• Microbiology and Biotechnology Letters
• /
• v.48 no.2
• /
• pp.230-235
• /
• 2020

The global evolution of antibiotic resistance has threatened the efficacy of available treatment options with ravaging impacts observed in developing countries. As a result, investigations into the prevalence of antibiotic resistance and the role of plasmids are crucial. In this study, we investigated the presence and distribution of bla_TEM and gyrA genes, plasmid profiles, and the antimicrobial susceptibility pattern of Salmonella strains isolated from raw meat and stool sources across Niger State, Nigeria. Ninety-eight samples, comprising 72 raw meat and 26 stool samples, were screened for Salmonella spp. The antimicrobial susceptibility of Salmonella isolates to 10 commonly used antimicrobial agents was determined using the KirbyBauer disc diffusion method. Isolates were further analyzed for plasmids, in addition to PCR amplification of beta-lactamase (bla_TEM) and gyrA genes. A total of 31 Salmonella spp. were isolated, with 22 from raw meat (70.97%) and 9 from stool (29.03%). Salmonella spp. with multiple resistance patterns to ceftazidime, cefuroxime, ceftriaxone, erythromycin, ampicillin, cloxacillin, and gentamicin were detected. Ofloxacin and ciprofloxacin were found to be the most effective among the antibiotics tested, with 67.7% and 93.5% susceptible isolates, respectively. Nine (29.03%) isolates harbored plasmids with molecular sizes ranging between 6557 bp and 23137 bp. PCR amplification of gyrA was detected in 1 (3.23%) of the 31 isolates while 28 isolates (90.32%) were positive for bla_TEM. This study shows the incidence of antibiotic resistance in Salmonella isolates and the possible role of plasmids; it also highlights the prevalence of ampicillin resistance in this local population.

• Journal of the Institute of Convergence Signal Processing
• /
• v.11 no.4
• /
• pp.326-331
• /
• 2010

This paper has proposed and experimentally demonstrated a new BLU using an LED and an acryl, which is specially focused on the implementation about the guiding effect of an acryl luminous by the LED. While the conventional BLU using a fluorescent lamp is generally and widely used, it shows big power consumption with a short life even more too thick to hold on the wall. To solve such demerits, we propose a new method for a BLU using an LED and an acryl in this paper. This BLU system has various scratches on the surface of acryl to get diffusion effect of light, and has been included an embedded board that can dynamically control the colors and the intensity of the BLU through the Internet. We have conducted computer simulations to find out the optimal scratch pattern on the surface of the acryl for the backlight system. Based on the resulted out simulation. The the optimal scratch pattern signs has been developed. The simulation result shows 2,673Lux an average for a luminous intensity test, and the other hand, experiential result shows 2,554Lux. From the experiments, it is possible for the proposed BLU system to be used for real advertisements.

• Korean Journal of Poultry Science
• /
• v.7 no.1
• /
• pp.53-64
• /
• 1980

A total of 1503 specimens were submitted to the Poultry Disease Diagnostic Service Laboratory during the year 1966 and 1978. The most frequently diagnosed diseases in order of prevalence were avian mycoplasmosis, staphylococcosis, colibacillosis, salmonellosis and pullorum disease, the percentages of the conditions being 24.6%, 20.0%, 18.0%, 12.6% and 6.4%, respectively, The drug resistance of pathogenic mirnoorganisms isolated during the year 1978 from chicken with colicabacillosis, staphylococcosis or salmonellosis were investigated by the use of disc diffusion technique, the results being as follow. 1) Drug resistance of 63 strains of Escherichia coli More than 95% of the strains tested were sensitive to colistin and gentamicin. The percentages of strains sensitive to kanamycin, chloramphenicol, ampicillin and nitrofurantoin were 66.7%, 60.3%, 60.3% and 47.6%, respectively. Majority of the strains were highly resistant to streptomycin and tetracyline. All the strains were resisistant to bacitracin lincomycin, oleandomycin, penicillin and erythromycin. All the strains tested were resistant to more than two among 10 drugs in common use such as penicillin, erythromycin, streptomycin, tetracycline, neomycin, chloramphenicol, kanamycin, ampicillin and gentamicin, and 27 different resistance patterns were noted. The most frequent multiple resistance pattern was PC, EM, SM and TC (11.1%). 2) Drug resistance of 48 strains of Salmonella More than 95% of the strains tested were sensitive to colistin, gentamicin ana ampicillin. The percentages of st rains sensitive to kanamycin, tetracycline, neomycin and nitrofurantoin were 81,3%, 79%, 72.9%, and 68.0% respectively. None of them was sensitive to streptomycin, oleandomycin, erythromycin, lincomycin and bacitracin. All the strains were resistant to more than one among 7 drugs in common use such as streptomycin, erythromycin, neomycin, tetracycline, kanamycin, ampicillin and gentamicin. The most frequent resistance pattern was SM and EM(66.7%). 3) Drug resistance of 54 strains of Staphylococci All the strains tested were sensitive to gentmaicin, kanamycin and cephalothin. Majority of them were highly sensitive to bacitracin, methicillin, nitrofurantoin and chloramphenicol. The Percentages of strains sensitive to streptomycin, ampicillin, lincomycin and tetracycline were 66.7%, 55.6%, 44.4% and 27.8%, respectively. Among them, 51 strains were resistant to more than one among 11 drugs in common use such as tetracycline, lincomycin, ampicillin, penicillin, streptomycin, erythromycin, neomycin, oleandomycin, chloramphenicol, methicillin and bacitracin, and thirty one different resistance patterns were noted.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.77-82
• /
• 2021

Using a multi-array needle module developed for coating of high-density cylindrical microlens array (C-MLA), we have fabricated an anti-Moiré filter for LED screens. The Moiré phenomenon appears due to the interference between the array pattern of image sensors in a camera and the non-emission area (grid pattern) of a LED screen. To suppress it, we have employed poly(methyl methacrylate) (PMMA) and coated it on a glass substrate in the form of a grid and non-grid (parallel lines). We have rotated the needle module in order to increase the number of C-MLAs. With this scheme, we have fabricated the 150 mm × 150 mm anti-Moiré filters where 836 microlens lines are formed. They show the average width of 255.4 ㎛, the average distance between CMLs of 94.6 ㎛, and C-MLA width non-uniformity of 4.7%. We have shown that the Moiré patterns still appear in the presence of the parallel (non-grid)-type filter, whereas they disappeared completely by the grid-type filter. It is due to the fact that the Moiré patterns are diffused more effectively by the grid-type C-MLA.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.20 no.6
• /
• pp.387-395
• /
• 2020

Background: The anterior-middle superior alveolar (AMSA) anesthetic technique has been reported to be a less traumatic alternative to several conventional nerve blocks and local infiltration for anesthesia of the maxillary teeth, their periodontium, and the palate. However, its anatomic basis remains controversial. The present study aimed to determine if the pattern of cortical and cancellous bone density in the maxillary premolar region can provide a rationale for the success of the AMSA anesthetic technique. Method: Cone-beam computed tomography scans of 66 maxillary quadrants from 34 patients (16 men and 18 women) were evaluated using a volumetric imaging software for cortical and cancellous bone densities in three interdental regions between the canine and first molar. Bone density was measured in Hounsfield units (HU) separately for the buccal cortical, palatal cortical, buccal cancellous, and palatal cancellous bones. Mean HU values were compared using the Mann-Whitney U test and one-way ANOVA with post-hoc analysis. Results: Cancellous bone density was significantly lower (P ≤ 0.001) in the palatal half than in the buccal half across all three interdental regions. However, there was no significant difference (P = 0.106) between the buccal and palatal cortical bone densities at the site of AMSA injection. No significant difference was observed between the two genders for any of the evaluated parameters. Conclusions: The palatal half of the cancellous bone had a significantly lower density than the buccal half, which could be a reason for the effective diffusion of the anesthetic solution following a palatal injection during the AMSA anesthetic technique.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.219-225
• /
• 2021

As for the battery package method, a prismatic package method is preferred for stability reasons, but it is rapidly expanding due to the stability verification of a pouch type package. The pouch type using the lamination process has an advantage of high battery energy density because it can reduce space waste, but has a disadvantage of low productivity. Therefore, in this paper, by extracting edge detection algorithm precision, pattern algorithm precision, and motion controller recall rate by improving backlight lighting fixtures to minimize light diffusion, securing standards for stereo camera position relationship displacement monitoring, and securing standards for lens release monitoring. We propose to implement a system that ensures accuracy and reliability in positioning. As a result of the experiment, the proposed system shows an average error range of 0.032mm for edge detection, 0.02mm for pattern algorithm, and 0.014mm for motion controller, thus ensuring the accuracy and reliability of the positioning mechanism.

• Microbiology and Biotechnology Letters
• /
• v.49 no.4
• /
• pp.587-593
• /
• 2021

Infertility is a key issue affecting mood and behavior in men. Microorganisms are one of the primary etiological agents that may be associated with infertility. The objective of the present study was to identify bacterial causative agents from the semen of infertile subjects and determine the effect of bacterial infection on sperm quality, as well as determine the susceptibility of these bacteria to drugs. Forty semen samples from 30 infertile patients and 10 fertile individuals were collected. The pH, volume, motility, and concentration of semen were analyzed. The samples were processed and identified by biochemical testing using API identification kits. The antibiotic susceptibility pattern was determined using the disc diffusion method. Abnormal sperm quality was observed. The mean age of the individual and their sperm morphology, concentration, progressive motility, pH level, and pus cell content were 31.9 years, 2.7%, 10.4 million/ml, 27.3%, 8.3, and 5.7, respectively. Among the tested samples, oligoasthenozoospermia was found to show the highest occurrence, at 27/30 samples, followed by teratozoospermia, at 25/30 samples, and asthenozoospermia, at 22/30 samples. Of the tested infertile patients' sperm, 19, 6, and 5 isolates were identified as Escherichia coli, Klebsiella pneumonia, and Staphylococcus epidermidis, respectively. The results also revealed multi-drug resistance in the bacteria. Compared to that shown by the other tested antibiotics, amikacin showed higher activity against all isolated bacteria. However, the bacteria exhibited maximum resistance against gentamicin, cefotaxime, levofloxacin, and ampicillin. In conclusion, leukocytospermia and bacterial infections are possibly responsible for sperm abnormalities. Multi-drug resistant bacteria were detected. Gentamicin, cefotaxime, levofloxacin and ampicillin were shown the highest resistance, while amikacin was the most effective antimicrobial agent against the isolated bacteria.

• Korean Journal of Veterinary Research
• /
• v.49 no.3
• /
• pp.195-200
• /
• 2009

Avian pathogenic Escherichia coli (APEC) is an important bacterial pathogen of chickens and causes colibacillosis such as airsacculitis, perihepatitis, omphalitis, peritonitis, salpingitis, and pericarditis. As the transfer of antibiotic resistance from animal to humans can be possible, surveillance on antibiotic resistance of APEC is very important. A total 34 APEC isolates from diseased chickens during the period from 2007 to 2009 were obtained. The susceptibility of the isolates to 13 antibiotics was determined by disc diffusion assay. Resistance to erythromycin was found in 97.1% of APEC isolated, followed by resistance to tetracycline (85.3%), doxycycline (82.3%), ampicillin (73.5%), sulfisoxazole (67.6%), enrofloxacin (67.6%), ciprofloxacin (64.7%), norfloxacin (61.7%) trimethoprim/sulfamethoxazole (52.9%), gentamycin (26.5%), amoxicillin (8.8%), colistin (5.9%), and amikacin (2.9%). The blaTEM genes were detected in 25 (100%) of the 25 ampicillin-resistant APEC isolates. Among the 29 tetracycline-resistant APEC isolates, tetA and tetB genes were detected in 18 (62.1%) and 9 (31%) isolates, respectively. Twenty six (76.5%) isolates were multiresistant to at least 6 antibiotics and seven (20.1%) isolates were multiresistant to at least 10 antibiotics. This results indicated that multiple antibiotic-resistant APEC is widespread in chicken flocks in Korea.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.79-85
• /
• 2007

Demand forecasting methods for a consumer product such as TV or refrigerator are widely known. However, sales forecast for a brand new product cannot be estimated using conventional forecasting methods. This study proposes a five-step procedure in forecasting a newly developed product. Step one defines functions in a High Touch product in order to estimate relative attraction of the product to consumer group. In step two, for a comparison purpose, a compatible product that is successfully penetrated into market is selected. Step three breaks a target population into many segments based on demography. Step four calculates relative attraction between the High Touch product and the compatible product. Finally, market penetration rate of the High Touch product is estimated using a bell-shaped diffusion curve of the compatible product. The process offers a method to estimate potential demand and growth pattern of the new High Touch product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.196.2-196.2
• /
• 2015

There are various issues fabricating the successful and efficient solar cell structures. One of the most important issues is band alignment technique. The solar cells make the carrier in their active region over the p-n junction. Then, electrons and holes diffuse by minority carrier diffusion length. After they reach the edge of solar cells, there exist large energy barrier unless the good electrode are chosen. Many various conductor with different work functions can be selected to solve this energy barrier problem to efficiently extract carriers. Tungsten oxide has large band gap known as approximately 3.4 eV, and usually this material shows n-type property with reported work function of 6.65 eV. They are extremely high work function and trap level by oxygen vacancy cause them to become the hole extraction layer for optical devices like solar cells. In this study, we deposited tungsten oxide thin films by sputtering technique with various sputtering conditions. Their electrical contact properties were characterized with transmission line model pattern. The structure of tungsten oxide thin films were measured by x-ray diffraction. With x-ray photoelectron spectroscopy, the content of oxygen was investigated, and their defect states were examined by spectroscopic ellipsometry, UV-Vis spectrophotometer, and photoluminescence measurements.