• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.1
• /
• pp.11-16
• /
• 1997

Sorption studies involving the sorption of n-propanol by an Amorphous Nylon(Nylon 6I/6T) were carried out as a function of sorbate vapor activity at $23^{\circ}C$. Vapor activity levels from 0.035 to 0.91 were investigated to evaluate the concentration dependency of sorption mechanism. Sorption behavior of propanol by Nylon 6I/6T showed distinctive two mode sorption phenomena as a function of Vapor activity. At Vapor activity levels below a=0.11, equilibrium sorption was achieved within a short period of time(less than 20hrs), which can be interpreted as following a Fickian diffusion model. A Langmuir-Flory-Muggins Dual Mode Sorption model can also be applied at these concentration levels. However, for Vapor activities above a=0.11, the sorption process appeared to be non-Fickian and resulted in a lack of equilibrium being attained.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.411-411
• /
• 2010

Cavity mode Whistler wave를 사용하는 자화유도결합플라즈마 (Magnetized Inductively Coupled Plasma, MICP)의 제반 특성을 비등방성 수송계수를 가지는 Drift-Diffusion 근사, 에너지 보존 방정식 및 유도전자계를 self-consistent 하게 고려하여 계산하였다. 이러한 접근법은 비충돌성 전자가열현상을 고려하지 못하는 단점에도 불구하고, 반도체 장비설계에 필수적인 전자온도, 밀도, 플라즈마 전위, 시스템의 임피던스 특성에 대한 경향성 파악에 매우 유용하다. 뿐만 아니라 전자밀도분포가 공간내에 형성되는 R-wave mode에 미치는 영향을 분석할 수 있다. 직경 320 mm를 가지는 작은 반응기에서 시뮬레이션과 실험결과를 비교하여 본 모델링 방법의 타당성을 검증한 후, 450 mm wafer가공에 적합한 대면적 플라즈마 반응기에서 플라즈마 특성을 연구하였다. 수 mTorr의 공정압력에서 약 10 Gauss전후의 약한 자장이 인가됨으로서 반경방향의 전자밀도 균일성이 대폭 향상되었다. 플라즈마 및 안테나의 대면적화에 수반되는 높은 Q값이 자장의 인가로 큰 폭으로 감소함으로서 임피던스메칭의 안정성이 비약적으로 개선되었고 전력전달 효율 또한 크게 증가함을 알 수 있었다. 본 연구 결과는 차세대 450 mm 반도체 공정장비의 개발에 있어 자화유도결합플라즈마가 매우 유용하게 사용될 수 있음을 보여준다.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.219-222
• /
• 2014

The flame chemiluminescence is a good tracer of flame statement. In this study, the characteristics of flame chemiluminescence($OH^*$, $CH^*$, ${C_2}^*$) according different measuring locations using photomultiplier(PMT), spectrometer and CCD camera. Measurements are made for $OH^*$, $CH^*$, ${C_2}^*$ radicals in gas & light oil diffusion flames. At turbulent nonpremixed combustion mode, the equivalence ratio is varied. The experimental results showed that measuring location affects the result of flame chemiluminescence.

• Proceedings of the Optical Society of Korea Conference
• /
• 1990.02a
• /
• pp.269-273
• /
• 1990

The proton conserving effect of diffusion with self-aligned SiO2-cladding is investigated by infrared transmission spectra. Based on the proton conserving effect, proton-diffused channel waveguides with self-aligned SiO2-cladding substrates. And an electro-optic cutoff modulator with self aligned electrode that utilizes a single-mode proton-diffused channel waveguide in a Y-cut XX-propagating LiNbO3 substrate is fabricated. Over 20 dB extinction has been achieved with applied voltage of 15V.

• 전기의세계
• /
• v.29 no.4
• /
• pp.256-259
• /
• 1980

A singular pertubation theory is applied to obtain an approximate solution for suboptimal control of nuclear reactors with spatially distributed parameters. The inverse of the neutron velocity is regarded as a small perturbing parameter, and the model, adopted for simplicity, is a cylindrically symmetrical reactor whose dynamics are described by the one group diffusion equation with one delayed neutron group. The Helmholtz mode expansion is used for the application of the optimal theory for lumped parameter systems to the spatially distributed parameter systems. An asymptotic expansion of the feedback gain matrix is obtained with construction of the boundary layer correction up to the first order.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.2
• /
• pp.28-31
• /
• 1977

Normal modes of carrier waves due to longitudinal modulation in solids have been defined. The dispersion relationship of these waves in the presence of collision effects and thermal diffusion is derived and examined in detail. It is also shown that the carrier waves are reduced to the wellknown space-charge waves and electroacoustic hayes in special cases.

• Archives of Pharmacal Research
• /
• v.2 no.1
• /
• pp.65-70
• /
• 1979

Distribution and binding properties of sodium salicylate the human red blood cells were studied under various experimental conditions. The effect of tonicity and hemolysis on the steady state level of the drug within the human red blood cells were accounted for in this study. When the washed cells were suspended in normal saline solution, the drug was so rapidly permeated into red cells. Since the pH of the system forces nearly complete ionization of the drug, ionic diffusion through aqueous pores is thought to be the mode of salicylate transport. Human red cell binding capacity and association constant for salicylate were estimated. This work supports the view that the red cells act asan important reservior of salicylate.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.8
• /
• pp.57-64
• /
• 2016

Initial prevention activities and rapid propagation conditions is the most important to prevent diffusion of water pollution. If water pollutants flow into streams river or main stresm located in environmental conservation area or water intake facilities, we must predict immediately arrival time and the diffusion concentration to the proactive. National Institute of Environmental Research developed water pollution incident response prediction system linking dam and movable weir. the system is mathematical model which is updated daily. Therefore it can quickly predict the arrival time and the diffusion concentration when there are accident of oil spills and hazardous chemicals. Also we equipped with mathematical model and toxicity model of EFDC(Environmental Fluid Dynamics Code) to calculate the arrival time and the diffusion concentration. However these systems offer the services of an offline manner than real-time control services. we have ensured the reliability of data collection and have developed a real-time water quality measurement data transmission device by using the data linkage utilizing a mode bus communication and a commercial SCADA system, in particular, we implemented to be able to do real-time water quality prediction through information infrastructure of the water quality integrated management business created by utilizing the construction of the real-time prediction system that utilizes the data collected, the Open map, the visual representation using charts API and development of integrated management system development based on web maps.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.746-752
• /
• 2015

This study investigates the effects of aspect ratio (transport length-to-width) on diffusive-convection for physical vapor transport processes of $Hg_2Cl_2-NO$ system. For a system with the temperature difference of 20 K between an interface at the source material region and growing crystal interface, the linear temperature profiles at walls, the total molar fluxes at Ar = 2 are much greater than Ar = 5 as well as the corresponding nonuniformities in interfacial distributions due to the effect of convection. The maximum total molar flux at the gravitational acceleration of 1 $g_0$ is greater twice than at the level of 0.1 $g_0$, where g0 denotes the gravitational acceleration on earth. With increasing aspect ratio from 2 to 5, a diffusive-convection mode is transited into the diffusion mode, and then the strength of diffusion is predominant over the strength of diffusive-convection.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.5
• /
• pp.69-79
• /
• 1999

In this paper, we proposed a diffuion model of Ti diffused lithium niobate optical waveguide for fabricating waveguides with high refractive index and compared with conventional one. The achivement of low optical insertion loss between waveguide interface and single mode fibers was discussed as a function of Ti thickness for $\lambda$=1.55$\mu\textrm{m}$ The proposed diffusion method exhibited higher refractive index waveguide than conventional one for $\lambda$=0.6328$\mu\textrm{m}$ We have achieved the total fiber-waveguide-fiber insertion loss as low as 0.5dB/cm in z-cut and 1$\pm$0.5dB/cm in x-cut for both TM and TE mode of Mach-Zehnder interferometric waveguide in the range of Ti thickness 1000-1400$\AA$ for $\lambda$=1.55$\mu\textrm{m}$ From these results, this diffusion model for making a low loss waveguide can be used for low-power-modulators and switches.