• 대한기계학회논문집
• /
• 제17권2호
• /
• pp.467-474
• /
• 1993

Viscous flow and heat transfer phenomena in an axisymmetric cylinder which models a diesel engine have been numerically studied. In order to search for a way to minimize numerical diffusion, the effectiveness and the appropriateness of two selected numerical schemes for convective terms in the governing equations have been tested. They are Linear Upwind Difference Scheme and Hybrid Scheme. Using a standard k-.epsilon. turbulence model, the calculation has been carried out basically up to 180.deg. of crank angle. As a result, it was shown from comparison with previous experimental data that Linear Upwind Difference Scheme is less influenced than Hybrid Scheme by the numerical diffusion and it was suggested that these effects of numerical diffusion can be more significant than those due to turbulence modeling.

• 대한치과보철학회지
• /
• 제30권4호
• /
• pp.481-492
• /
• 1992

Author measured the bonding strength between Dental Porcelain and Nonprecious Dental Alloy and analyzed diffusion Phenomena at the interfaceby by Auger electron spectroscopy and also Electron spectroscopy for Chemical Analysis. The each specimen was sputtered with Al, Cr, In and Sn. 1. Ni whic is the main element of the matris of dental nonprecious alloy diffuse more than the other element and the Ni diffusion rate of each specimen was well coordinated with the bonding strength of each. 2. The Sn thin film suppress the diffusion rate of Ni of matrix into the Dental Porcelain than the In or Cr thin films. 3. The Al thin film suppress the diffusion rate of Ni than the Sn thin film. 4. The main coponent of dental porcelain : Al, Si, Mo diffused into the matrix of alloy. It means that the each element of dental alloy and dental porelain diffused into the each other part.

• Nuclear Engineering and Technology
• /
• 제29권1호
• /
• pp.7-14
• /
• 1997

Grain boundary diffusion plays a significant role in fission gas release, which is one of the crucial processes dominating nuclear fuel performance. Gaseous fission produce such as Xe and Kr generated during nuclear fission have to diffuse in the grain lattice and the boundary inside fuel pellets before they reach the open spaces in a fuel rod. These processes can be studied by 'tracer diffusion' techniques, by which grain boundary diffusivity can be estimated and directly used for low burn-up fission gas release analysis. However, only a few models accounting for the both processes are available and mostly handle them numerically due to mathematical complexity. Also the numerical solution has limitations in a practical use. In this paper, an approximate analytical solution in case of stationary grain boundary in a polycrystalline solid is developed for the tracer diffusion techniques. This closed-form solution is compared to available exact and numerical solutions and it turns out that it makes computation not only greatly easier but also more accurate than previous models. It can be applied to theoretical modelings for low bum-up fission gas release phenomena and experimental analyses as well, especially for PIE (post irradiation examination).

• 천문학회보
• /
• 제45권1호
• /
• pp.70.3-70.3
• /
• 2020

Previous numerical simulations on planet-disk interactions revealed a lot of interesting phenomena including the planetary migration and the formation of many sub-structures inside the disks. However, these simulations were limited to an isothermal or adiabatic equation of state which does not account for various heating and cooling processes in the disks. Recent studies showed that the behavior of the planet-disk interaction can be significantly influenced by the disk thermodynamics. We develop a radiative diffusion module based on the two-temperature flux-limited diffusion approximation accounting for viscous heating and the accretion feedback. In this presentation, we describe our radiative diffusion solver, present some test results, and discuss potential applications of the module to planet-disk interactions,

• 한국항행학회논문지
• /
• 제16권4호
• /
• pp.657-664
• /
• 2012

용질분자를 용매를 통하여 전달시키는 기법중의 하나는 확산에 의한 것이다. 이러한 기전은 각개 용질분자의 열운동에 의한 것이다. 유체는 정지해 있는 상태로서 용질 전달의 핵심기전은 농도차에 의하여 결정된다. 인체 내에서 각종 하전 이온을 포함한 입자나 분자들은 체내의 농도차에 의해서 또는 외부 전계에 의해서 영향을 받아 고농도에서 저농도쪽으로 확산되어간다. 이러한 현상은 픽이 제안한 확산에 관한 제1법칙과 제2법칙에 의하여 정량적으로 전개할 수 있다. 본 논문에서는 체내의 물질이 확산되는 과정을 픽의 법칙을 이용하여 해석하고 그것을 실례를 통하여 구현하였다. 각 시간별 공간상의 확산현상에서 확산계수가 클 때는 시간이 경과함에 따라 발생지점의 농도는 현저히 낮아지고 그 농도가 주위로 급속히 확산되어감을 알 수 있었다. 그러나 어느 정도의 시간이 경과되면 그 농도의 감소는 매우 약해진다.

• Nuclear Engineering and Technology
• /
• 제52권4호
• /
• pp.681-688
• /
• 2020

The telegrapher's theory was used to develop a new formulation for the neutron noise equation. Telegrapher's equation is supposed to demonstrate a more realistic approximation for neutron transport phenomena, especially in comparison to the diffusion theory. The physics behind such equation implies that the signal propagation speed is finite, instead of the infinite as in the case of ordinary diffusion. This paper presents the theory and results of the development of a new method for calculation of the neutron noise using the telegrapher's equation as its basis. In order to investigate the differences and strengths of the new method against the diffusion based neutron noise, a comparison was done between the behaviors of two methods. The neutron noise based on SN transport considered as a precision measuring point. The Green's function technique was used to calculate the neutron noise based on telegrapher's and diffusion methods as well as the transport. The amplitude and phase of Green's function associated with the properties of the medium and frequency of the noise source were obtained and their behavior was compared to the results of the transport. It was observed, the differences in some cases might be considerable. The effective speed of propagation for the noise perturbations were evaluated accordingly, resulting in considerable deviations in some cases.

• Korea-Australia Rheology Journal
• /
• 제18권2호
• /
• pp.51-65
• /
• 2006

Of concern in the present theoretical investigation is the study of blood flow and convection-dominated diffusion processes in a model bifurcated artery under stenotic conditions. The geometry of the bifurcated arterial segment having constrictions in both the parent and its daughter arterial lumen frequently appearing in the diseased arteries causing malfunction of the cardiovascular system, is constructed mathematically with the introduction of suitable curvatures at the lateral junction and the flow divider. The streaming blood contained in the bifurcated artery is treated to be Newtonian. The flow dynamical analysis applies the two-dimensional unsteady incompressible nonlinear Wavier-Stokes equations for Newtonian fluid while the mass transport phenomenon is governed by the convection diffusion equation. The motion of the arterial wall and its effect on local fluid mechanics is, however, not ruled out from the present model. The main objective of this study is to demonstrate the effects of constricted flow characteristics and the wall motion on the wall shear stress, the concentration profile and on the mass transfer. The ultimate numerical solutions of the coupled flow and diffusion processes following a radial coordinate transformation are based on an appropriate finite difference technique which attain appreciable stability in both the flow phenomena and the convection-dominated diffusion processes.

• 한국가스학회지
• /
• 제16권4호
• /
• pp.23-31
• /
• 2012

밀폐 공간 내의 천연가스 공급 시스템에서 가스 누설에 따른 재난을 방지하고 보다 안전한 설계를 하기 위해서는 누출된 천연가스의 확산거동을 이해하고 예측할 수 있는 기술이 필요하다. 본 연구에서는 CFD를 사용한 해석법을 제시하고, 기 수행된 British Gas Technology Co.의 실험결과와 비교하여 타당성을 제시하였다. 노즐에서의 분출유량 2D 해석 결과는 실험결과와 2.6% 이내로 잘 일치함을 보였다. 또한, 다양한 강제 환기 조건에 따른 가스 확산 특성을 비정상상태 3차원 CFD 해석을 수행한 결과 실험결과와 정성적인 경향이 잘 일치됨을 보였다.

• 대한기계학회논문집B
• /
• 제20권10호
• /
• pp.3361-3370
• /
• 1996

Micro-Macro approach is conducted for the mixture solidification to handle the closely linked phenomena of microscopic solute redistribution and macroscopic solidification behavior. For this purpose, present work combines the efficiency of mixture theory for macro part and the capability of microscopic analysis of two-phase model for micro part. The micro part of present study is verified by comparison with experiment of Al-4.9 mass% Cu alloy. The effect of back diffusion on the macroscopic variables such as temperature and liquid concentration, is appreciable. The effect, however, is considerable on the mixture concentration and eutectic fraction which are indices of macro and micro segregation, respectively. According to the diffusion time, the behavior near the cooling wall where relatively rapid solidification permits short solutal diffusion time, approaches Scheil equation limit and inner part approaches lever rule limit.

• 응용통계연구
• /
• 제23권2호
• /
• pp.383-392
• /
• 2010

확산모형은 최근 금융현상의 연구 등에 자주 사용되는 모형이다. 본 연구에서는 확산모형의 추정에서 중요한 역할을 하는 전이확률밀도를 구하는 방법과 이를 급수전개 방식으로 근사하는 기존 연구들을 검토하여 보고, 급수전개법에서의 계수를 손쉽게 구할 수 있는 방법을 고려하게 된다. 급수전개법 계산과정에서 중요한 허밋다항식에 딘킨연산자를 반복적으로 적용하는 과정을 손쉽게 계산할 수 있는 알고리즘을 제안한다.