6 (normal saline) and the energy level of DECT of 65 keV were applied, the contrast difference was the most similar to that when using the undiluted contrast medium. At this time, SNR was 813.71 ± 37.6, CNR was the highest at 921.87 ± 17.1, and SSIM index was measured at 0.851, which is the most similar to 1. The results of this study are meaningful in providing basic information for finding the appropriate dilution rate and energy level for each examination site through future clinical studies. It is believed that it can be reduced.

Toothbrush sterilizing effects of using microwave (Microwave를 이용한 칫솔 살균효과)

  • Ji, Yun-Jeong
    • Journal of Korean society of Dental Hygiene
    • /
    • v.12 no.3
    • /
    • pp.641-646
    • /
    • 2012
  • Objectives : The purpose of this study is to analyze the sterilizing effects of toothbrushes by administering bacteria into toothbrushes and reproducing the antibacterial effects using a microwave oven. Methods : The heads of four-row mid-strength toothbrushes were cut, put in a bacterial solution ($3{\times}10^9cells/ml$) for vortexing, and sterilized with microwaves for 0, 30, and 60 seconds. They were then moved into four tubes containing DW 10 ml and suspended in a vortex mixer for two minutes to separate bacteria from them. DW 9ml was added by 1ml of bacteria for dilution of $10{\sim}10^6$ times. It was then administered to the BHI agar plate by 0.1ml and cultured at $37^{\circ}C$ for 24 hours. Total number of bacteria adhered to a toothbrush was obtained by multiplying the number of colonies by the dilution factor. The experiment was done in the first, second, and third step, being repeated in a normal temperature drier ($23^{\circ}C$) after 5, 9 and 24 hours. Results : The results of the experiment revealed that the sterilizing effects were 95% or over. When toothbrushes were sterilized for 60 seconds, the number of colonies is about 11 after drying for 5 hours, 7 after drying for 9 hours and 2 after drying for 24 hours. The sterilizing effects reached 98% when the bacteria-administered toothbrush was sterilized for 1 minute after drying for 24 hours. Conclusions : The results demonstrated that toothbrush sterilizing by using microwave is a suitable way to prevent cross-contamination of toothbrushes by oral bacterial infection and thus easy to use at home. However, this study suggests that toothbrush sterilizing by using microwave should be limited within two times a week because the physical properties of toothbrush might be changed.

Heterogeneous Ignition of $H_2/O_2/CO_2$ Mixture Over Platinum Catalyst (수소/산소/이산화탄소 혼합기의 백금촉매반응특성 : 비균일 반응의 점화 온도)

  • Nam, Chang-Ho;Shin, Hyun-Dong
    • 한국연소학회:학술대회논문집
    • /
    • 2001.11a
    • /
    • pp.90-96
    • /
    • 2001
  • Catalytic ignition of $H_2/O_2/CO_2$ mixtures over platinum catalyst is experimentally investigated by using microcalorimetry. For comparison, $N_2$ and Ar is also used as diluent gas. The gas mixture flows toward platinum foil heated by electric current at atmosphere pressure and ambient temperature. The ignition temperature range 350-445K according to the fuel ratio, dilution ratio and diluent gas. It increases as the fuel ratio and dilution ratio increase. $H_2/O_2$ mixture with $CO_2$ ignites at higher temperature than with other diluents by 30-50K. Several experimental evidences show the inhibition effects of $CO_2$ in $H_2-O_2$ heterogeneous reaction is considerable

  • PDF

Effects of Diluted Silica Slurry and Abrasives on the CMP Characteristics (실리카 슬러리의 희석과 연마제의 첨가가 CMP 특성에 미치는 영향)

  • 박창준;김상용;서용진
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.10
    • /
    • pp.851-857
    • /
    • 2002
  • CMP(chemical mechanical polishing) process has been attracted as an essential technology of multi~level interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40%. So, we focused how to reduce the consumption of raw slurry In this paper, we presented the pH changes of diluted slurry and pH control as a function of KOH contents. Also, the removal rates of slurry with different dilution ratio were investigated. Finally, the CMP characteristics were discussed as a function of silica (SiO$_2$) abrasive contents.

The Effects of Diluted Slurry on the CMP Characteristics (희석된 슬러리가 CMP 특성에 미치는 영향)

  • Park, Chang-Jun;Park, Sung-Woo;Lee, Kyoung-Jin;Kim, Ki-Wook;Jeong, So-Young;Kim, Chul-Bok;Choi, Woon-Shik;Kim, Sang-Yong;Seo, Yong-Jin
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2002.05c
    • /
    • pp.18-22
    • /
    • 2002
  • CMP(chemical mechanical polishing) process has attracted as an essential technology of multilevel interconnection. However, the COO(cost of ownership) is very high, because of high consumable cost. Especially, among the consumables, slurry dominates more than 40%. So, we focused that it has how to reduce the consumption of raw slurry. In this paper, we presented the pH changes of diluted slurry and pH control as a function of KOH contents. Also, the removal rates of slurry with different dilution ratio was investigated. Finally, CMP the characteristics as a function of silica($SiO_2$) abrasive contents were discussed.

  • PDF

Antibacterial Activity and Synergism of Hydnocarpi Semen Extracts with Ampicillin or Oxacillin against Methicillin-resistant Staphylococcus aureus

  • Joung, Dae Ki;Shin, Dong Young;Kwon, Dong Yeul;Shin, Dong Won
    • Korean Journal of Plant Resources
    • /
    • v.29 no.6
    • /
    • pp.699-703
    • /
    • 2016
  • Methicillin-resistant Staphylococcus aureus (MRSA) is a serious clinical and an urgent problem worldwide. Few new drugs are available against MRSA, because MRSA has the ability to acquire resistance to most antibiotics, which consequently increases the cost of medication. In the present study, the antibacterial activity of Hydnocarpi Semen was investigated. The most effective method is to develop antibiotics from the natural products without having any toxic or side effects. Therefore, there is a need to develop alternative antibacterial drugs for the treatment of infectious diseases. Five Clinical isolates (MRSA) were obtained from five different patients at Wonkwang University Hospital (Iksan, South Korea). The Other 2 strains were ATCC 33591 (Methicillin-resistant strain) and ATCC 25923 (Methicillin-susceptible strain). Antibacterial activity (Minimal Inhibitory Concentrations, MICs) was determined by broth dilution method, disk diffusion method, MTT test, and checkerboard dilution test. Antibacterial activity of n-hexane fraction was remarkable, and had a MICs ranging from $31.25-125{\mu}g/m{\ell}$. FICI values for HFH+AM and HFH+OX were 0.13-0.19 and 0.04-0.29, showing the increase of synergistic effect. When combined together, these antibacterial effects were dramatically increased.

Effects of Application Times and Dilution of Cattle Slurry on Orchardgrass (Dactyljs glomerata L.) (가축분뇨의 시용시기와 희석이 목초의 건물생산에 미치는 영향)

  • Cho, Ik-Hwan;Lee, Ju-Sam;Ahn, Jong-Ho
    • Korean Journal of Organic Agriculture
    • /
    • v.12 no.2
    • /
    • pp.209-217
    • /
    • 2004
  • The aim of this experiment was to investigate the effects of applying times and dilution rates of cattle slurry on dry matter yields of orchard grass. Cattle slurry was applied at the rates of average mineral nitrogen fertilizer equivalent to 150 kg/ha/year in 3 cutting frequency. Significantly higher dry matter yields than that of no fertilization (3.04 ton DM/ha) were recorded in the application of diluted cattle slurry(5.38~6.25 ton DM/ha) (p<0.05). Especially, this tendency was shown with higher annual dry matter yields at the partitioned dressing times, such as at the applications for 1st and 2nd growth, 1st and 3rd growth, and 1st, 2nd and 3rd growth respectively. The yields of annual dry matter both at fertilizing phosphorus and potassium, and phosphorus, potassium and nitrogen were higher than no fertilization as 5.41 tons and 8.78 tons per ha respectively. However, with application of diluted cattle slurry, dry matter yield par year (5.84 ton DM/ha) was higher than those of fertilizing phosphorus and potassium. The efficiencies of dry matter production with mineral and cattle slurry nitrogen application (kg DM/kg N) were 225 and 15.8~18.7 kg DM/kg N respectively. Especially, these tendencies were higher in diluted application plots than in no-diluted application plots of cattle slurry.

  • PDF