• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1736-1737
• /
• 2011

This paper deals with the problem of precise impact angle control of an actual homing missile guided by biased proportional navigation (BPN). To do this, the BPN guidance loop including dynamic lag is modeled as the confluent hyper-geometric differential equation and its analytic solution is derived. Based on the solution, a systematic way to determine the bias constant is newly devised. Different from the existing BPN solution obtained by ignoring the dynamic lag, the proposed one can exactly describe the behavior missile before target interception. hence it is drastically improved the angle constrained terminal guidance performance.

• 한국주거학회논문집
• /
• 제14권6호
• /
• pp.51-58
• /
• 2003

When apartment buildings are builed and re-builded, they tends to be taller. This tendency causes the problems for solar access and view in the neighboring area. So the impact factor of sunlight and view by apartment building in its neighboring area is examined. The results of this study are as follows： When analyzing sky view by dividing the sky vault into the differential area, the analysis of view can be efficient. The shorter the apartment building, the more the continuous solar access time. And the taller the building, the more the accumulated solar access time. As the height of building is taller and it is farther from the border of apartment building, view ratio, sky view ratio, and form ratio are increased. It implies that the slimmer the building, the more the visual environment can be improved.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.281-288
• /
• 2001

In order to evaluate the effect of impact load at support stiffness transition area, the field estimations are performed at the transition zone between earthwork and bridge on test operation of KTX. Due to differential settlement caused by the variations of track support stiffness, large impact forces are investigated. However, the measured values such as wheel load, rail stress, displacement and acceleration in the transition area shows that the stiffness changes in the transition area are not abrupt, and the stiffness in the infra track structure varies continuously. In this experimental study, the parameters influencing safety of transition area are not governed by partial or local stiffness because cumulative passing loads are not sufficient on test operation of KTX.

• 한국건축시공학회지
• /
• 제12권5호
• /
• pp.460-467
• /
• 2012

When recycled aggregate with old mortar and particles is used in concrete mixing, such aggregates can affect hydration reaction by promoting or inhibiting it. In this study, the possibility of hydration reaction on old mortar and particle was analyzed. Hydration reaction was carried out in old mortar that is finely crushed by an impact machine in the production of recycled aggregates, and it was found that this did have an impact on the strength development of concrete. Unlike in old cement, the hydration reaction did not progress in the particles, and it had high amounts of silica powder and calcium carbonate. In conclusion, the old mortar can have the influence of improving compressive strength, but the particles can delay the setting time of recycled aggregate concrete.

• Structural Engineering and Mechanics
• /
• 제88권2호
• /
• pp.109-115
• /
• 2023

In this paper, frequencies of zigzag structure of carbon nanotubes isinvestigated based on Donnell shell theory. These tubes are wrapped with the ring supports in the axial direction. The fundamental frequency curves displayed in article show the dependence of vibrations attributes to zigzag single walled carbon nanotubes. Various zigzag indices are introduced against the variation of length to predict the vibration. Also, the influence of ring supports is sketched with proposed structure for frequency analysis. The frequencies of zigzag tube decreases as the length increases. It is observed that the frequencies decreases with ring support and have higher frequencies without ring. The problem is formulated using Partial Differential Equation. Three expressions of modal deformation displacement functions is used for the elimination of temporal variation to form the solution in the eigen from. For the stability of present study the results are compared with experimentally and numerically in the open text.

• 정보보호학회논문지
• /
• 제32권3호
• /
• pp.465-475
• /
• 2022

코로나19의 영향으로 사람들은 편리함, 건강 등에 관심을 두게 되었고, 이를 도와주는 IoT 기기의 사용량은 늘어나고 있다. 리소스가 제한적이지만 민감한 정보를 다뤄야 하는 IoT 기기들에 경량 보안요소를 내장하기 위해서는 경량 S-box의 개발이 필수적이다. 2021년 이전까지 경량 4-bit S-box는 휴리스틱 방법으로 개발하고, 더 큰 크기의 경량 S-box는 확장구조 혹은 같은 연산을 반복하여 개발하는 것이 일반적이었다. 그러나 2022년 1월, MISTY 확장구조로 생성한 S-box보다 더 좋은 차분 균일성(Differential uniformity)과 선형성(Linearity)을 갖는 8-bit S-box를 찾을 수 있는 휴리스틱 알고리즘을 제안한 논문이 게재되었다[1]. 해당 논문에서 제안한 휴리스틱 알고리즘은 AND 연산자를 한 개씩 추가하면서 S-box를 생성하는데, AND 연산자를 추가할 때마다 차분 균일성을 계산하여 원하는 기준에 도달할 수 없는 S-box를 사전에 제거하는 방식을 사용한다. 본 논문에서는 이 휴리스틱 알고리즘의 성능을 향상한다. 차분 균일성뿐만 아니라 또 다른 차분성질을 사용하여 사전제거하는 양을 늘리고, 선형성을 계산하여 사전제거하는 프로세스를 추가함으로써 차분안전성뿐만 아니라 선형안전성까지도 동시에 만족할 수 있게 한다.

• 한국산학기술학회논문지
• /
• 제13권2호
• /
• pp.919-925
• /
• 2012

광학 이성질체인 PLLA와 PDLA를 전 조성에서 블렌드하여 PLA stereocomplex(SC)를 제조하였고 DSC를 통해 PLLA matrix안의 SC결정 형성 정도를 파악하였다. 결과적으로 PLA SC blend의 PDLA 함량이 SC 결정 생성 정도에 영향을 주며 PLLA/PDLA=50/50의 조성일 때 가장 많은 SC 결정이 생성되었다. 더 나아가 고유의 낮은 충격강도를 보강하기 위하여 PLLA/PDLA=92/8, 85/15 조성에서 충격보강제(Impact modifiers)를 도입하였다. 제조된 PLA SC/Impact modifiers의 열적기계적 성질은 DSC, HDT, Izod Impact tester, UTM을 통해 측정하였다. DSC 측정 결과 PLA SC 결정은 Strong120(Impact modifier)가 10-20wt% 도입되면 감소하는 경향을 보이나 반면에 Elvaloy가 도입될 때에는 아무런 영향을 주지 않는 것으로 관찰되었다. HDT의 값은 PDLA의 도입에 따라 급격하게 $100^{\circ}C$이상으로 증가하였다. 하지만 Strong120과 Elvaloy가 도입됨에 따라 감소하는 경향을 보였다. 결국 Toughening된 PLA SC에서 10wt%의 Impact modifier를 blend하여 가장 최적의 충격강도와 굴곡탄성율을 갖는 물성을 발견할 수 있었다.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.813-821
• /
• 2002

Glass fiber reinforced PET matrix composite was manufactured by rapid press consolidation technique as functions of temperature, pressure and time in pre-heating, consolidation and solidification stages. The optimal manufacturing conditions for this composite were discussed based on the void content, tensile, interlaminar shear and impact properties. In addition, the levels of crystallinity with various manufacturing conditions were measured using differential scanning calorimetry to investigate the mechanical properties of this composite material as a function of crystallinity. Among many processing parameters, the mold temperature and the cooling rate after forming were found to be the most critical factors in determining the level of crystallinity and mechanical properties. The level of crystallinity affects the tensile properties to some degree. However, impact properties are affected much more. It also affects the degree of ductility, which determines the impact energy of this material.

• Structural Engineering and Mechanics
• /
• 제14권5호
• /
• pp.611-624
• /
• 2002

In this paper, a complete solution is presented for dynamic plastic response of a rigid, perfectly plastic hinged-free beam, of which one end is simply supported or hinged and the other end free, subjected to a transverse strike by a travelling mass at an arbitrary location along its span. The governing differential equations are expressed in non-dimensional forms and solved numerically to obtain the instantaneous deflection of the beam and the plastic dissipated energy in the beam. The dynamic behavior for a hinged-free beam is more complicated than that of a free-free beam. It transpires that the mass ratio and impact position have significant influence on the final deformation. In the aspect of energy dissipation, unlike simply supported or clamped beams for which the plastic deformation consumes almost the total input energy, a considerable portion of the input energy would be transferred as rigid-body motion of hinged-free beam, and the energy dissipated in its plastic deformation is greatly reduced.

• 한국생활과학회지
• /
• 제15권6호
• /
• pp.1025-1035
• /
• 2006

Brand Relationship Quality(BRQ) reflects the intensity and viability of the enduring association between a consumer and a brand so it is assumed to be the indicator which can affect brand performance such as brand satisfaction, brand attitude, and brand loyalty. The purpose of this study is to analyze the structural equation model showing the path between BRQ and brand performance. The subjects were women in their 20s to 40s living in Seoul and other metropolitan areas. 482 copies of questionnaire were analyzed by reliability, Pearson's correlation analysis, confirmatory factor analysis using SPSS 11.0 Package and AMOS 5.0 Package. The results showed that BRQ had positive influence on the brand performance-brand satisfaction, brand attitude, brand loyalty. As for the total effect about brand loyalty, BRQ was the most influential variable compared with other variables- brand satisfaction, brand attitude. The indirect impact of BRQ on brand loyalty is bigger than the direct impact of BRQ and brand satisfaction emerged as the important intermediate variable between BRQ and brand loyalty. Therefore, effective marketing strategy can be accomplished according to differential impact of the BRQ facets to induce consumer's satisfaction, which can lead to brand loyalty.