• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.707-713
• /
• 1996

Changes of sodium chloride content in Chinese cabbage were investigated at different conditions. The diffusion rate of sodium chloride into the cabbage increased with increasing the temperature of brine solution. Sodium chloride content of Chinese cabbage at the lower portion of tank was higher than that at the upper position. The more washing and dewatering, the lower sodium chloride content of the cabbage was found. Microstructure pattern of salted cabbage tissue depended upon height of tank. The changed epidermis cell was recovered after several times of washing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.5 no.1
• /
• pp.9-18
• /
• 1999

To predict the oil spill dispersion phenomena in the ocean, the oil spill response model, which can be used for strategic purpose on the oil spill site, based on Lagrangian particle-tracking method was formulated and applied to the neighboring area with Pusan port where the oil spill incident occurred when the tanker ship No.1 Youil struck on a small rock near the Namhyungjeto on September 21, 1995. The real-time tidal currents to be required as input data of the oil spill model were obtained by the two-dimensional hydrodynamic model and the tide prediction model. Evaluation of tidal currents using observation data was successful. For wind data, other input data of oil spill model, observed data on the spot were used. To verify the oil spill model, the oil spill modelling results were compared with the field data obtained from the spill site. Compared the modelling results with the observation data, there exist some discrepancies but the general pattern of modelling results was similar to that of field observation. The modelling results on 7 days after spill occurred showed that the 40% of spilled oil is in floating, 36% in evaporated, 23% at shore, and 1% in out of boundary, respectively. According to the evaluation of weighting curves of effective components to the dispersion of oil, the winds make a 37% of contribution to the dispersion of oil, turbulent diffusion 39.5%, and tidal currents 23.5%, respectively. Provided the more accurate wind data are supported, more favorable results might be obtained.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.7
• /
• pp.1057-1065
• /
• 2002

The antagonistic activities of 30 strains of lactobacilli against Helicobacter pylori were determined and Lactobacillus helveticus CU631 has been selected as the strain which possesses the strongest inhibitory effect in the disc diffusion assay showing inhibition zone diameter of $10{\pm}1.5mm$, whereas those of L. plantarum and L. fermentum have been shown to be $4.0{\pm}0.6mm$. H. pylori G88016 revealed the highest vacuolating toxin producing activity among the 8 strains, the inhibitory activity of L. helveticus CU631 in vacuolating toxin producing activity of H. pylori manifested in the co-culture of two strains and in the 5:5 mixture of supernatant of the two strains. Both L. helveticus CU631 and cell free culture supernatant had a strong inhibitory activities in urease and cytotoxin producing activities of H. pylori NCTC11637 and CJH12. An accelerated proteolytic activity of water soluble peptides by L. helveticus CU631 during the refrigeration storage has been manifested in the cream cheese. DNA seqences of 16S-23S ribosomal RNA spacer region showed typical pattern among the various strains of L. helveticus, which could be used in the identification of L. helveticus CU 631.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.69-77
• /
• 2016

We propose nano-scale Cu direct bonding technology using ultra-high density Cu nano-pillar (CNP) with for high stacking yield exascale 2.5D/3D integration. We clarified the joining mechanism of nano-scale Cu direct bonding using CNP. Nano-scale Cu pillar easily bond with Cu electrode by re-crystallization of CNP due to the solid phase diffusion and by morphology change of CNP to minimize interfacial energy at relatively lower temperature and pressure compared to conventional micro-scale Cu direct bonding. We confirmed for the first time that 4.3 million electrodes per die are successfully connected in series with the joining yield of 100%. The joining resistance of CNP bundle with $80{\mu}m$ height is around 30 m for each pair of $10{\mu}m$ dia. electrode. Capacitance value of CNP bundle with $3{\mu}m$ length and $80{\mu}m$ height is around 0.6fF. Eye-diagram pattern shows no degradation even at 10Gbps data rate after the lamination of anisotropic conductive film.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.24 no.1
• /
• pp.59-69
• /
• 1991

Two-level numerical models are formulated to predict the flow pattern, SS(suspended solids) distribution and the behavior of discharged fresh water in estuary, and are applied to the Suyoung River estuary in Pusan, Korea. To verify the application of the models, field observations of tidal current, salinity and 55 were performed during the period of spring tide. Computed upper level velocities by two-level model are in better agreement with observed values than single model. Apart from the magnitude of the velocities, the predicted flow fields at upper level are similar to those obtained at lower level. Upper level velocities in river channel during ebb spring tide are about 2 times stronger than those during flood spring tide due to the discharging flow rate from the Suyoung River. Two-level model results on the salinity and 55 distribution at upper level are compared with the observed ones at the surface. Computed salinity distributions are in good agreement with the observed values, but computed 55 distributions show $6{\~}10$ ppm higher values than the observed ones.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.5
• /
• pp.981-990
• /
• 2001

The purpose of this study is to review the concept of virtuality and analyze in which way virtuality is expressed in fashion. As for the research methodology, literary research was undertaken to study psychoanalytical and socioeconomic contexts in which virtuality has been formed. In addition, demonstrative studies on styles were undertaken through the analysis of photos in modern fashion magazine. With the explosive diffusion of the Internet since the 1990s, people have created a new identity in cyber space. Indeed, computers have made it possible for human beings to make virtual bodies in any way they want. Through the experiment of creating the figures that they dreamed of in their childhood buy could not embody in their actual life, people are making up for their narcissistic ego of their childhood. With the advent of the cyber society, dreams have been realized in cyber space, which in turn has influenced reality and finally had an effect on fashion. In cyber space, People try to break away from their bodies by combining elements of a different nature from them. They are dying hair and skin, and using holographic fabric for fashion, metallic color and geometric pattern for cosmetics. In pursuit of omnipotent beings, people have depicted models as flying in a weightless state and floating in the water within dress of undefined silhouette, so that they can be shown as transcending the law of nature. Furthermore, a variety of cultures newly appearing as dominant in cyber space have constantly interacted with actual life and formed an collage of heterogeneous cultures in fashion.

• Journal of Pharmaceutical Investigation
• /
• v.37 no.1
• /
• pp.39-43
• /
• 2007

Previously, we have reported that PLGA nanoparticles were prepared for sustained release of water-soluble blue dextran and the particle size, in vitro release pattern and encapsulation were modulated by varying polymers. This study was designed to encapsulate plasmid DNA in PLGA nanoparticles and to investigate the effect of Polymers and temperatures. PLGA nanoparticles were fabricated with poloxamer 188 (P188) or poloxamer 407 (P407) by using spontaneous emulsification solvent diffusion method. As a model plasmid DNA, pCMV-Taq2B/1L-18 was encapsulated in PLGA nanoparticles. Then, the particle size, zeta potential and encapsulation efficiency of nanoparticles containing plasmid DNA were investigated. Particle sizes of PLGA nanoparticles prepared with P188 and P407 were in the range of 200-330 nm and 250-290 nm, respectively. Zeta potentials of nanoparticles were negative regardless of nanoparticle compositions. Encapsulation efficiency of P407 nanoparticles prepared at $30^{\circ}C$ was higher than those at other preparation condition. From the results, the PLGA nanoparticles prepared with poloxamers at different temperature, could modulate the particles size of nanoparticles, and encapsulation efficiency of plasmid DNA.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.8
• /
• pp.637-645
• /
• 1998

The characteristics of waveguide, electrode and packaging fabricated for acousto-optic tunable filters(AOTF) used for optical communications were analyzed. A $Ti:LiNbO_3$in-diffusing method was employed for the formation of the optical waveguide with a dimension of width $8{\mu}m$, length $30000-50000{\mu}m$ and varying the thickness. The diffusion was carried at $1050^{\circ}C$ for 8 hours to pattern the optical waveguide. The resulted waveguide exhibited a single mode at 1550nm optical wavelength. The width of IDT, with 10 SAM periods, was $5000{\mu}m$ . Impedances of the electrodes deposited with Au were analyzed using a network analyzer; $48.1\Omega$ at the center frequency of 193MHz for electrode thickness of $1500{\AA}$ and $50.7\Omega$ at the center frequency of 192MHz for $1600\AA$. And the characteristics of packaged AOTF was analyzed. When the electrical frequency 177.1MHz was applied to the device, the mode conversion efficiency was measured as 63% at the optical wavelength 1515nm.

• Earthquakes and Structures
• /
• v.9 no.3
• /
• pp.541-562
• /
• 2015

This paper aims at developing the knowledge on the seismic behavior of dowel beam-to-column connections, typically employed in precast buildings in Europe. Despite the large diffusion of the industrial buildings, a high seismic vulnerability was exhibited by these structures, mostly due to the connection systems deficiencies, during some recent earthquakes (Emilia 2012, Turkey 2011). An experimental campaign was conducted on a typical dowel connection between an external column and a roof beam. In this paper, the performed cyclic shear test is described. According to the experimental results, the seismic response of the system is evaluated in terms of strength, stiffness and failure mechanism. Moreover, the complete damage pattern of the test is described by means of the instrumentations records. The connection failure occurred due to the concrete cover failure in the column (splitting failure). Such a mechanism corresponds to a negligible energy dissipation capacity of the connection, compared to the overall seismic response of the structure. The experimental results are also compared with the results of a similar monotonic shear test, as well as with some literature relationships for predicting the strength of dowel connections under horizontal (seismic) loads.

• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.20-27
• /
• 1993

This paper concerns with developing a simplified in-core fuel management scoping tool for PWR. For this purpose the point reactivity model is put into a fuel cycling decision code, FCYPRM. Modified Borresen's coarse-mesh diffusion theory and nodal expansion method are utilized to form a spatial neutron analysis code, CMSNAP. Numerical experiments are per- formed to determine a set of empirical shuffling rules for working out an automated fuel loading pattern search code, ALPS. The numerical examples are presented for verifying effectiveness and applicability of individual codes. By structuring and applying three codes for reload core design problem of a PWR, it is demonstrated that these codes provide an effective in-core fuel management scoping tool for PWR.