• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.53-58
• /
• 1986

This paper represent the design of a digital modem which transmits the ECG data from an ambulatory arrhythmia monitor over the telephone lines to a large hospital for the instantaneous interpretations. The digital modem provides on-line communications between the patient and the central computer located near cardiologists. For commercial telephone lines, the transmitting error rates of the digital modem were measured 200 times at a speed of 300 baud. In those measurements, the block errors-results, due to the misinterpretation of start and stop bits, did not occur, The data bit errors which were due to a single bit interpreted incorrectly were 0.78 (bits/10 ) . Since the acceptable data bit error limit is 10 per 106 bits transmitted, the digital modem designed in this paper can be used for the clinical applications without any difficulty.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.73-76
• /
• 2000

In tendency of digitalization, we studied about the purpose of digital modem for MRI spectrometer and advantage of digital modem compared with analog one. We introduce requirements lot designing transmitter of high speed digital modem for MRl spectrometer We also introduce its top-level and mid-level architecture. The transmitter is composed of CPC-P interface block, DUC & DAC block, RF block, master clock generation block, MCU block. Especially, DUC and its control parts are studied in detail. DUC and DAC can operate up to 52MHz and 100Msps, respectively. However we uses 35MHz as master clock and this paper shows its validity through simulations.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1777-1786
• /
• 1996

This paper describes theories and implementation techniques of a digital high-definition television(HDTV) modem based on 32-QAM for terrestrial broadcasting. We proposed a digital demodulation scheme and a symbol timing recovery structure based on the band edge component maximization(BECM) method. The adaptive equalizer has 256 complex taps to remove the multipath of delays ranging from -2.mu.s~+24.mu.s with a new T/2-spaced blind equalization algorithm. computer simulation results reveal that the proposed algorithm outperforms other conventional blind equalization algorithm a digital HDTV modem with 4.91MHz symobol rate is implemented by utilizing the proposed algorithms. All processings for modem operations such as demodulation, estimation of symbol timing phase error, adaptive equalization, and carrier recovery except IF signal processing and sampling phase control part of the AD converter are done in digital domain. Especially, the carrier recovery loop can track a carrier offset of upto .+-.350KHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.624-632
• /
• 1994

In this paper, we implement modulator of 155Mbps 64QAM RF MODEM, CCITT G. 707 SDH(Synchronous Digital Hierachy) 1 level, for DMR(DIgital Microwave Radio) STM-1 transmission, PSF(Pulse Shaping Filter) plays an important role to analyze modulator. We use 7 orders elliptic filter instead of Chebychev filter(roll-off facter a=0.5)in this paper. we obtain that roll-off factor, a is 0.33, group delay is less than 10nsec using this filter. Also we get -20dBm output level after passing the PSF, and 0dBm output level after passing the IF amplifier.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.1-13
• /
• 1995

In this paper, a specification for wireless LAN MODEM using direct sequence spread spectrum (DS/SS) technique is presented. Some algorithms and hardware architectures for an efficient implementation of the DS/SS MODEM are suggested. In the method, all baseband signal processing are done digitally for single chip implementation. Schemes of DQPSK baseband modulation/demodulation, despreading with digital matched filter, digital timing recovery, and efficient carrier sensing are among the discussed algorithms. We also performed various kinds of simulations to evaluate the system performance and to extract parameters for hardware implementation. In addition, the pictorial view of ASIC of the SS MODEM is also shown.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.275-281
• /
• 2014

Recently, the need for various underwater application systems targeting efficient resource exploration and aquatic ecosystem monitoring is rapidly increasing in littoral sea and inland waters. In this paper, we focus on the research and development of digital module of acoustic micro modem which can be used for underwater mobile communication systems and underwater sensor network systems. Specifically, a digital module of acoustic modem embedding digital signal processor is designed and implemented. On top of the developed hardware platform, physical layer frame generation and recovery and channel coding algorithms are mounted and tested in a water tank and a pond to verify its functionality and performance. According to experimental results, less than 1 percent of total computational power is consumed in the processing of frame control and convolutional code with the data rate of 1 kbps. Thus, the performance of micro modem could be improved by loading efficient baseband algorithms into the processor while maintaining the implemented hardware.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.385-391
• /
• 2007

In this paper, we propose a frequency synchronization algorithm for S-DMT cable modem, which is practicable to the next-generation high capacity upstream physical layer in HFC networks. Analyzing several viable frequency synchronization algorithms of multicarrier systems, we proposed an algorithm using predetermined training sequence of repeated pattern in preamble field and residual frequency offset compensation with pilot signals. We verified that the simulation results of the proposed algorithm in AWGN showed good performance and suitability to the S-DMT upstream cable modem for fast frequency synchronization.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1346-1349
• /
• 2002

This paper presents the design and implementation of 16-QAM modem that can be applied to fixed broadband wireless access systenm. It is implemented in the hardware prototype that consist of FPGA(Field Programmable Gate Array) for digital signal processing and analog front end module for analog signal processing. We provide 20.48Mbps data rate using implemented modem and test the modem in KOREA 26㎓ broadband wireless local loop system including IFU(Intermediate Frequency Unit) and RFU(Radio Frequency Unit) via air interface.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.113.3-113
• /
• 2001

In this paper, we have designed the VHDL module of DS/SS QPSK wireless modem processor for digital data communication. The spread spectrum method is used for modern processor, because this method guarantees good frequency efficiency and higher security. Also, it guarantees good performance in digital communication system under multi-path interferences. The differential encoder and decoder are used for simple circuit composition in the signal detection. For the synchronization of receiver, matched filter and power detector are used. And the IF modulation/demodulation of QPSK method is used in the digital level. The transmitter of VHDL modem processor consists of differential encoder, PN code generator, and QPSK ...

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.21-34
• /
• 1986

In this paper, we described the ECG telemetry system via the Public Telephone Line. The system consist of a signal acquisition and measurement section, a signal processing section, and a signal transmission section. It used 8 bits microprocessor. The transmission section is composed of 3 ch. analog modulators and 1 ct. digital modem. Especially, using the digital modem, signal is transmitted with about 50n data reduction ratio by the TP (Turning Point) algorithm. The acoustic coupler or inductive coil for linking the public telephone line are used. The speed of the digital modem is 300 baud rate. The MCBS (Multi Channel Biotelemetry System) is tested and evaluated through the experiment.