• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2375-2381
• /
• 2014

In case the coefficient set of an FIR filter is represented in the canonic signed digit (CSD) format with a few nonzero digits, it is possible to implement high data rate digital filters with low hardware cost. Designing an FIR filter with CSD format coefficients, whose number of nonzero signed digits is minimal, is equivalent to finding sparse nonzero signed digits in the coefficient set of the filter which satisfies the target frequency response with minimal maximum error. In this paper, a compressive sensing based CSD coefficient FIR filter design algorithm is proposed for multiplierless and high speed implementation. Design examples show that multiplierless FIR filters can be designed using less than two additions per tap on average with approximate frequency response to the target, which are suitable for high speed filtering applications.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1833-1839
• /
• 2014

In this paper, a systematic demapping algorithm for three-dimensional (3-D) lattice signal constellations is presented. The algorithm consists of decision of an octant, computation of a distance from the origin, and determination of the coordinates of a symbol. Since the algorithm can be extended systematically, it is applicable to the larger lattice constellations. To verify the algorithm, 3-D signal transmission systems with field programmable gate array (FPGA) and $Matlab^{(R)}$ are implemented. And they are exploited to carry out computer simulation. As a result, both hardware and software based systems produce almost the same symbol error rates (SERs) in an additive white Gaussian noise (AWGN) environment. In addition, the hardware based system implemented with an FPGA generates waveforms of 3-D signals and recovers the original binary sequences perfectly. Those results confirm that the algorithm and the implemented 3-D transmission system operate correctly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.11
• /
• pp.2021-2026
• /
• 2016

In this paper, a system model for transmission of 3-dimensional (3-D) signals is presented and its performance is analyzed. Unlike 2-D signals, no quadrature form expression for the 3-D signals is available. Exploiting a set of orthogonal basis functions, the 3-D signals are transmitted. As a result of computer simulation using very higher-level signal constellations, the 3-D transmission system has significantly improved error performance as compared with the 2-D system. It is considered that the principal reason for such performance improvement is much increased minimum Euclidean distance (MED) of the 3-D lattice constellations compared with the corresponding 2-D ones. When the MEDs of 2-D and 3-D lattice constellation are compared to confirm the analysis, the MED of 3-D 1024-ary constellation is around 2.6 times larger than that of the quadrature amplitude modulation (QAM). Expanding the constellation size to 4096, the MED of 3-D lattice constellation is increased by 3.2 times of the QAM.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1378-1387
• /
• 2013

Histogram equalization, which stretches the dynamic range of intensity, is the most common method for enhancing the contrast of image. Contrast limited adaptive histogram equalization(CLAHE), proposed by K. Zuierveld, has two key parameters: block size and clip limit. These parameters mainly control image quality, but have been heuristically determined by user. In this paper, we propose a novel method of determining two parameters of CLAHE using entropy of image. The key idea is based on the characteristics of entropy curves: clip limit vs entropy and block size vs entropy. Clip limit and block size are determined at the point with maximum curvature on entropy curve. Experimental results show that the proposed method improves images with very low contrast.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.371-372
• /
• 2005

Supercapacitors are promising devices for delivering high power density. Digital communications, electric vehicles and other devices that require electrical energy at high power levels in relatively short pulses have prompted considerable research on supercapacitors. In recent years, solid electrolytes have been investigated for supercapacitors. Solid electrolytes are advantageous over liquid electrolytes in respect of easy handling and reliability without electrolyte leakage. In this preliminary study, an electrochemical supercapacitor in all solid configuration has been fabricated using CNF-DAAQ and poly-vinylidenefluoride(PVdF). A new type of Supercapacitor was constructed by using carbon nanofibers(CNFs) and DAAQ(l,5-diaminoanthraquinone) monomer. DAAQ was deposited on the carbon nanofibers by chemical polymerization with $(NH_4)_2S_2O_8$ as oxidant in the 0.1M $H_2SO_4$. Dried SPEEK powder was mixed with N-methyl pyrrolidone to make 10 wt.% solution in an ultrasonic bath, the slurry was cast over a glass substrate heated to $70^{\circ}C$ for solvent evaporation. And then we used solid electrolyte of SPEEK. The unit cell consist of DAAQ-CNF/electrolyte/Pt. From the analysis, it is clear that surface of carbon nanofibers was quite uniformly coated with DAAQ. The performance characteristics of the supercapacitors have been evaluated using Cyclic Voltammetry.

• Journal of radiological science and technology
• /
• v.41 no.1
• /
• pp.61-66
• /
• 2018

The recent 3D printing technology is used in various medical, manufacturing, and education fields and is more efficient in terms of production process, time, and cost than existing production. Especially in fracture surgery, interest and research have been focused on improving accuracy, shortening of operation time and recovery time, and reducing reoperation. However, because of the financial and technical problems of the 3D printer and the file conversion program, the 3D printing is made directly at the hospital, and it is not generally used for diagnosis of fracture and surgical research. In this study, to solve those problems, clavicle CT imaging was switched into Osirix Open Source DICOM Viewer, Stereolithography file conversion programs and commercial Terarecon 3D DICOM Viewer, file conversion programs, and then clavicle fracture model was directly made through 3D printer of fused filament fabrication wire additive processing method, and then the accuracy of the shape was compared and analyzed. Clavicle fracture models printed in two methods were blind-tested on clinicians of general hospitals' orthopedics and radiologic technicians with over 10 years of experiences, and then their analysis opinions of resolution reviews were analyzed. The result showed no difference. The 3D printing model with open source DICOM STL file conversion program used was applicable to clinical, so it is considered useful in precision diagnosis of fracture and operation plans.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5C
• /
• pp.454-463
• /
• 2010

After the efficiency of H.264 video compression has been announced, it replaced MPEG-2 standard in several applications. So transcoding methods of MPEG-2 to H.264 have been studying because there are variety devices and contents followed by MPEG-2. Although H.264 supported various service such as IPTV, DMB, digital broadcasting etc, but users using MPEG-2 devices cannot accessible to them. This paper propose H.264 to MPEG-2 transcoding for users of MPEG-2 devices without displacement H.264. The proposed method predicted a motion vector for MPEG-2 encoder after it extracted from motion vectors of variable blocks in H.264 to improve processing time. Also it predicted a optimal motion vector using modified boundary matching algorithm after grasped a special character for boundary and background of object. The experimental results from proposed method show a considerable reduction in processing time, as much as 68% averagely, with a small objective quality reduction in PSNR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.164-171
• /
• 2008

Adaptive equalizers are inevitable schemes in digital communication systems for compensating the transmission channel distortion. Additionally, to obtain the required BER(Bit Error Rate), the adaptive algorithms appropriate to the mobile communication channels are required. In this paper, we propose the NPDFE (Noise-Predictive Decision Feedback Equalizer) for communication systems performance improvement in mobile communication channels. The performance of the proposed NPDFE with QPSK (Quadrature Phase Shift Keying) is simulated under AWGN (Additive White Gaussian Noise), Ricean fading, ETSI (European Telecommunications Standards Institute) fading, and Rayleigh fading channels. The equalizers used in simulations are a LE (Linear Equalizer), a DFE (Decision Feedback Equalizer), and a NPDFE. Moreover, the equalizer performance criterion of the QPSK is the BER.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.290-305
• /
• 2019

As laws regarding the execution of governmental and public corporate advertising have been enforced since 2018, the need for the increase in effectiveness and public benefits of governmental advertising has been suggested. This research focuses on the government's health campaigns regarding well-being, hygiene, and safety and thus conducts an in-depth research into strategies and the future course of policies. First, it analyzes domestic/international governmental advertising in the realm of health campaigns and specifically studies governmental advertising that employs media technologies in health communications. Furthermore, through in-depth interview with 10 health campaign experts, the study explores possible plans of utilizing the ever-developing field of digital technology. The results of this research show that it is imperative to target and strategize according to the purposes of health campaigns. It is also important to set the appropriate parameters of the campaigns according to the given budget while securing the quantity and quality of creativity. Also, it will be crucial to utilize media technology to the fullest extent and strategize around it. Therefore, this research suggests theoretical as well as practical strategic plans to increase the effectiveness and efficiency of governmental advertising in the realm of well-being, hygiene, and safety in health campaigns.

• Journal of the Korea Convergence Society
• /
• v.10 no.11
• /
• pp.173-179
• /
• 2019

DICOM(Digital Imaging and Communications in Medicine) imaging plays a significant role in the diagnosis and treatment of the human body, and design modeling is a technology of planning shapes in three dimensions according to the purpose. In this study, we converge these two technologies to observe the relationships of the cross-section, volume, and surface area to the morphological changes of the external ear canal. The experiment applied medical imaging technologies to acquire sections of the human body to create and divide centerlines using 3D shapes extracted from 19 external ear canals by applying stereolithography and 3-matic program. The results showed that the cross-sectional structure of the external ear canal had various shapes, such as oval (38.5%), semicircular (28.2%), mixed (17.9%), square (10.2%), and wrinkled (5.1%). In addition, the cross-sectional area of each phase increased as the length of the external ear canal increased, and the volume and surface area decreased towards the direction of the eardrum. However, the surface area reduction rate was relatively low. This indicates that the structure becomes irregular towards the direction of the eardrum.