• 한국산학기술학회논문지
• /
• 제12권5호
• /
• pp.2416-2424
• /
• 2011

본 연구는 건축에서 모듈화를 중심으로 한 기계적 생산에서 시리얼화를 중심으로 한 디지털 생산 체계로의 변화가 어떠한 방식으로 현대 건축의 외피 디자인 영향을 미치는지를 통해 디지털 기술의 발달이 건축 외피의 매체적 표현 양상의 구축과 적극적으로 공조하고 있음을 파악하려 한다. 이를 바탕으로 헤르죠그와 디모론의 2개의 전시시설의 분석을 통해 외피의 구현이 코드화와 이를 생산하기 위한 부재의 시리얼화라는 개념으로부터 가능하다는 사실을 밝히며 외피가 이미지의 즉각적인 표상을 통해 인간과의 지각적 소통이 가능한 매체적 방식으로 구현되는 과정에서의 디지털 디자인 기술의 역할과 의의를 파악하려 한다.

• Journal of the Optical Society of Korea
• /
• 제13권2호
• /
• pp.245-250
• /
• 2009

We propose a digital holographic interference analysis method based on a 2-frame phase-shifting technique for measuring an optical mirror surface. The technique using 2-frame phase-shifting digital interferometry is more efficient than multi-frame phase-shifting techniques because the 2-frame method has the advantage of a reduced number of interferograms, and then takes less time to acquire the wanted topography information from interferograms. In this measurement system, 2-frame phase-shifting digital interferograms are acquired by moving the reference flat mirror surface, which is attached to a piezoelectric transducer, with phase step of 0 or $\pi$/2 in the reference beam path. The measurements are recorded on a CCD detector. The optical interferometry is designed on the basis of polarization characteristics of a polarizing beam splitter. Therefore the noise from outside turbulence can be decreased. The proposed 2-frame algorithm uses the relative phase difference of the neighbor pixels. The experiment has been carried out on an optical mirror which flatness is less than $\lambda$/4. The measurement of the optical mirror surface topography using 2-frame phase-shifting interferometry shows that the peak-to-peak value is calculated to be about $0.1779{\mu}m$, the root-mean-square value is about $0.034{\mu}m$. Thus, the proposed method is expected to be used in nondestructive testing of optical components.

• 호남수학학술지
• /
• 제32권1호
• /
• pp.141-155
• /
• 2010

In this paper we prove that with some hypothesis the set of k-isomorphism classes of simple closed k-surfaces in ${\mathbf{Z}}^3$ forms a commutative monoid with an operation derived from a digital connected sum, k ${\in}$ {18,26}. Besides, with some hypothesis the set of k-homotopy equivalence classes of closed k-surfaces in ${\mathbf{Z}}^3$ is also proved to be a commutative monoid with the above operation, k ${\in}$ {18,26}.

• 호남수학학술지
• /
• 제30권4호
• /
• pp.589-602
• /
• 2008

As a survey-type article, the paper reviews various digital topological utilities from digital covering theory. Digital covering theory has strongly contributed to the calculation of the digital k-fundamental group of both a digital space(a set with k-adjacency or digital k-graph) and a digital product. Furthermore, it has been used in classifying digital spaces, establishing almost Van Kampen theory which is the digital version of van Kampen theorem in algebrate topology, developing the generalized universal covering property, and so forth. Finally, we remark on the digital k-surface structure of a Cartesian product of two simple closed $k_i$-curves in ${\mathbf{Z}}^n$, $i{\in}{1,2}$.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제34권5호
• /
• pp.555-561
• /
• 2008

Purpose: The goal of this study was to develop a technique for creating a computerized composite maxillofacial-dental model, based on point-based surface best fit algorithm and to test its accuracy. The computerized composite maxillofacial-dental model was made by the three dimensional combination of a 3-dimensional (3D) computed tomography (CT) bone model with digital dental model. Materials and Methods: This integration procedure mainly consists of following steps : 1) a reconstruction of a virtual skull and digital dental model from CT and laser scanned dental model ; 2) an incorporation of dental model into virtual maxillofacial-dental model by point-based surface best fit algorithm; 3) an assessment of the accuracy of incorporation. To test this system, CTs and dental models from 3 volunteers with cranio-maxillofacial deformities were obtained. And the registration accuracy was determined by the root mean squared distance between the corresponding reference points in a set of 2 images. Results and Conclusions: Fusion error for the maxillofacial 3D CT model with the digital dental model ranged between 0.1 and 0.3 mm with mean of 0.2 mm. The range of errors were similar to those reported elsewhere with the fiducial markers. So this study confirmed the feasibility and accuracy of combining digital dental model and 3D CT maxillofacial model. And this technique seemed to be easier for us that its clinical applicability can good in the field of digital cranio-maxillofacial surgery.

• 한국측량학회지
• /
• 제37권6호
• /
• pp.499-506
• /
• 2019

정규수치표면모델(NDSM: Normalized Digital Surface Model)은 원격탐사데이터의 상세 분석을 위한 핵심 적인 자료로 사용된다. 지상기준높이인 정규수치표면모델을 생성하기 위한 가장 간단한 방법은 수치표면모델(DSM: Digital Surface Model)에서 수치지형모델(DTM: Digital Terrain Model)을 차분하는 것이지만, 무인항공기 데이터의 경우 높은 해상도의 특성상 식생, 도심 구조물 등 많은 수의 복잡한 지형지물을 포함하고 있어 정확한 수치지형모델을 추출하기 어렵다. 본 연구에서는 무인항공기 데이터의 고해상도 특성을 잘 살리고 비용효율적인 수치지형모델 생성이 가능하도록 RGB 기반 식생 지수인 ExG (Excess Green)를 이용하여 낮은 ExG 값을 갖는 영역 확장법의 초기 시드점을 선정하였다. 이때 국소적으로 낮은 식생지수 값을 갖는 초기 시드점이 잘못 추출되는 문제를 해결하기 위하여 지역적 윈도우 분석을 적용하였다. 이후, 해당 위치의 수치표면모델값을 바탕으로 영역 확장법을 적용하여 이웃하는 지면 화소들을 병합하였다. 영역 확장법 적용을 위해 경사도 파라미터가 사용되었으며 최종적으로 병합된 세그먼트의 크기가 0.25㎡ 초과일 경우 초기 시드점을 지면점으로 결정하였다. 다양한 경사도 파라미터 값을 설정하여 무인항공기 데이터 기반 정규수치표면모델 생성의 최적 경사도 기준값을 도출하고자 하였다. 최종적으로 추출된 지면점들에 대한 정확도 평가를 수행하였으며 지면점들에 보간법을 적용하여 정규수치표면모델을 생성하고 제안 기법을 농업지역에 적용하여 농작물의 지상기준높이 추출 및 농업 모니터링 가능성을 검증하였다.

• 한국레이저가공학회지
• /
• 제9권1호
• /
• pp.1-7
• /
• 2006

In order to increase the productivity of conventional microstereolithography (MSL), digital micromirror device($DMD^{TM}$) based MSL is proposed and the feasibility of 3D rnicrocomponents fabrication is demonstrated in two ways; free surface and constrained surface techniques. The clearness of optical images at the exposure plane was confirmed for the fabrication of an accurate 3D structure by controlling the dynamic viscosity of FA1260T and the shape accuracy of a structure fabricated with epoxy-based resin ($Somos^{\circledR}$ 10120) was analyzed to determine the optimum curing conditions. After finding the appropriate process variables, the feasibility of multiple microstructures is then demonstrated. Due to the high productivity, MSL using $DMD^{TM}$ showed the potential to replace the existing focused laser beam MSL.

• 한국진공학회지
• /
• 제15권3호
• /
• pp.280-286
• /
• 2006

디지털 합금 (digital-alloy) 성장방법을 사용한 AIGaAs층을 이용하여 $1.3{\mu}m$ vertical cavity surface emitting laser (VCSEL)에 사용될 수 있는 AlGaAs/GaAs distributed Bragg reflector (DBR)를 분자선 에피탁시 (molecular beam epitaxy) 방법을 통해 제작하였다. 3인치 1/4 크기의 기판에 디지털 합금 AlGaAs층을 사용한 DBR을 성장하고 기판 여러 부분에서의 반사율을 측정하여 각 부분 간의 반사율 편차가 0.35%이내임을 확인하였다. TEM 사진을 통한 계면분석을 통해 디지털 합금 AlGaAs층의 조성과 두께가 균일함을 확인하였는데, 이는 디지털 합금 AlGaAs층의 성장시 기판 표면의 온도가 불균일하더라도 크게 영향을 받지 않음을 보여준다. 이를 통해 DBR의 균일성에 따라 소자의 특성에 큰 영향을 받는 InAs 양자점을 활성층으로 사용하는 VCSEL의 수율을 향상시키는데 디지털 합금 AlGaAs층을 이용한 DBR이 응용될 수 있음을 보였다.

• 정보저장시스템학회논문집
• /
• 제8권2호
• /
• pp.44-49
• /
• 2012

We measured the surface flatness of both sides for refractive media using the transmitted digital holography method. To enhance the accuracy of the result, phase-shifting system was used. With two different phase modulation of reference beam, the phase profile of object can be easily obtained. Thus, we proposed the surface measurement method which can measure large area fast, compared with conventional methods. To guarantee the reliability of obtained result, we compared with Zygo measurement system. With the proposed method, the surface flatness of $3.45{\mu}m$ resolution could be obtained.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.61-66
• /
• 2003

This paper describes a novel experiment that measures skin movement with respect to the flexional motion of a hand. The study was based on MR images in conjunction with CAD techniques. The MR images of the hand were captured in 3 different postures with surface markers. The surface markers attached to the skin where employed to trace skin movement during the flexional motion of the hand. After reconstructing 3D isosurfaces from the segmented MR images, the global registration was applied to the 3D models based on the particular bone shape of different postures. Skin movement was interpreted by measuring the centers of the surface markers in the registered models.