• 대한전자공학회논문지SP
• /
• 제40권5호
• /
• pp.303-311
• /
• 2003

MPEG-4 표준에서는 객체 단위의 부호화를 수행하기 위해 우선 자연영상으로부터 비디오 객체론 분리하는 영상분할(Segmentation) 기술이 필요하다. 영상분할 방법은 크게 자동 영상분할(Automatic Segment값ion)과 반자동 영상분할(Semi-automatic Segmentation)의 두 부류로 나눌 수 있다. 대부분의 자동 영상분할 방법은 비디오 객체의 명확한 모델을 수학적으로 제시하기 어려우므로 한 화면에서 개별 객체를 추출하기 어렵기 때문에 그 성능에 한계가 있다. 본 논문에서는 이러한 문제점을 극복하기 위해 기하학적인 Active Contour를 이용한 반자동 영상분할 알고리즘을 제안한다. 매개변수 방식의 Active Contour와 달리, 기하학적인 Active Contour는 곡선의 변화론 Level Set 방법을 이용하여 기술하기 때문에 초기 곡선의 모양을 객체의 모양과 무관하게 그릴 수 있다. 평탄화된 영상으로부터 경계함수를 생성하기 위해 이진화된 3차원 확산 모델을 사용하여 LUV 벡터 공간에서 비등방형 확산을 수행한다. 본 논문에서는 흐름 벡터장(Advection Vector Field)에서 곡선을 수축하고, 움직임 정보를 이용하여 곡선 확장하는 방법을 이용하여 동영상에서 객체를 분리하는 방법을 제안한다.

• 대한기계학회논문집B
• /
• 제27권9호
• /
• pp.1209-1219
• /
• 2003

The dynamic behaviors of the single vortex interacting with $CH_4-Air$ jet diffusion flame are investigated numerically. The numerical method is based on a predict-corrector scheme for a low Mach number flow. A two-step global reaction mechanism is adopted as a combustion model. Studies are conducted in fixed initial velocities for the three cases according as where $CO_2$ is added; (1) without dilution, (2) dilution in fuel stream and (3) dilution in oxidizer stream. A single vortex is generated by an axisymmetric jet, which is made by an impulse of a cold fuel when a flame is developed entirely in a computational domain. The simulation shows that $CO_2$ dilution in fuel stream results in somewhat larger vortex radius, and greater amount of entrainment of surrounding fluid than in other cases. Thus, the dilution of $CO_2$ in fuel stream enhances the mixing in single vortex and increases the stretching of the flame surface. The budgets of the vorticity transport equation are examined to reveal the mechanism of vortex formation when $CO_2$ is added. It is found that, in the case of $CO_2$ dilution in fuel stream, the vortex destruction due to volumetric expansion and the vortex production due to baroclinic torque are more dominant than in other cases.

• 한국터널지하공간학회 논문집
• /
• 제8권3호
• /
• pp.259-271
• /
• 2006

본 연구에서는 시멘트 모르타르계 충전재에서 염화물의 확산에 의해 발생할 수 있는 록볼트의 부식 가능성을 예측하고자 하였다. 장기적인 내구성 측면에서 지하수에 포함된 황산염이나 염화물과 같은 화학적 성분들에 의해 록볼트 성능이 저하될 수 있으며, 특히 록볼트 강봉은 주로 염화물에 의해 부식된다. 이러한 록볼트의 부식은 강봉의 체적 팽창을 야기하여 결국 록볼트 충전재에 균열을 발생시키게 된다. 따라서 본 연구에서는 염화물에 의한 록볼트의 부식여부를 평가하고 록볼트의 장기 내구성을 예측하기 위한 척도로서, 시멘트 모르타르계 충전재의 염화물 확산계수를 이용하였다. 이때 염화물 확산계수를 측정하기 위하여 전기촉진시험법을 적용하였다.또한 실험실조건에서 록볼트의 인발내력을 보다 쉽게 측정하기 위하여 간단한 인발시험 시스템을 새롭게 제안하였다. 본 연구의 실험결과, 일반적인 콘크리트 재료에서보다 시멘트 모르타르계 충전재에서 염화물의 확산이 더욱 용이 한 것으로 나타났다. 즉, 록볼트가 완전 충전된 경우라 할지라도 부식을 발생시킬 수 있는 화학적 성분의 농도가 높은 경우, 화학적 성분의 확산에 의해서 단기간에 록볼트가 쉽게 부식될 수 있는 것으로 나타났다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.946-951
• /
• 2009

The research aims to study a new, optimum and renewable energy application method that can cover the minimum energy and operation costs within a range of school budgets. By deriving the optimum application method, it is expected to maximize the cooling/heating and water heating energy saving efficiencies for educational facilities. Therefore, this research carried out a study on the new/renewable energy utilization technique diffusion expansion method and the optimum method. As a result, the first optimum plan was introduced with the multi-type geothermal heat pump 174kW + solar heat collector $94\;m^2$ + highly efficient electronic cooling/heating device (EHP) 249.4kW. On the other hand, the second optimum plan was induced as the multi-type geothermal heat pump 255.2kW + highly efficient electronic cooling/heating device (EHP) 168.2kW.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.564-574
• /
• 2009

The study is conducted to study a new, optimum and new and renewable energy application method that can cover the minimum energy and operation costs within a range of school budgets. By deriving the optimum application method, it is expected to maximize the cooling/heating and hot water supply energy saving efficiencies for educational facilities. Therefore, this research implemented a study on the new and renewable energy utilization technique diffusion expansion method and the optimum method. As a result, the first optimum plan was introduced with the multi-type geothermal heat pump 475.6 kW+highly efficient electronic cooling/heating device(EHP) 545.2 kW. On the other hand, the second optimum plan was induced as the multi-type geothermal heat pump 261kW+solar heat collector $240\;m^2$+highly efficient electronic cooling/heating device(EHP) 759.8 kW.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2431-2441
• /
• 2020

Currently, the pin-by-pin homogenized solvers are a very active research field as they can, unlike the nodal codes, directly predict the local power, while requiring significantly less computational resources than the heterogeneous transport codes. This paper presents a recently developed pin-by-pin diffusion/SP3 solver Tortin, its spatial discretization method and the reflector treatment. Regarding the spatial discretization, it was observed that the finite difference method applied on pin-cell size mesh does not properly capture the big flux change between MOX and uranium fuel, while the nodal expansion method is more accurate but too slow. If the finite difference method is used with a finer mesh in the outer two pin rows of the fuel assembly, it increases the required computation time by only 50%, but decreases the pin power errors below 1% with respect to lattice code reference solutions. The paper further describes the coupling of Tortin with a microscopic depletion solver. Several verification tests show that the SP3 pin-by-pin solver can reproduce the heterogeneous transport solvers results with very good accuracy, even for fuel cycle depletion of very heterogeneous core employing MOX fuel or inserted control rods, while being two orders of magnitude faster.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1999년도 춘계학술발표회요약집
• /
• pp.22-22
• /
• 1999

The HELlOS-MASTER code system is verified through the benchmark of the critical experiments that were performed by RRC "Kurchatov Institute" with water-moderated hexagonally pitched lattices of highly enriched Uranium fuel rods (8Ow/o). We also used the same input by using the MCNP code that was described in the evaluation report, and compared our results with those of the evaluation report. HELlOS, developed by Scandpower A/S, is a two-dimensional transport program for the generation of group cross-sections, and MASTER, developed by KAERI, is a three-dimensional nuclear design and analysis code based on the two-group diffusion theory. It solves neutronics model with the AFEN (Analytic Function Expansion Nodal) method for hexagonal geometry. The results show that the HELIOSMASTER code system is fast and accurate enough to be used as nuclear core analysis tool for hexagonal geometry.ometry.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.111-112
• /
• 2013

An experimental study of a dual swirl burner was conducted to analyze NOx emission in the lean conditions. The dual swirl burner is composed of a combination of swirling jet premixed(main section) and diffusion flames(pilot section). It was operated with a co-swirling configuration and overall equivalence ratios between 0.6 and 0.8. The purpose of this study is to analyze experimentally the characterization of flame temperature and NOx concentration in reacting zone and to supply the useful experimental data for numerical simulations. The measurements of temperature and NOx concentration were captured using a thin digitally-compensated thermocouple and a sampling quartz probe with quenching effect of sudden expansion, and were measured by the NOx analyzer of chemiluminescence method. We could analyse the NOx emission characteristics comparing the temperature distributions in the lean equivalence ratios.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.733-743
• /
• 2000

We solve the integral representation of the Navier-Stokes equations in a lagrangian view by tracking the particles, which have vortex strengths. We simulate the unsteady viscous flow around an impulsively started cylinder using the vortex particle method. Particles are advanced via the Biot-Savart law for a lagrangian evolution of particles. The particle strength is modified based on the scheme of particle strength exchange. The solid boundary satisfies the no-slip boundary condition by the vorticity generation algorithm. We newly modify the diffusion scheme and the boundary condition for simulating an unsteady flow efficiently. To save the computation time, we propose the mixed scheme of particle strength exchange and core expansion. We also use a lot of panels to ignore the curvature of the cylinder, and not to solve the evaluation of the surface density. Results are compared to those from other theoretical and experimental works.

• Journal of Mechanical Science and Technology
• /
• 제18권10호
• /
• pp.1712-1721
• /
• 2004

A method of measuring the thermal diffusivity of semi-infinite solid material at room temperature using photothermal displacement is proposed. In previous works, within the constant thickness of material, the thermal diffusivity was determined by the magnitude and phase of deformation gradient as the relative position between the pump and probe beams. In this study, however, a complete theoretical treatment of the photothermal displacement technique has been performed for thermal diffusivity measurement in semi-infinite solid materials. The influence of parameters, such as, radius and modulation frequency of the pump beam and the thermal diffusivity, was studied. We propose a simple analysis method based on the zero -crossing position of real part of deformation gradient and the minimum position of phase as the relative position between two beams. It is independent of parameters such as power of pump beam, absorption coefficient, reflectivity, Poisson's ratio, and thermal expansion coefficient.