• Journal of Electrical Engineering and Technology
• /
• v.9 no.4
• /
• pp.1145-1153
• /
• 2014

It is well known that line switching operations like reclosing are able to cause transient power oscillations which can stress or damage turbine generators. This paper presents a reclosing scheme to reduce the shaft torsional torques of turbine generators by inserting an additional reactor. A novel method to determine optimal reactor capacity to minimize the torsional torque generated in a turbine generator is also proposed. In this paper, the turbine generator shaft is represented by a multi-mass model to measure torsional torques generated in the shaft between the turbine and the generator. Transmission systems based on actual data from Korea are modeled to verify the proposed scheme using ElectroMagnetic Transient Program (EMTP) software. The simulation results clearly show the effectiveness of the proposed scheme and torsional torque can be minimized by applying the proposed scheme.

• The Journal of the Korea Contents Association
• /
• v.17 no.3
• /
• pp.589-595
• /
• 2017

We present an estimation model for optimal channel capacity required to data traffic transmission. The optimal channel capacity should be calculated in order to satisfy the permitted transmission delay of each wireless data services. Considering the discrete-time operation of digital communication systems and batch arrival of packet-switched traffic for various wireless services, $Geo^x$/G/1 non-preemptive priority queueing model is analyzed. Based on the heuristic interpretation of the mean waiting time, the mean waiting times of various data packets which have the service priority. Using the mean waiting times of service classes, we propose the procedure of determining the optimal channel capacity to satisfy the quality of service requirement of the mean delay of wireless services. We look forward to applying our results to improvement in wireless data services and economic operation of the network facilities.

• The KIPS Transactions:PartB
• /
• v.17B no.4
• /
• pp.275-286
• /
• 2010

Reversible watermarking which can preserve the original quality of the digital contents and protect the copyright has been studied actively. Especially, in medical, military, and art fields, the need for reversible watermarking is increasing. This paper proposes a high-capacity reversible watermarking through predicted error expansion and error estimation compensation. Watermark is embedded by expanding the difference histogram between the original value and the predicted value. Differently from previous methods calculating the difference between adjacent pixels, the presented method calculates the difference between the original value and the predicted value, and that increases the number of the histogram value, where the watermark is embedded. As a result, the high capacity is achieved. The inserted watermark is extracted by restoring the histogram between the original value and the predicted value. To prove the performance, the presented algorithm is compared with other previous methods on various test images. The result supports that the presented algorithm has a perfect reversibility, a high image quality, and a high capacity.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.131-137
• /
• 2017

In order to safely protect high over current flowing into the main circuit at short-circuit without any explosion or fire, the enclosed cartridge fuse with a high interrupting capacity should be applied. But this fuse is impossible to be applied to an inner electronic circuit because of a limited space problem result from the miniaturization trend of products. Therefore, it is necessary to apply a sub-miniature fuse with a relatively small size. However the semi-enclosed fuse which is more free for an influx of air than the enclosed cartridge fuse and is possible to protect fuse elements with chemical and physical combination can be adoptable. But it has a limit of implementing the characteristic of a high breaking capacity. For these reasons, the Fe-42wt％Ni fuse elements alloy and fuse-link with less space were designed to increase a breaking capacity of sub-miniature fuse and its safety for fire and explosion was confirmed in this paper.

• Journal of the Korean Society of Physical Medicine
• /
• v.17 no.3
• /
• pp.79-86
• /
• 2022

PURPOSE: By virtue of its location, the iliopsoas muscle has the potential to affect the function of the diaphragm. Therefore, the purpose of this study was to investigate the effects of passive stretching of the iliopsoas muscles on pulmonary function. METHODS: Twenty male university students participated in this study. Subjects with low back pain, negative results on the modified Thomas test, and chest breathing patterns not directly related to the function of the iliopsoas muscles were excluded from this study. A digital pulmonary function measuring device (Pony FX, COSMED Inc, Italy) was used to test pulmonary function. The test was performed three times: the first test before passive stretching, the second test 10 minutes after the first test, and the third after passive stretching. Passive stretching was performed 5 times for each of the left and right iliopsoas muscles. Passive stretching was carried out for 20 seconds followed by a 10-second break. The SPSSWIN (ver. 27.0) statistics program was used for data analysis, and the significance level was α =.05. RESULTS: Among slow vital capacity (SVC) parameters, tidal volume (VT), inspiratory reserve volume (IRV), inspiratory capacity (IC) and vital capacity (VC) improved significantly after passive stretching. Also, among the maximal effort vital capacity (MEVC) parameters, forced vital capacity(FVC) and forced expiratory volume in one second(FEV1) improved significantly after passive stretching. CONCLUSION: The results showed that among the various pulmonary function parameters measured, passive stretching of the iliopsoas muscles can improve the SVC and MEVC. Therefore, passive stretching of the iliopsoas muscles may be considered for use as a treatment method to improve pulmonary function.

• Structural Engineering and Mechanics
• /
• v.86 no.3
• /
• pp.385-397
• /
• 2023

This study presents an experiment and analysis to compare the seismic behavior of full-scale reinforced concrete beam-column joint strengthened by prestressed steel strips, externally bonded steel plate, and CFRP sheets. For experimental investigation, five specimens, including one joint without any retrofitting, one joint retrofitted by externally bonded steel plate, one joint retrofitted by CFRP sheets, and two joints retrofitted by prestressed steel strips, were tested under cyclic-reserve loading. The failure mode, strain response, shear deformation, hysteresis behavior, energy dissipation capacity, stiffness degradation and damage indexes of all specimens were analyzed according to experimental study. It was found that prestressed steel strips, steel plate and CFRP sheets improved shear resistance, energy dissipation capacity, stiffness degradation behavior and reduced the shear deformation of the joint core area, as well as changed the failure pattern of the specimen, which led to the failure mode changed from the combination of flexural failure of beams and shear failure of joints core to the flexural failure of beams. In addition, the beam-column joint retrofitted by steel plate exhibited a high bearing capacity, energy consumption capacity and low damage index compared with the joint strengthened by prestressed steel strip, and the prestressed steel strips reinforced joint showed a high strength, energy dissipation capacity and low shear deformation, stirrups strains and damage index compared to the CFRP reinforced joint, which indicated that the frame joints strengthened with steel plate exhibited the most excellent seismic behavior, followed by the prestressed steel strips.

• Journal of Digital Convergence
• /
• v.16 no.4
• /
• pp.23-28
• /
• 2018

In recent years, activities have become more important in political activities and participation in policies. Therefore, the level of digital informatization can affect the participation in policy in the online environment. In this study, we examined how the policy activities of the disabled have a relationship with the informatization level. To this end, we analyzed the relationship between the level of digital informatization and the level of satisfaction with policy activities based on the results of the digital divide survey of 2017. The results of this study are as follows: First, it shows that the disabled people have a positive relationship with the digital access and policy activity satisfaction levels such as the possession of wired / wireless information devices and Internet accessibility. Second, it is found that digital information capacity level and income level such as PC utilization ability and mobile digital device utilization ability have a positive (+) relationship. Third, as the level of digital information utilization such as wired and mobile Internet usage increased, the level of satisfaction with policy activities also increased positively. This suggests that the government needs various information policy to increase the level of digital informatization of the disabled.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2003-2008
• /
• 2012

A drive system is necessary to operate LED by an LED illumination system. Because Switched Mode Power Supply (SMPS) is higher in efficiency in the large capacity than Linear Regulator, it is used mainly and controls this in an analog form or digital method. A MCU and a DSP of the digital control central processing unit were higher in a unit price than existing analog control chip, so that an approach was not easy for application of SMPS. But it can take the earnings by it lets you integrate various digital control features like an LED illumination system in one MCU, and realizing a whole system. In this paper, we suggest the algorithm that can improve LED driving current in applying such a digital control method using low-priced type MCU.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.4923-4939
• /
• 2019

In this paper, a secure transmission scheme based on the artificial noise is proposed for D2D communications underlaying the full-duplex cellular network, and a secure power allocation scheme to maximize the overall secrecy rate of both the cellular user and D2D transmitter node is presented. Firstly, the full-duplex base station transmits the artificial noise to guarantee the secure communications when it receives signals of cellular uplinks. Under this secure framework, it is found that improving the transmission power of the cellular user or the D2D transmitter node will degrade the secrecy rate of the other, although will improve itself secrecy rate obviously. Hence, a secure power allocation scheme to maximize the overall secrecy rate is presented subject to the security requirement of the cellular user. However, the original power optimization problem is non-convex. To efficiently solve it, we recast the original problem into a convex program problem by utilizing the proper relaxation and the successive convex approximation algorithm. Simulation results evaluate the effectiveness of the proposed scheme.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.121-130
• /
• 2022

Recently, as soldiers are allowed to use mobile phones, cases are frequently transferred from the police to the military due to criminal acts, and digital evidence is collected separately from the reliability of previous investigations, such as overlapping seizure and search procedures. In this study, through in-depth interviews with practitioners in charge of digital evidence in the military, police, and courts, problems related to digital evidence handling, such as infringement of evidence ability due to overlapping human factors and procedures, are derived and analyzed. The presented procedure verified the effectiveness of the procedure through case analysis, and is expected to contribute to the guarantee of the evidence capacity of digital evidence and the efficiency of handling cases.