• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.993-997
• /
• 2004

A data error inspection algorithm for wireless digital data communication was developed. Original data converted By wireless digital data error inspection algorithm. Wireless digital data is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error inspection algorithm in order to decrease the data distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error inspection algorithm for error check of transmission data. This study is also that investigation and search for error inspection algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro processing the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which is open to public touse free within the limited power.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.30-39
• /
• 2023

Large dams, which are critical infrastructures for disaster prevention, are exposed to various risks such as aging, floods, and earthquakes. Better dam safety inspection and diagnosis using digital transformation technologies are needed. Traditional visual inspection methods by human inspectors have several limitations, including many inaccessible areas, danger of working at heights, and know-how based subjective inspections. In this study, drone photogrammetry was performed on two large dams to evaluate the applicability of digital data-based dam safety inspection and propose a data management methodology for continuous use. High-quality 3D digital models with GSD (ground sampling distance) within 2.5 cm/pixel were generated by flat double grid missions and manual photography methods, despite reservoir water surface and electromagnetic interferences, and severe altitude differences ranging from 42 m to 99.9 m of dam heights. Geometry profiles of the as-built conditions were easily extracted from the generated 3D mesh models, orthomosaic images, and digital surface models. The effectiveness of monitoring dam deformation by photogrammetry was confirmed. Cracks and deterioration of dam concrete structures, such as spillways and intake towers, were detected and visualized efficiently using the digital 3D models. This can be used for safe inspection of inaccessible areas and avoiding risky tasks at heights. Furthermore, a methodology for mapping the inspection result onto the 3D digital model and structuring a relational database for managing deterioration information history was proposed. As a result of measuring the labor and time required for safety inspection at the SYG Dam spillway, the drone photogrammetry method was found to have a 48% productivity improvement effect compared to the conventional manpower visual inspection method. The drone photogrammetry-based dam safety inspection is considered very effective in improving work productivity and data reliability.

• Spatial Information Research
• /
• v.8 no.1
• /
• pp.31-50
• /
• 2000

In establishing the NGIS (The National Geographic Information System) , the Korean Government has been computerizing maps such as topographical maps as well as thematic maps. If the digital maps are mapped according to their use purpose, they can be efficiently used. The goals of this study is to describes the reasonable inspection process of digital maps. For these goals, quality controls and test processes of digital maps are investigated and then the error types of digital maps are analyzed. Nine standards which are data lineage, data format, positional accuracy, attribute accuracy, topology, logical consistency, edge-matching , completeness, outline range are established and nine steps, multi steps, which are making a work plan, analysing error types of digital maps, inspection with the naked eyes, a computerized inspection , a automatic inspection, the judge of results, the analysis of results are proposed.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.3
• /
• pp.12-18
• /
• 2020

In semiconductor manufacturing, defect detection is critical to maintain high yield. Currently, computer vision systems used in semiconductor photo lithography still have adopt to digital image processing algorithm, which often occur inspection faults due to sensitivity to external environment. Thus, we intend to handle this problem by means of using Mask R-CNN instead of digital image processing algorithm. Additionally, Mask R-CNN can be trained with image dataset pre-processed by means of the specific designed digital image filter to extract the enhanced feature map of Convolutional Neural Network (CNN). Our approach converged advantage of digital image processing and instance segmentation with deep learning yields more efficient semiconductor photo lithography inspection system than conventional system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.561-562
• /
• 2009

The needs for inspection automation for more systematic and efficient maintenance were gradually increased by several inspectors and researchers. With the robotic and digital image processing technologies, in this paper, new inspection automation system were introduced and tested in the real PSC box crack inspection procedures The configuration and scheme of robotic inspection and digital image processing algorithms were represented. The designed robotic sensors and image processing system were tested and the feasibility and possibility of the robot based automatic inspection were approved in the real PSC box bridges.

• Korean Journal of Computational Design and Engineering
• /
• v.22 no.1
• /
• pp.44-58
• /
• 2017

The inspection for building occupancy authorization has lacked objectivity due to manual measurement methods. This is why connivance of the illegal buildings has been rampant, which has led to so many incidents. Consequently, this law has lost its intent to protect people's lives and property. In this study, for the purpose of improvement of this law, the research was conducted by the utilization of unmanned aerial vehicle for automated inspection for building occupancy authorization. Theoretical considerations about building occupancy authorization and the trend of UAV technology were accomplished. Secondly, a series of reverse engineering was conducted including digital photography, network RTK-VRS surveying and post-processing data. Thirdly, the resultant spatial information was used for building occupancy inspection authorization in a BIM platform and the effectiveness and applicability of UAV-based inspection was analyzed. As a result, methodology for UAV-based automated building occupancy inspection authorization was derived. And it was found that eleven items would be possible to be automated among thirty total items for building occupancy authorization. Also it was found that UAV-based automated inspection could be valid in inspecting building occupancy authorization due to authentic accuracy, effectiveness and applicability with government policy.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.1
• /
• pp.99-105
• /
• 2009

Recently the research is much interested in about the inspection system using by computer vision system. In this paper, we deal with shape inspection technique for moving to be long and narrow object on conveyor belt. first, we are acquired for moving object on conveyor belt. then the object segmentation is using by color information for background and object. the object position be calculated by horizontal and a vertical histogram. second, we are checked for two hole in front part, widths and top/bottom side information in middle part, and finally checking for two holes in rear part. The performance of our proposed model is evaluated by experiments, within error of 1㎜, and can be checking to 17 object /min.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1734-1735
• /
• 2011

In case of inspection on aluminum castings, traditional RT (Radiographic Testing) method have been utilized for its advantages in interpretation, cost and perpetual storage. But it has disadvantages like time consumption in film processing, low efficiency in storage and environmental pollution. In this thesis, a DRS (Digital Radiography System) utilizing X-Ray TDI Camera (Time Delay and Integration Camera) is developed. Inspections on aluminum castings are performed using the developed Digital Radiography System, DRS and reviewed if newly developed system can substitute for the traditional method.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.375-376
• /
• 2023

In this study, the legal and institutional status of construction supervising and construction inspector was identified. As a result of examining the definitions of construction supervision terms, focusing on domestic construction-related laws, it was found that there were no consistency between each laws regarding 'terminology' and 'definitions'. In addition, the scope of construction inspector's work continues to expand through the delegation provisions to lower statutes, however, responsibility, authority, and inspection cost are not taken into account properly. In addition in order to introduce digital technology to the smart construction site, which is currently active under way, it is judged that the law and institutional contents need to be improved further.