• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1999년도 제19회 KOSCO SYMPOSIUM 논문집
• /
• pp.201-207
• /
• 1999

The combustion characteristics for the low NOx 50 kW-class gas turbine combustor have been experimentally investigated. In order to achieve the premixing and the lean burn combustion, the geometries of the primary zone including premixed chamber were modified from conventional combustor. The centerline profiles of CO and NO concentration, and temperature were measured for the premixed combustors with or without dilution holes in the liner. The effects of the pilot fuel injection rate and air dilution on flame stabilization and pollutant (CO, NO) emission are discussed in detail.

• 응용통계연구
• /
• 제25권4호
• /
• pp.633-640
• /
• 2012

Biological methods are described for the assay of certain substances and preparations whose potency cannot be adequately assured by chemical or physical analysis. The principle applied through these assays is of a comparison with a standard preparation to determine how much of the examined substance produces the same biological effects as a given quantity (the Unit) of the standard preparation. In these dilution assays, to estimate the relative potencies of the unknown preparations to the standard preparations, it is necessary to compare dose-response relationships of standard and unknown preparations. The dose-response relationship in the dilution assay is non-linear and sigmoid when a wide range of doses is applied. The parallel line model (applied to the dose region with the steepest slope) is used to estimate the relative potency. In this paper, the statistical theory in the parallel line model is explained with an application to a dilution assay data. The parallel line method is implemented in a SAS program and is available at the author's homepage(http://cafe.daum.net/go.analysis).

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.1023-1030
• /
• 2001

The tensile properties of short nylon6 fiber reinforced NR and SBR have been investigated as functions of diameter ratio(DR), interphase condition, fiber aspect ratio(AR), and fiber content. The short-fiber(DR=3 and AR=2) reinforced SBR did not show the dilution effect for all interphase conditions. And the short-fiber(DR=3 and AR=2) reinforced NR did not show the dilution effect except for the no-coating. The better interphase condition, the lower dilution effect at same DR. The tensile moduli are significantly improved due to fiber content and diameter ratio at same interphase condition. The pull-out force increased with the DR. The better interphase condition, the higher pull-out force at same DR. It is found that the DR and AR have an important effect on tensile properties.

• 한국표면공학회지
• /
• 제37권5호
• /
• pp.279-288
• /
• 2004

This paper describes a three-dimensional transient finite element model for a laser cladding process. In the model, an adaptive finite element technique is used for dilution control. Using the proposed finite element model, the effects of process parameters such as scanning speed, laser's power, and preheating on the dilution of clad layer, the shape of melting pool, and the temperature distribution are calculated. It is also shown that the optimal process parameters for the required dilution can be determined from the proposed finite element model. An experiment is performed to validate the proposed model. The numerical results are compared with experimental ones.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.67-73
• /
• 2009

Recently, Europe decided to start the regulation of diesel engine nanoparticles because of its well known adverse health effects. The diesel nanoparticles can be classified as solid carbon particles and volatile particles. The volatile particles generates during dilution process by condensation of gas phase volatile compounds such as hydrocarbon. The new nanoparticle regulation considers only solid particles because of difficulty of measurement of volatile particles. The aim of this study is to suggest a proper dilution method that prevent the volatile particle generation. As a result, it is found that the $1^{st}$ dilution air temperature should be above $120^{\circ}C$ in order to prevent volatile particle generation effectively. It is also found that the volatile particles can be removed effectively in the evaporation tube by the increase of evaporation tube temperature. But when exhaust gas is hot enough (>$190^{\circ}C$, in this study) and it is diluted in the first diluter with high temperature air (>$120^{\circ}C$), removal phenomenon of volatile particles by increasing of evaporation tube temperature can not be seen. It means that there are no volatile particles in the diluted exhaust gas. Additionally, dilution ratio is not an important factor for volatile particle generation compared with dilution air temperature or evaporation tube temperature.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.13-18
• /
• 2007

When triple flames propagated in a diverging channel, the effects of fuel dilution on the lift-off characteristics of triple flames were investigated. A multi-slot burner was used to stabilize the lift-off flame especially at weak fuel concentration gradients. It was reported that there is a maximum propagation velocity at a critical concentration gradient in an open jet regardless of fuel dilution. The enhancement of a diffusion flame affected to increase the propagation velocity around critical concentration gradients. However, the influence of a confined channel on the structure of triple flames according to fuel dilution needs to be investigated compared with an open jet case. This study aimed to examine the effect of a confined channel on the structure and the propagation velocity of the triple flames according to fuel dilution. Lift-off height and propagation velocity of triple flames were investigated by employing three kinds of fuel compositions diluted by nitrogen (0%, 25%, 50% $N_2$), Fuel dilution reduced the propagation velocity of triple flame in a confined channel mainly due to the decrease of flame temperature in premixed branch. Despite the difference in fuel dilution, the propagation velocity has a maximum value at a specific fuel concentration gradient even though the critical concentration gradient increases with fuel dilution. And the critical concentration gradient in a confined channel is larger than that in an open jet due to enhancement of convective diffusion.

• 한국가금학회:학술대회논문집
• /
• 한국가금학회 2003년도 제20차 정기총회 및 학술발표회
• /
• pp.107-108
• /
• 2003

채취한 정액에 대하여 희석액의 배율을 달리하고 보존온도를 다르게 하여 3시간 보존 후 정자의 운동성 및 수정률을 조사한 결과, 정자 운동성은 5$^{\circ}C$ 냉장보존 온도에서 희석배율에 따른 차이를 보이지 않았으나, $25^{\circ}C$ 상온보존에서는 정액과 희석액이 1:1 희석배율보다 1：3 및 1：6 희석배율이 정자 운동성이 현저히 높았고(P<0.05), 35$^{\circ}C$ 고온보존에서도 1:1 희석배율보다 1:3 및 1:6 희석배율이 정자 운동성이 현저히 높은 것으로 나타났다(P<0.05). 5$^{\circ}C$에서 3시간 냉장보존 후 인공수정을 하였을 때 1:1~1:6의 희석배율에 따른 수정률의 차이를 보이지 않았고, $25^{\circ}C$ 상온보존에서도 희석배율에 따른 수정률의 차이를 보이지 않았으나, 35$^{\circ}C$의 고온보존에서는 1：1 희석배율보다 1:3 및 1:6 희석배율에서 수정률이 현저히 향상되었다(P<0.05). 이상의 결과로 보아 여름철 고온시는 1:1의 희석배율보다는 1:3 이상의 희석배율을 사용함이 좋을 것으로 사료된다.

• 대한수의학회지
• /
• 제34권2호
• /
• pp.335-338
• /
• 1994

The tests on the oocysticidal effects of three formulations (75% o-dichlorobenzene, 7.5% cresol combined with morestan 0.5%, 1.0%, 1.5%, respectively) against immature oocysts of Eimeria tenella, were carried out. A o-dichlorobenzene preparation (72.5% o-dichlorobenzene, 7.5% cresol) on the market was selected and tested as the control. The tests were divided into two ways, the one was evaluated at different dilutions and contact times. The other was performed at different storage days. The test results are summarized as follows. Oocysticidal effects of 100% were revealed at 1 to 3 hours contact time of all morestan combined preparations. On the other hand, the perfect oocysticidal effect was revealed only at 24 hours exposure time of 100 times dilution among dilutes of control preparation. Combined rate of morestan was higher, oocysticidal effect was better. In the latter test, all morestan combined formulations had 100% of oocysticidal effect up to 5 days storage after dilution and 86.4% to 96.7% at two weeks storage after dilution, whereas the oocysticidal effects of the control preparation was gradually decreased by the storage time was passed and there was no effect at 2 weeks storage after dilution. With these results, morestan combined preparations have synergistic effect against oocysts of E tenella and can be used as the most effective oocysticidal disinfectant for broiler industry in future.

• 대한토목학회논문집
• /
• 제5권2호
• /
• pp.75-81
• /
• 1985

분뇨(糞尿) 내의 많은 암모니아의 독성여부(毒性與否)를 검토(檢討)하는 것이 본(本) 연구(硏究)의 목적(目的)이었는데 실험실(實驗室) 소화조(消化槽)가 이용(利用)되었다. 암모니아의 저해작용(沮害作用)은 1.5g/l 정도에서는 관측되었다. 따라서, 이러한 저해작용(沮害作用)을 감소시키기 위하여 분뇨(糞尿)를 희석하여 주입시키는 방법(方法)이 사용될 수 있는데, 희석에 의한 체류기간(滯留期間)의 단축으로 말미암아 소화조(消化槽) 내의 미생물(微生物)이 유실(流失)되므로 사용가능(使用可能)한 희석배수에는 제한(制限)이 있으며, 아울러 적용가능(適用可能)한 유기물질(有機物質) 부하율(負荷率)에도 제한(制限)이 있었다. 1 : 1로 희석시키는 것이 가장 효율적(效率的)인 것으로 나타났는데, 이 때에 적용가능(適用可能)한 최대(最大) 부하율(負荷率)은 $5kg\;COD/m^3/d$ 였다.

• Mycobiology
• /
• 제29권1호
• /
• pp.11-14
• /
• 2001

A preparation of water soluble components(EA) was made from carpophores of Elfvingia applanata(Pers.) Karst and its in vitro antibacterial activity on a number of bacterial species was examined by macrobroth dilution assay. Among 16 species of bacteria tested, the most potent antibacterial activity was observed against Staphylococcus epiderrnidis and Proteus vulgaris, of which MICs were 1.25 mg/ml. To investigate the antibacterial effects in combinations of EA with quinolone antibiotics, such as ciprofloxacin, enoxacin, lomefloxacin, norfloxacin, and ofloxacin, the fractional inhibitory concentrations(FICs) and the fractional inhibitory concentration indices(FICIs) for four bacterial strains were determined by macrobroth dilution checkerboard assay. Combinations of EA and quinolones exhibited either additive or indifferent effects of antibacterial activity in most instances. However, both synergistic and antagonistic effects were not observed in any cases.