• Journal of the Korean Chemical Society
• /
• v.37 no.1
• /
• pp.10-21
• /
• 1993

The transport phenomena of ten amino acid molecules through poly(2-hydroxyethyl methacrylate), P(HEMA) membrane have been investigated in various range pH solutions. It is found that the permeability and diffusivity of the amino acids through membrane depended on the different shape, size and the charge of them are changed by the pH. The permeabilities and diffusivities of amino acids have the largest value in the neutral solution. In this case, they are diffused through free water in the P(HEMA) membrane and the diffusion mechanism is the pore type. The basic solution have larger value than the acidic it. Whether the diffusion mechanism of the core type or the partition type, it is depended on the effect of side chain of the amino acid in basic and acidic solution.

• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.75-84
• /
• 2023

The accumulation of spent carbide (YG8), not only pollutes the environment but also causes waste of tungsten, cobalt and other rare metal resources. To better address this issue, we proposed a combined electrochemical separation process of low-temperature aqueous solution and high-temperature molten salt for tungsten and cobalt. H₂WO₄ was obtained from spent carbide in an aqueous solution, and we calcined it to obtain WO₃, which was used as a raw material to obtain tungsten by using molten salt electrodeposition. The influence of the current efficiency and the electrochemical behavior of the discharge precipitation of W(VI) were also studied. The calcination results showed that the morphology of WO₃ was regular and there were no other impurities. The maximum current efficiency of 82.91% was achieved in a series of electrodeposition experiments. According to XRD and SEM analysis, the recovered product was high purity tungsten, which belongs to the simple cubic crystal system. In the W(VI) reduction mechanism experiments, the electrochemical process of W(VI) in NaCl-Na₂WO₄-WO₃ molten salt was investigated using linear scanning voltammetry (LSV) and chronoamperometry in a three-electrode system. The LSV showed that W(VI) was reduced at the cathode in two steps and the electrode reaction was controlled by diffusion. The fitting results of chronoamperometry showed that the nucleation mechanism of W(VI) was an instantaneous nucleation mode, and the diffusion coefficient was 7.379×10^-10 cm²·s^-1.

• Geomechanics and Engineering
• /
• v.34 no.2
• /
• pp.155-171
• /
• 2023

Aiming at the grouting treatment of water inflow in karst conduits, a visualized experiment system for conduit-type grouting blocking was developed. Through the improved water supply system and grouting system, and the optimized multisource information monitoring system, the real-time observation of diffusion and deposition of slurry, and the data acquisition of pressure and velocity during the whole process of grouting were realized, which breaks through the problem that the monitoring element is easy to fail due to slurry adhesion in conventional test system. Based on the grouting experiments in static and flowing water, the diffusion and deposition behavior of the quick-setting slurry under different working conditions were analyzed. The temporal and spatial variation behavior of the pressure and velocity were studied, and the blocking mechanism of the grouting were further revealed. The results showed that: (1) Under the flowing water condition, the counter-flow diffusion distance of slurry was negatively correlated with the flow water velocity and the volume ratio of cement and sodium silicate (C-S ratio), and positively correlated with the grouting volume. The slurry deposition thickness was negatively correlated with the flowing water velocity, and positively correlated with the grouting volume and C-S ratio. (2) The pressure increased slowly before blocking of the flowing water and rapidly after blocking in karst conduits. (3) With the continuous progress of grouting, the flowing water velocity decreased slowly first, then significantly, and finally tended to be stable. According to the research results, some engineering recommendations were put forward for the grouting treatment of the conduit-type water inflow disaster, which has been successfully applied in the treatment project of the China Resources Cement (Pingnan) Limestone Mine. This study provided some guidance and reference for the parameter optimization of grouting for the treatment projects of water inflow in karst conduits.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.2
• /
• pp.239-246
• /
• 2004

To improve the durability of concrete structure, we usually consider the reduction of water-cement ratio, the increase of concrete cover depth and the use of mineral admixtures. The use of admixtures make concrete more durable and tighten against water in recent papers so it is needed to study more about the relationship between the admixtures and the chloride ion diffusion. Therefore we analyzed the correlation between chloride ion diffusion and physical properties such as compressive strength, void ratio, air permeability of the concrete, and tried to use them as fundamental data for analyzing chloride ion diffusion mechanism of the concrete mixed with mineral admixtures.

• Macromolecular Research
• /
• v.11 no.6
• /
• pp.444-450
• /
• 2003

Hydrophobically End-capped polyethylene oxide Urethane Resin(HEUR)-associating polymers, HEUR 35(8), HEUR 35(12), and HEUR 35(18), comprise a polyethylene oxide (PEO) having a molecular weight of 35,000 that is end capped with two C$\_$8/H$\_$17/, C$\_$12/H$\_$25/, and C$\_$18/H$\_$37/ alkyl chains, respectively. These associating polymers were synthesized by condensation reactions with polyethylene oxides and alkyl isocyanates. The self-diffusion coefficients of HEUR-associating polymers were measured in aqueous solution by pulsed-gradient spin-echo (PGSE) nuclear magnetic resonance (NMR) spectroscopy. All polymers underwent a decrease in their mean diffusion coefficients as the concentration was increased. However, the dispersion of the diffusion coefficients, ${\beta}$, about the mean fluctuated with changes in concentration. The large dispersion at low concentrations of HEUR 35(8) and HEUR 35(12) is related to the interaction between hydrophobic end groups, and the large dispersion at high concentrations of HEUR 35(18) is correlated with transient network formation. These results are valuable for predicting the associating mechanism of the large aggregates before and after their critical micelle concentration.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.296-302
• /
• 2008

The effective moisture diffusivity and its dependence on drying temperature during drying of rapeseed were experimentally investigated. The data were recorded from thin layer drying experiments at nine different combinations of drying air temperatures of 40, 50, and $60^{\circ}C$ and the relative humidities of 30, 45, and 60%. The moisture diffusion equation was analyzed using stepwise multiple regression analysis. Effective moisture diffusivities were calculated based on the moisture diffusion equation for a spherical shape using Fick's second law. The effective diffusivities during the drying of rapeseed were $l.72{\times}10^{-11}$, $2.41{\times}10^{-11}$ and $3.31{\times}10^{-11}\;m^2{\cdot}s^{-1}$ at 40, 50 and $60^{\circ}C$, respectively. The activation energy for moisture diffusion during drying was $28.47\;kJ{\cdot}mol^{-1}$. The dependence of moisture diffusivity on temperature was described by an Arrhenius-type equation. Drying occurred in the falling rate period and the internal moisture diffusion phenomenon is the governing physical mechanism of the moisture movement in the particles.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.342-349
• /
• 2011

[ $Nd_2Fe_{14}B$ ]permanent magnetic powders ($_iH_c$ = 9.2 kOe, $B_r$ = 12.2 kG) were produced by HDDR process. Their coercivity was enhanced to 12.6 kOe through the grain boundary diffusion process with dysprosium hydride ($DyH_x$). $DyH_x$ diffusion process was optimized through rotating diffusion process, resulting in distinct phases rich in Nd and Dy observable by field emission scanning microscopy and transmission electron microscopy. The mechanism of coercivity enhancement that resulted in restrain the coupling effect between $Nd_2Fe_{14}B$ grains is also discussed.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.50 no.4
• /
• pp.77-88
• /
• 2008

Odor is one of the major nuisances in the environment. In most countries, odor annoyance from livestock production is an increasing problem in community. In order to reduce the odor inconvenience and establish a good relation between livestock industries and the surrounding communities, many studies, such as diffusion simulations and field experiments, on the odor dispersion and its reduction have been investigated. These studies need to accompany the aerodynamic approach, as a main mechanism of diffusion phenomenon, and computational fluid dynamics(CFD) can be effectively used to study this kind of research. CFD considers both various wind conditions as well as topographical conditions to study aerodynamic phenomenon. Therefore the ultimate objective of the study was to develop an aerodynamic model to predict qualitatively and quantitatively odor diffusion from livestock. In this study, as the first step of this study, various phenomena and factors of odor diffusion from livestock houses were investigated through field experiments in 2007. Later, those data will be also used to verify the CFD accuracy as well as to develop 3-dimensional CFD model.

• Journal of the Korean Society of Safety
• /
• v.26 no.1
• /
• pp.21-26
• /
• 2011

Extinction and ignition characteristics of $CH_4$-air counterflow diffusion flame were numerically investigated using a Flame-Controlling Method(FCM). A skeletal reaction mechanism, which adopts 17 species and 58 reactions, was used in the simulation. The extinction and ignition conditions of the $CH_4$-air diffusion flames were investigated with varying the global strain rate. Upper and middle branches of S-curve for the peak temperature in the inverse of the global strain rate space were obtained with the FCM. The structures of diffusion flames in the upper and middle branches of S-curve were compared. It was found that the global strain rate was not correlated with the local strain rate well in the low global strain rate region. It is expected that the FCM is very useful to obtaining the extinction and ignition condition of diffusion flame, such as fires.

• Environmental Engineering Research
• /
• v.10 no.3
• /
• pp.112-121
• /
• 2005

The effectiveness of quicklime-based stabilization/solidification (S/S) in immobilizing lead (Pb) was assessed by performing semi-dynamic leaching tests (ANS16.1). In order to simulate landfill leaching conditions, the ANS 16.1 test was modified by using 0.014 N acetic acid (pH = 3.25) instead of distilled water. Artificial soil samples as well as field soil samples contaminated with Pb were tested. The effectiveness of quicklime treatment was evaluated by determining diffusion coefficients ($D_e$) and leachability indices (LX). A model developed by de Groot and van der Sloat was used to elucidate the controlling Pb leaching mechanisms. Overall, upon quicklime treatment Pb leachability was significantly reduced in a]l of the samples tested. The mean LX values were higher than 9 for an artificial soil sample containing 30% kaolinite treated with 10% quicklime and for a field soil sample treated with 10% quicklime, which suggests that S/S treated soils can be considered acceptable for "controlled utilization". Moreover, quicklime treatment was more effective in artificially contaminated soil with high kaolinite content (30%), indicating the amount of clay plays an important role in the success of the treatment. The controlling Pb leaching mechanism was found to be diffusion, in all quicklime treated samples.