• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제9권2호
• /
• pp.45-53
• /
• 2005

This paper investigates the influence of thermal conductivity and variable viscosity on the problem of micropolar fluid in the presence of suction or injection. The fluid viscosity is assumed to vary as an exponential function of temperature and the thermal conductivity is assumed to vary as a linear function of temperature. The governing fundamental equations are approximated by a system of nonlinear ordinary differential equations and are solved numerically by using shooting method. Numerical results are presented for the distribution of velocity, microrotation and temperature profiles within the boundary layer. Results for the details of the velocity, angular velocity and temperature fields as well as the friction coefficient, couple stress and heat transfer rate have been presented.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2001년도 연료전지심포지움 2001논문집
• /
• pp.189-192
• /
• 2001

In order to prepare the proton-conducting membrane with lower cost and higher ionic conductivity than commercialized one, the concept of incorporating the nitrogen acid to polymer backbone, is proposed. The synthesis, thermal, and temperature-variable impedance/electrical conductivity studies of poly (p-tolunesulfonylamido acrylate) are reported. This polymer can be prepared by reacting poly (acryloyl chloride) with ptolunesulfonamide and cast into homogeneous membranes. Thermogravimetric analysis (TGA) shows that the polymer is thermally stable up to about $200^{\circ}C$ and Differential scanning calorimetry (DSC) illustrates that the glass transition occur at around $67^{\circ}C$. The ionic conductivity measured by dielectric spectroscopy is in the range of $10^{-5}\;S/cm$ in dry atmosphere that it can be a candidate for the membrane of PEMFC or DMFC.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 1997년도 추계학술대회 발표논문집:21세기를 향한 정보통신 기술의 전망
• /
• pp.451-462
• /
• 1997

A 2-dimensional numerical analysis is presented for thermal-electron heat conduction effects upon the electron transport and the drain current-voltage characteristics of submicron GaAs MESFETs, based on the use of a nonstationary hydrodynamic transport model. It is shown that for submicron GaAs MESFETs, electron heat conduction effects are significant on their internal electronic properties and also drain current-voltage characteristics. Due to electron heat conduction effects, the electron energy is greatly one-djmensionalized over the entire device region. Also, the drain current decreases continuously with increasing thermal conductivity in the saturation region of large drain voltages above 1 V. However, the opposite trend is observed in the linear region of small drain voltages below 1 V. Accordingly, for a large thermal conductivity, negative differential resistance drain current characteristics are observed with a pronounced peak of current at the drain voltage of 1 V. On the contrary, for zero thermal conductivity, a Gunn oscillation characteristic is observed at drain voltages above 2 V under a zero gate bias condition.

• Bulletin of the Korean Chemical Society
• /
• 제20권11호
• /
• pp.1329-1334
• /
• 1999

The curing characteristics of diglycidyl ether of bisphenol A (DGEBA) with diaminodiphenylmethane (DDM) as a curing agent were studied using differential scanning calorimetry (DSC), rheometrics mechanical spectrometry (RMS), and dielectric analysis (DEA). The isothermal curing kinetics measured by DSC were well represented with the generalized auto-catalytic reaction model. With the temperature sweep, the inverse relationship between complex viscosity measured by RMS and ionic conductivity obtained from DEA was established indicating that the mobility of free ions represented by the ionic conductivity in DEA measurement and the chain segment motion as revealed by the complex viscosity measured from RMS are equivalent. From isothermal curing measurements at several different temperatures, the ionic conductivity contribution was shown to be dominant in the dielectric loss factor at the early stage of cure. The contribution of the dipole relaxation in dielectric loss factor became larger as the curing further proceeded. The critical degrees of cure, at which the dipolar contribution in the dielectric loss factor starts to appear, increases as isothermal curing temperature is increased. The dielectric relaxation time at the same degree of cure was shorter for a sample cured at higher curing temperature.

• 터널과지하공간
• /
• 제13권1호
• /
• pp.44-51
• /
• 2003

응력 재분포에 의해 발생하는 수리전도도의 변화를 평가하기 위하여 변형률 의존 수리전도도 변화방정식을 사용하였다. 주요 입력 변수는 탄성계수 감소비와 응력 재분포에 의해 발생한 변형률이다. 무결암에서부터 완전히 파쇄된 암반조건을 나타내기 위하여 탄성계수 감소비 대신에 탄성계수 감소비와 RMR간의 상관관계를 이용하였다. 전단 변형에 따른 팽창이 수리전도도의 증가에 영향을 미치지만 그 영향 정도는RMR에 따라 달라졌으며, 인장변형률이 절리에 작용하는 경우 암반의 RMR이 감소함에 따라 수리전도도는 증가하는 것으로 나타났다. 암반에 작용하는 응력 상태에 따라 수리전도도의 변화도 다른 것으로 나타났는데, 수평응력 대 수직응력의 비가 다른 이방성 응력 상태가 수리전도도의 변화에 가장 큰 영향을 미치는 것으로 나타났다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 춘계학술대회 논문집
• /
• pp.19-24
• /
• 2005

To improve mean-life and reliability of power cable, we have investigated specific heat (Cp) and thermal conductivity of XLPE insulator and semiconductive materials in 154kV underground power transmission cable. Specimens were respectively made of sheet form with EVA, EEA and EBA added 30wt%, carbon black, and the other was made of sheet form by cutting XLPE insulator in 154kV power cable. Specific heat (Cp) and thermal conductivity were· measured by DSC (Differential Scanning Calorimetry) and Nano Flash Diffusivity. Specific-heat measurement temperature ranges of XLPE insulator were from 20[$^{\circ}C$] to 90[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity were 25[$^{\circ}C$}], 55[$^{\circ}C$] and 90[$^{\circ}C$]. In case of semiconductive materials, the measurement temperature ranges of specific heat were from 20[$^{\circ}C$] to 60[$^{\circ}C$], and the heating rate was 1[$^{\circ}C$/min]. And the measurement temperatures of thermal conductivity were 25[$^{\circ}C$] and 55[$^{\circ}C$]. From these experimental results, both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권1호
• /
• pp.6-10
• /
• 2006

To improve mean-life and reliability of power cable, we have investigated specific heat (Cp) and thermal conductivity of XLPE insulator and semiconducting materials in 154(kV) underground power transmission cable. Specimens were respectively made of sheet form with EVA, EEA and EBA added $30[wt\%],$ carbon black, and the other was made of sheet form by cutting XLPE insulator in 154(kV) power cable. Specific heat (Cp) and thermal conductivity were measured by DSC (Differential Scanning Calorimetry) and Nano Flash Diffusivity. Specific-heat measurement temperature ranges of XLPE insulator were from $20[^{\circ}C]\;to\;90[^{\circ}C],$ and the heating rate was $1[^{\circ}C/mon].$ And the measurement temperatures of thermal conductivity were $25[^{\circ}C],\;55[^{\circ}C]\;and\;90[^{\circ}C].$ In case of semiconducting materials, the measurement temperature ranges of specific heat were from $20[^{\circ}C]\;to\;60[^{\circ}C],$ and the heating rate was $1[^{\circ}C/mon].$ And the measurement temperatures of thermal conductivity were $25[^{\circ}C],\;55[^{\circ}C].$ In addition we measured matrix of semiconducting materials to show formation and growth of carbon black in base resins through the SEM. From these experimental results, both specific heat and thermal conductivity were increased by heating rate because volume of materials was expanded according to rise in temperature.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.57-62
• /
• 2010

The lithium ion concentration dependant ionic conductivity and thermal properties of poly(ethylene glycol) methyl ether methacrylate (PEGMA)/acrylonitrile-based copolymer electrolytes with $LiClO_4$ have been studied by differential scanning calorimetry (DSC), linear sweep voltammetry (LSV) and AC complex impedance measurements. In systems with 11 wt% of acrylonitrile all liquid electrolytes were obtained regardless of lithium ion concentration. Complex impedance measurements with stainless steel electrodes give ambient ionic conductivities $8.1\times10^{-6}\sim1.4\times10^{-4}S cm^{-1}$. On the other hand, a hard and soft films at ambient temperature were obtained in copolymer electrolyte system consists of 15 wt% acrylonitrile with 6 : 1 and 3 : 1 of [EO] : [Li] ratio, respectively. DSC measurements indicate the crystalline melting temperature of poly(PEGMA) disappeared completely after addition of $LiClO_4$ in this system due to the complex formation between ethylene oxide (EO) unit and lithium salt. As a result, free standing film with room temperature ionic conductivity of $1.7\times10^{-4}S cm^{-1}$ and high electrochemical stability up to 5.5V was obtained by controlling of acrylonitrile and lithium salt concentration.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제5C권3호
• /
• pp.89-96
• /
• 2005

To improve the mean-life and reliability of power cables, we have investigated the volume resistivity and thermal properties demonstrated by changing the content of carbon black, an additive of the semiconductive shield for underground power transmission. Nine specimens were made of sheet form for measurement. Volume resistivity of the specimens was measured by a volume resistivity meter after 10 minutes in a preheated oven at temperatures of both 25$\pm$1[$^{\circ}C$] and 90$\pm$ 1[$^{\circ}C$]. As well, specific heat (Cp) and thermal conductivity were measured by Nano Flash Diffusivity and DSC (Differential Scanning Calorimetry). The ranges of measurement temperature were from 0[$^{\circ}C$] to 200[$^{\circ}C$], and heating temperature was 4[$^{\circ}C$/min]. From these experimental results, volume resistivity was high according to an increase of the content of carbon black. Specific heat was decreased, while thermal conductivity was increased according to a rise in the content of carbon black. Furthermore, both specific heat and thermal conductivity were increased by heating temperature because the volume of materials was expanded according to a rise in temperature.

• Composites Research
• /
• 제30권6호
• /
• pp.350-355
• /
• 2017

Phenylcyclohexyl (PCH) mesogen을 diglycidyl terephthalate의 2,5 위치에 치환시킨 새로운 액정성 에폭시 수지를 설계하였다. 이 물질의 액정성은 DSC(differential scanning calorimetry)와 POM(polarized optical microscopy)으로 분석하였다. 모든 액정성 에폭시 유도체는 가열 및 냉각 시에 모두 smectic상을 나타내는 enantiotropic한 성질을 나타내었다. 액정성 에폭시의 공융 혼합물을 통하여 액정 온도구간을 확장시켰다. 경화된 신규 액정성 에폭시는 $0.4W{\cdot}m^{-1}{\cdot}K^{-1}$의 높은 열전도도를 나타냈다. 높은 열전도도를 갖는 신규 액정성 에폭시는 전자 및 디스플레이용 복합소재로 이용될 것으로 기대된다.