• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.455-462
• /
• 2015

H-field EMI measurements have been performed for the single-ended, the differential, and the pseudo-differential signaling on a 11" FR4 microstrip line. The pseudo-differential signaling reduces EMI by more than 10 dB compared to the single-ended signaling if the delay mismatch is lower than 5% of a period for a 3 GHz clock signal. Empirical H-field equations for both differential and single-ended signaling showed fair agreements with measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전력기술부문
• /
• pp.274-276
• /
• 2002

This paper proposes a current differential relaying algorithm for power transformers using the third difference function of a differential current. The algorithm observes the instants when the wave-shape of the differential current is changed due to the change of the magnetization inductance. If the value of the third difference is bigger than the threshold, the output of a current differential relay is blocked for a cycle. In the cases of magnetic inrush and overexcitation, the blocking signal is maintained: however, for internal faults, reset in a cycle. The test results clearly show that the algorithm successfully distinguishes internal faults from magnetizing inrush.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.1017-1026
• /
• 2005

버스트 방식 OFDM 시스템에서의 프레임 동기는 수신된 프레임의 시작 위치를 판단하고, 정확한 FPT-window 위치 추정을 위해 가장 우선적으로 수행되어야 한다. 유효 OFDM 심볼 내의 규정된 반복 패턴 또는 보호 구간의 상관을 이용하는 기존의 일반적인 프레임 동기 방식은 연속적으로 증가하다 감소하는 상관 출력 특성에 의해 정확한 프레임 시작 지점 검출이 어려우며, 수신 신호와 기준 신호 간의 상관 특성을 이용하는 방식은 주파수 옵셋으로 인한 성능 열화를 초래한다. 따라서, 본 논문에서는 프레임 동기 방식으로서 주파수 옵셋에 강인하고 정확한 프레임 시점 검출이 가능한 차동 상관(Differential Correlation) 방식을 기반으로 한 새로운 알고리즘을 제안하였다. 그러나, 일반적인 차동 신호의 상관 결과는 프리앰블의 반복 구조에 의해 다수의 Peak를 가지게 되며 이로 인하여 정확한 프레임 동기의 검출 성능이 열화된다. 본 논문에서는 이러한 차동 검출 방식의 단점을 보완하기 위하여 차동 신호 생성 시 반복되는 동일 패턴 구간의 샘플을 이용하여 단일 상관 Peak를 갖는 알고리즘을 제안한다. 또한 다중경로 페이딩 채널 환경에서 페이딩에 의한 프레임 시작 위치 검출 에러를 줄이기 위하여 신호 전력으로 상관 출력 값을 정규화하는 블록을 도입함으로써 고속 이동 채널 환경에서의 프레임 시작 지점 검출 확률을 높였다.

• 한국전자통신학회논문지
• /
• 제9권10호
• /
• pp.1197-1205
• /
• 2014

최근 초고화질(4K-UHD) 영상 시스템의 신호전송은 비압축 고속 데이터로 전송되며 고속 신호의 인터페이스 구간에 서로 다른 케이블 사이에서 나타나는 EMI, 스큐(skew) 문제로 인하여 영상신호의 왜곡, 지터 등으로 시스템 구현에 한계가 있다. 이와 같이 비압축 고속 데이터를 고속전송하기 위하여 V-by-One HS 인터페이스 기법을 적용하여 본 논문에서는 고속 영상신호에 대하여 HSD(High Speed Differential) 전송선로의 신호무결성을 분석하였다. UHD 영상패턴 제어 인터페이스의 PCB 설계 방법을 RF 전송기법으로 적용하였으며 구현된 4K-UHD급 영상패턴 제어 신호발생기의 V-by-One HS 영상신호를 측정한 결과, 전송품질이 고속전송신호규격에 만족함을 보였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.500-506
• /
• 2004

This paper proposes a modified current differential relay for transformer protection unaffected by the remanent flux. The relay uses the same restraining current as a conventional relay, but the differential current is modified to compensate for the effects of the exciting current. To cope with the remanent flux, before saturation, the relay calculates the core-loss current and uses it to modify the measured differential current. When the core then enters saturation, the initial value of the flux is obtained by inserting the modified differential current at the start of saturation into the magnetization cure. Thereafter, the actual core flux is then derived and used in conjunction with the magnetization curve to calculate the magnetizing current. A modified differential current is then derived that compensates for the core-loss and magnetizing currents. The performance of the proposed differential relay was compared against a conventional differential relay. Results indicate that the modified relay remained stable during severe magnetic inrush and over-excitation because the exciting current was successfully compensated. This paper concludes by implementing the relay on a hardware platform based on a digital signal processor. The relay discriminates magnetic inrush and over-excitation from an internal fault and is not affected by the level of remanent flux.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1597-1604
• /
• 2005

The identification of a moving noise source is important in reducing the source power of the transport systems such as airplanes or high speed trains. However, the direct measurement using a microphone running with noise source is usually difficult due to wind noise, white the source motion distorts the frequency characteristics of the pass-by sound measured at a fixed point. In this study the relationship between the spectra of the source and the pass-by sound signal is analyzed for an acoustic source moving at a constant velocity. Spectrum of the sound signal measured at a fixed point has an integral relationship with the source spectrum. Nevertheless direct conversion of the measured spectrum to the source spectrum is ill-posed due to the singularity of the integral kernel. Alternatively a differential equation approach is proposed, where the source characteristics can be recovered by solving a differential equation relating the source signal to the distorted measurement in time domain. The parameters such as the source speed and the time origin, required beforehand, are also determined only from the frequency-phase relationship using an auxiliary measurement. With the help of the regularization method, the source signal is successfully recovered. The effects of the parameter errors to the estimated frequency characteristics of the source are investigated through numerical simulations.

• 대한임베디드공학회논문지
• /
• 제14권1호
• /
• pp.33-41
• /
• 2019

We propose an embedded solution to design a high-speed and high-accuracy 16bit analog-digital signal processing interface for the control systems using various external analog signals. Choosing TMS320F28377D micro controller unit (MCU) featuring high-performance processing in the 32-bit floating point operation, low power consumption, and various I/O device supports, we design and build the proposed system that supports both 16-bit analog-digital converter (ADC) interface and high precision digital-analog converter (DAC) interface. The ADC receives voltage-level differential signals from fully differential amplifiers, and the DAC communicates with MCU through 50 MHz bandwidth high-fast serial peripheral interface (SPI). We port the boot loader and device drivers to the implemented board, and construct the firmware development environment for the application programming. The performance of the entire implemented system is demonstrated by analog-digital signal processing tests, and is verified by comparing the test results with those of existing similar systems.

• ETRI Journal
• /
• 제26권6호
• /
• pp.635-640
• /
• 2004

A new low-complexity differential detection technique, fractional multi-bit differential detection (FMDD), is proposed in order to improve the performance of continuous phase modulation (CPM) signals such as Gaussian minimum shift keying (GMSK) and Gaussian frequency shift keying (GFSK). In comparison to conventional one-bit differential detected (1DD) GFSK, the FMDD-employed GFSK provides a signal-to-noise ratio advantage of up to 1.8 dB in an AWGN channel. Thus, the bit-error rate performance of the proposed FMDD is brought close to that of an ideal coherent detection while avoiding the implementation complexity associated with the carrier recovery. In the adjacent channel interference environment, FMDD achieves an even larger SNR advantage compared to 1DD.

• Journal of information and communication convergence engineering
• /
• 제14권2호
• /
• pp.106-114
• /
• 2016

Differential sensing methods are more effective in alleviating panel noise than single-line sensing, and thus have been increasingly used in the touch screen industry. However, they have a drawback: they tend to cancel out multiple touches and need touch position recovery algorithms. This paper introduces a novel algorithm of touch position recovery for differential sensing, which is a low-complexity but high-accuracy approach for determining multiple touch positions. We have implemented the proposed method in a touch screen controller system on a chip. In the simulation experiments using realistic touch screen models and a differential sensing circuit, the algorithm exhibited a high detection performance of a signal-to-noise ratio gain of up to 52.21 dB. Therefore, we can conclude that the proposed method is substantially more accurate than the previous method. Further, the proposed method incurs little or no overhead in terms of the detection speed and the chip size.

• 한국통신학회논문지
• /
• 제18권4호
• /
• pp.591-601
• /
• 1993

본 논문에서는 기존 차동 복조기의 k개의 연속적인 출력과 k비트 지연된 차동 복조기 출력간의 관계를 MSK 및 GMSK 시스팀에 대하여 고찰하였다. MSK 및 GMSK 의 신호에 대한 k비트 지연 회로를 사용한, k차 복조기의 출력은 기존 차동 복조기의 k개의 연속적인 출력의 곱이다. 이를 수학적인 과정을 통하여 증명하였으며 이러한 관계를 이용하여 Makrakis가 제시한 2비트 지연기를 사용하여 성능을 개선시킬 수 있는 수신기구조를 임의의 비트 지연기를 사용할 수 있는 수신기 구조를 일반화시켰다. 제안된 방식의 오율 성능을 컴퓨터 시뮬레이션을 행하였으며 성능 개선이 됨을 알 수 있었다.