• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.981-986
• /
• 1992

In order to implement the digital PID control algorithm, it is necessary to consider the effect of the finite word length(FWL). In this paper, we show the FWL effect in the digital PID controllers. The conception analyse the effects of the signal quantization error in the digital PID algorithm and the coefficient wordlength determined from performance criteria with the statistical wordlength concept. Throughout this paper, it is dealt with the type of controller structure based delta operator the delta operator has such advantages are superior rounfoff noise perfoff noise performance, more accurate coefficient repersentation, and less sensitive control law.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.109-109
• /
• 2000

In process industries, more than 90% of the control loops have PID controller. Futhermore, the most control systems are using classical PID controllers for their process control. Various auto-tuning methods of PID gains using relay-feedback are presented recently. In order to get the desired control performance, the correct tuning of PID controller is very important. This paper suggests how to tune of digital PID gains using information for both the Nyquist critical point by conventional method and another point by the relay feedback and hidden time-delay term. Simulation results show that the proposed controller has better performance than the conventional method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.311-316
• /
• 1991

This paper deals with designing the PID autotuner. The system parameters are identified using the relay control, where the unidirectional relay with hysteresis is adopted. The digital PID tuning rule on Nyquist plot is derived, and the statistical wordlength is adopted for the coefficient wordlength. The experimental results of temperature control exhibit the satisfactory performance and the validity of the derived statistical wordlength.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 추계학술대회
• /
• pp.246-247
• /
• 2015

자동전압조정장치(AVR)의 종류는 Analog Type과 Digital Type으로 나눌 수 있다. 브러쉬리스형의 동기발전기의 자동전압조정장치는 전 부하에 대하여 전압변동을 작게 하여야 한다. 일반적인 제어기법으로는 PID 제어방식이 일반적으로 많이 사용되고 있다. 본 연구에서는 제어대상의 파라미터변동에 대하여 제어기의 파라미터를 재설정 하지 않는 iPID(intelligent PID:지적 PID)제어기를 이용하여 동기발전기 Digital 자동전압조정장치(AVR)에 적용하여 전부하시에도 전압변동이 작고, 속응성이 향상된 제어기를 연구 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1012-1015
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. The adjust parameter of PID to achieve best response of process which be using time and may be error if user are not expert. Nowadays this problem was solved by develop PID controller which can analysis and auto tune parameter are appropriate with process which used principle of Ziegler ? Nichols but it are expensive and designed for each task. Thus, this paper proposes auto tune PID based on FPGA by use principle of Dahlin which maximum overshoot not over 5 percentages and do not fine tuning again. It have performance in control process are neighboring controller in industrial and simple to use. Especially, It can use various process and low price. The auto tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. It was verified by control model of temperature control system.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.68-68
• /
• 2000

This paper presents a fuzzy modified PID controller that uses linear fuzzy inference method. In this structure, the proportional and derivative gains vary with the output of the system under control. 2-input PD type fuzzy controller is designed to obtain the varying gains. The proposed fuzzy PID structure maintains the same performance as the general-purpose linear PID controller, and enhances the tracking performance over a wide range of input. Numerical simulations and experimental results show the effectiveness of the fuzzy PID controller in comparison with the conventional PID controller.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.35-41
• /
• 2000

This paper describes the design of fuzzy digital PID controller using a simplified indirect inference method. First, the fuzzy digital PID controller is derived from the conventional continuous-time linear digital PID controller,. Then the fuzzification, control-rule base, and defuzzification using SIM in the design of the fuzzy controller are discussed in detail. The resulting controller is a discrete-time fuzzy version of the conventional PID controller, which has the same linear structure, but are nonlinear functions of the input signals. The proposed controller enhances the self-tuning control capability, particularly when the process to be controlled is nonlinear. When the SIIM is applied the fuzzy inference results can be calculated with splitting fuzzy variables into each action component and are determined as the functional form of corresponding variables. So the proposed method has the capability of the high speed inference and adapting with increasing the number of the fuzzy input variables easily. Computer simulation results have demonstrated that the proposed method provides better control performance than the one proposed by D. Misir et al.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 하계학술발표회 논문집
• /
• pp.185-186
• /
• 2008

In this paper, the nano-grating was measured by Scanning Probe Microscopy (SPM) system using digital Proportion, Integration and Derivative (PID) control. Through this measurement, we could confirm the improvement of the vertical resolution compared with analog Proportion and Integration (PI) control method.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2212-2220
• /
• 2016

Based on the conventional PID algorithm and the adaptive PID (AD-PID) algorithm, a separate sampling adaptive PID (SSA-PID) algorithm is proposed to improve the transient response of digitally controlled DC-DC converters. The SSA-PID algorithm, which can be divided into an oversampled adaptive P (AD-P) control and an adaptive ID (AD-ID) control, adopts a higher sampling frequency for AD-P control and a conventional sampling frequency for AD-ID control. In addition, it can also adaptively adjust the PID parameters (i.e. $K_p$, $K_i$ and $K_d$) based on the system state. Simulation results show that the proposed algorithm has better line transient and load transient responses than the conventional PID and AD-PID algorithms. Compared with the conventional PID and AD-PID algorithms, the experimental results based on a FPGA indicate that the recovery time of the SSA-PID algorithm is reduced by 80% and 67% separately, and that overshoot is decreased by 33% and 12% for a 700mA load step. Moreover, the SSA-PID algorithm can achieve zero overshoot during startup.