• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.217-218
• /
• 1998

We propose a new digital beamforming algorithm using an interpolation filter in ultrasonic imaging systems. We compared the performances of the proposed algorithm to those of the conventional digital bemforming algorisms, post-beamformer and phase rotation beamformer, by a computer simulation and experiments. The results show that the proposed algorithm has better performance than the others.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.2059-2062
• /
• 2002

For detection of digitally modulated signals, the receiver must be provide with accurate carrier phase and symbol timing estimates. So far, tots of algorithms have been suggested for those purposes. In general, a interpolation filter with TED(Timing Error Detection) like Gardner algorithm is popularly used for symbol timing estimate of digital communication receiver. Apart from the performance point of view, a multiplicative operation of any interpolation filter limits the symbol rate of the system. Hence, we suggest a new symbol timing estimate algorithm for high speed burst-mode fixed wireless communication system and analyze its performance in the AWGN channel.

• 전자공학회논문지 IE
• /
• v.44 no.1
• /
• pp.15-19
• /
• 2007

A study to have read does an improvement of an error restoration technology based on the edge direction interpolation that a stop image cared for inside frame correction more than with an image restoration way of a transfer error or with an aim. A way proposed to is based on edge direction detection method of a block utilizing the edge direction which will adjust a part damaged a sweater to a remaining part here. The rest of error pixel used non linear Midian filter for process later data information by the final stage and did interpolation. The examination result shows a good recuperation tendency and low accounts time of a way proposed to realization possibility of a real time image processing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4473-4482
• /
• 2010

The examination of pulse, which is a typical palpation technique in the oriental medicine, has been used conventional analog system for discrimination of 28 pulses. However, the clipping phenomenon in the pulses, which used same feature extraction technique with ECG signals, has been occurred in analog system due to feature extraction method and over amplification from the input signals. It caused inaccurate to analyze the pulse signals. In this paper, we propose a digital filter design technique based on Prony's method for signal modeling and C-spline interpolation for feature extraction from pulse signal to compensate analog pulse detection system. In addition, we suggest a compensated electronic pulse detection system comprising new pulse analyzing algorithm and shape analysis technique for pulses, which were difficult to use in analog system. The feasibility for new proposed system has been confirmed comparing output signals between electronic pulse detection system having proposed filter design techniques with pulse analyzing algorithm and conventional analog system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.3
• /
• pp.1011-1025
• /
• 2014

A demosaicing method for a Bayer-like W-RGB color filter array (CFA) is proposed. When reproducing images from a W-RGB CFA, conventional color separation methods for W-RGB CFA are likely to cause blurring near the edges due to rough averaging using a color ratio of neighboring pixels. Moreover, these methods cannot be applied to real-life digital cameras with W-RGB CFA because the methods were proposed under an ideal situation, W=R+G+B, not a real-life situation, $W{\neq}R+G+B$. To improve edge performance, we propose a method of constant color difference assumption with inversed weight, which uses information from all edge directions for interpolating all missing color channels. The proposed method calculates the correlation between W, R, G, and B to enable its application to real-life digital cameras with W-RGB CFA. Simulations were performed to evaluate the proposed method using images captured from a real-life digital camera with W-RGB CFA. Simulation results shows that we can demosaic by using the proposed algorithm compared with the conventional one in about +34.79% SNR, +11.43% PSNR, +1.54% SSIM and 14.02% S-CIELAB error. Thus, the proposed method demosaics better than the conventional methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5A
• /
• pp.743-750
• /
• 2000

In this paper, low-power block filtering architecture for digital If down sampler and up sampler is proposed. Software radio technology requires low power and cost effective digital If down and up sampler. Digital If down sampler and up sampler are accompanied with decimation filter and interpolation filter, respectively. In the proposed down sampler architecture, it is shown that the parallel and low-speed processing architecture can be produced by cancellation of inherent up sampler of block filter and down sampler. Proposed up sampler also utilizes cancellation of up sampler and inherent down sampler of block filtering structure. The proposed architecture is compared with the conventional polyphase architecture.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.369-375
• /
• 2011

Design is important in the IT, digital appliance, and auto industries. Aesthetic and art images are being applied for better quality of the products. Most image patterns are complex and much lead-time is required to implement them to the product design process. A precise reverse engineering method generating 2.5D engraving models from 2D artistic images is proposed through the image processing, NURBS interpolation and 2.5D reconstruction methods. To generate 2.5D TechArt models from the art images, boundary points of the images are extracted by using the adaptive median filter and the novel MBF (modified boundary follower) algorithm. Accurate NURBS interpolation of the points generates TechArt CAD models. Performance of the developed system has been confirmed through the quick turnaround 2.5D engraving simulation linked with the commercial CAD/CAM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.12C
• /
• pp.1004-1009
• /
• 2010

ost digital cameras use single sensor array with color filter array to reduce size and cost. However images taken by single sensor array have only one color component per pixel, to obtain a color image missing two color components need to be reconstructed. This reconstructing process is called as demosaicking. This paper propose a new directional demosaicking method and proposed method achieves better image quality with enhanced weighting function. With comparing objective and subjective performance, we show proposed method achieves better performance than the conventional methods.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.23 no.1
• /
• pp.101-113
• /
• 1986

In this paper, a real-time pitch detector LPC vocoder as implemented on a high speed digital signal processor, NEC 7720, is described. The pitch detector was based mainly on the SIFT algorithm. The SIFT pitch detector consists primarily of a digital low pass filter, inverse filter, computation of autocorrelation, a peak picker, interpolation, V/UV defcision and a final pitch smoother. In our approach, modification, mainly on the V/UV decision and a final pitch smoother, was made to estimate more accurate pitches. An 16-bit fixed-point aithmatic was employed for all necessary computation and the simulated results were compared with the eye detected pitches obtained from real speech data. The pitch detector occupies 98.8% of the instruction ROM, 37% of the data ROM, and 94% of internal RAM and takes 15.2ms to estimate a pitch when an analysis frame is consisted of 128 sampled speech data. It is observed that the tested results were well agreed with the computer simulation results.

• Journal of Broadcast Engineering
• /
• v.20 no.2
• /
• pp.265-272
• /
• 2015

A new technology on video frame rate up-conversion (FRUC) is presented by combining the median filter and motion estimation (ME) with an occlusion detection (OD) method. First, ME is performed to have a motion vector. Then, the OD method is used to refine motion vector in the occlusion region. Since the wrong motion vector can be obtained with high possibility in the occluded area, a median filtering that less depends on the motion vector is applied to that area, and since the motion vector is continuous and robust in the non-occluded area, BDMC(Bi-Directional Motion Compensated interpolation) is applied to obtain interpolated image in that area. BDMC using the bi-directional motion vectors achieves good results when continuity and robustness of the motion vector is higher. Experimental results show that the proposed algorithm provides better performance than the conventional approach. The average gain of PSNR (Peak Signal to Noise Ratio) is approximately 0.16 dB in the test sequences compared with BDMC.