• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.3 no.1
• /
• pp.27-34
• /
• 2009

Hearing impaired person's hearing loss has personally various shape, so existing symmetrical auditory filter of frequency band method wasn't properly simulated the hearing impaired person's various hearing loss shape. The shapes of auditory filter are asymmetrical different with each center frequency and each input level. Hearing impaired person which has hearing loss was differently changed with that of normal hearing people and it has different value for speech of quality through auditory filter. In this study, the asymmetrical auditory filter was simulated and then some tests to estimate the filter's performance objectively were performed. The experiment as simulated auditory filter's performance evaluation method used perceptual evaluation of speech quality (PESQ) and log likelihood ratio (LLR) for speech through auditory filter. In the test, processed speech was evaluated objective speech quality and distortion using PESQ and LLR value. When hearing loss processed, PESQ and LLR value have big difference between symmetrical and asymmetrical auditory filter. It means that the difference of the shape auditory filter may affect to speech quality. Especially, when hearing loss existed, auditory filter changing according to asymmetrical shape for each center frequency affected to perceive speech quality of the hearing impaired.

• Korean Journal of Agricultural Science
• /
• v.26 no.1
• /
• pp.21-30
• /
• 1999

To increase the strength properties of recycled fiber, especially OCC (Old Corrugated Container) in this study, we used the mechanical pretreatment on the fibers before refining. The mechanical action in the Hobart mixer induced high shear and compression on the fibers, which resulted in the breakdowns of fiber internal structure, and microcompressions on the surface of the fibers. We evaluated the degree of mechanical treatment by fiber curl index. Four different refining techniques were applied to the pretreated fibers (Valley beater, Kady mill, PFI mill, and Impact refining) to find the best combination of the pretreatment and the refining methods. Conclusions were summarized as followed. 1. In keeping the fiber length from shortening, Kady mill and PFI mill refining were effective. Kady mill and Valley beater application tended to straighten out the fiber shapes. 2. Valley beating increased the breaking length of the handsheets better than other methods, while lowering the tear strength most. The mechanical pretreatment increased breaking length about 10% in average irrespective of four different refining methods. 3. Tear strength was increased by the mechanical pretreatment and by the PFI mill refining. 4. Burst strength was increased by the mechanical pretreatment and by valley beating method. 5. In increasing the breaking length and burst strength while keeping tear strength, combination of mechanical pretreatment and Valley beating were most effective.

• Korean Journal of Ichthyology
• /
• v.27 no.1
• /
• pp.26-32
• /
• 2015

The histological structure of the heart in Pseudorasbora parva was investigated by light microscope. The heart consisted of four consecutive chambers, the sinus venosus, atrium, ventricle and bulbus arteriosus. The wall of the sinus venosus was divided into endocardium, myocardium and epicardium, and the walls of the atrium and ventricle were divided into endocardium, subendocardium, myocardium, subepicardium and epicardium, and the wall of the bulbus arteriosus was divided into endocardium, subendocardium (ridge tissue), middle layer, subepicardium and epicardium. The valves were observed in the sinoatrial, artrioventricular and bulboventricular junctions. The sinus venosus wall was mostly made up of collagen. The rings of tissue were observed at the sinoatrial junction. The atrium was composed of a spongy trabeculate myocardium surrounded by an external rim of thin myocardium, and collagens were distributed in the subepicardium and trabeculae. The ventricle was a spongy myocardium with vessels in subepicardium. In the subepicardium and trabeculae of the ventricle, collagens were distributed. In the bulbus arteriosus, the diameter and length of the ridges were differed. The endocardial cells were convex and the non-clustered subendocardial cells showed irregular shapes. The cells of the middle layer were arranged into incomplete layers that showed different orientations. The subepicardium was formed by cells of different morphology. Collagens and elastins were demonstrated in the subendocardium, middle layer and subepicardium of the bulbus arteriosus. The epicardium was a single layer composed of flattened cells.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.47 no.2
• /
• pp.188-195
• /
• 2020

This study is aimed to evaluate and compare the surface roughness and microbial adhesion to alkasite restorative material (Cention N), resin-modified glass ionomer (RMGI), and composite resin. And to examine the correlation between bacterial adhesion and surface roughness by different finishing systems. Specimens were fabricated in disk shapes and divided into four groups by finishing methods (control, carbide bur, fine grit diamond bur, and white stone bur). Surface roughness was tested by atomic force microscope and surface observation was performed by scanning electron microscope. Colony forming units were measured after incubating Streptococcus mutans biofilm on specimens using CDC biofilm reactor. Cention N surface roughness was less than 0.2 ㎛ after finishing procedure. Control specimens of resin and Cention N specimens were significantly (p = 0.01) rougher. Pearson correlation coefficient (PCC = 0.13) indicated a weak correlation between surface roughness and S. mutans adhesion to the specimens. Compared with resin specimens, RMGI and Cention N showed lower microbial adhesion. Surface roughness and bacterial adhesion were not significantly different, regardless of the finishing systems.

• Korean Journal of Social Welfare
• /
• v.60 no.1
• /
• pp.127-157
• /
• 2008

The purpose of the current research is to reconstruct the 'structure of biographical processes' on the lives of the elderly couples residing in the rural area in terms of 'gender relations.' Autobiographical-narrative interviews with each of the six elderly couples were conducted. Interview data were analyzed through the eclectic application of $Sch\ddot{u}tze's$ autobiographical-narrative interview and Dausien's feministic biographical research methods. Research findings revealed that each biography of the elderly couples represents the 'structure of biographical process' that shapes 'trajectories.' Such 'trajectories' were found to characterize two dimensions of 'gender relations'. First, on the micro- and macro-levels of 'trajectories,' 'gender relations' were noticed. The 'trajectories' of the male elderly were found to be both in personal and familial contexts and in socio-structural context, while those of the female elderly were found to be mostly in personal and familial contexts. Second, on the micro-level of 'trajectories,' 'gender relations' were noticed. The male elderly were more or less different from one another, contingent on the phases of life. They turned out to take simple roles of performing 'outdoor duties' and to be passive in doing 'housework.' Contrary to the male elderly, the female counterparts proved to actively assume 'dual roles' in 'family affairs' and 'outdoor duties'. Such findings led to the observation of 'doing gender' in the biographies of the elderly and, furthermore, to capturing the fact that 'doing gender' is different, depending on the phases of life and sex. Finally, some implications for practice were drawn from the current findings with special reference to biography and gender relations.

• Journal of Energy Engineering
• /
• v.8 no.2
• /
• pp.298-308
• /
• 1999

Experimental study on characteristics of direct contact condensation of steam discharged into a sub-cooled water pool has been performed using five different sizes of horizontal nozzle over a wide range of steam mass fluxes and pool temperatures. Steam condensation phenomena have been observed visually and by taking pictures of steam jets using a high speed video camera. Two different steam jet shapes such as ellipsoidal shape and conical shape were typically observed for a stable steam jet, depending on the steam mass flux and pool temperature. The steam jet expansion ratio and the steam jet length as well as the condensation heat transfer coefficients were determined. The effect of steam mass flux, pool temperature, and nozzle diameter on these parameters were also discussed. Empirical correlations for the steam jet lengths and the condensation heat transfer coefficients as a function of steam mass flux and condensation driving potential were established. The axial and radial temperature distributions in steam jet and in surrounding water were measured. The effect of steam mass flux, pool temperature, and nozzle diameter were also discussed. The condensation regime map, which consists of six regimes such as chugging, transient chugging, condensation oscillation, stable condensation, bubble condensation oscillation, and intermittent oscillation condensation, were established. In addition, the dynamic pressures at the pool wall were measured. The close relation of dynamic pressure and steam condensation mode, which is also dependent on steam mass flux and pool temperature, was found.

• 대한공업교육학회지
• /
• v.34 no.2
• /
• pp.331-345
• /
• 2009

In this research Sagnac interferometer three different types of mandrel are suggested and this fiber optic sensor is using in monitoring of electric transformer. Vibration characteristics of those mandrels were analyzed and finally more sensitivity mandrel are suggested. Three different mandrels using in fiber optic sensor are hollow cylinder with outer bump, pure hollow cylinder, hollow cylinder with inner bump. Natural frequencies and mode shapes are investigated using finite element method. Mode shape are considered at the frequency range from 2 kHz to 20 kHz. Fundamental dimensions of the hollow cylinder type's mandrel are 30 mm in outer diameter, 50 mm in length, 1 mm in cylinder thickness, $2mm{\times}2mm$ in bump size. Based on the finite element results, when the outer acoustic frequency is near 11 kHz outer bump type and hollow cylinder can get higher sensitivity. Near 17 kHz outer bump and inner bump mandrel can get higher sensitivity. Near 20 kHz hollow cylinder and inner bump mandrel is useful. This results can be applied to design of fiber optic sensor using in monitoring the electrical transformer. Several MHz of outer acoustic frequency can be easily detected using more sensitive mandrel in pursuing expand this technique.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.13-20
• /
• 2017

High-rise building shapes are changing from orthogonal to irregular form and the current trend is to arrange members in geometric grid-patterns at the perimeter of buildings. This study proposes a simple model for the preliminary design of a hexagrid high-rise building. The size of the cross section is set to be different at each module and hexagrid unit, which is different from the previous studies in which all hexagrid members were the same. To examine the effect of hexagrid size on structural performance, 60-story hexagrid buildings with 1-, 2- and 4-story high modules are designed and analyzed. Maximum lateral displacement, steel tonnage, load carrying percentage of perimeter frame and combined strength ratio are compared for 15 buildings. As the lateral load carrying capacity of hexagrid structure was inferior to a diagrid structural system, proper lateral stiffness should be allocated to the core frame in a hexagrid structure. The best ratio of flexural to shear deformation was 4 and larger unit size was better in considering constructional cost and structural efficiency. As the maximum lateral displacements of the buildings were within 84%~108% of the limit, the proposed method seems to be applicable to preliminary design of hexagrid buildings.

• The Journal of Korean Medicine
• /
• v.27 no.2 s.66
• /
• pp.145-154
• /
• 2006

Objectives : Methods to evaluate obesity are growing to be important in studying links between health and disease. Physicians are using BMI (body mass index) to evaluate obesity, but they can't know how much fat the body has by using that method. Even though there are several assessments, there are different scales, so patients are diagnosed as obese, by some but not by others. These studies are limited in evaluating obesity; it is necessary to study based on new knowledge. According to Oriental Medical Theory, obese people are categorized into 3 types, Fei, Kao and Liu Ren. They have different pathology and body shapes than non-obese people. The relationship between Oriental Medical Theory and BMI and assessment of body fat is a fundamental need to easily approach and treat obesity. Methods : At 00 Oriental Medical Center, 145 female subjects who intended to lose weight were given physical tests and grouped into 5 types of obesity. The physical tests were height measurement, BMI, body composition (body fat mass and lean body mass), skin elasticity and physical strength tests. One-way analysis of variance was done to compare the means of physical tests between the five types of obese women. There was some relationship between characteristics of the five types based on physical tests and Fei, Kao and Liu Ren based on Oriental Medical Theory. Least significant difference (LSD) was used in multiple comparisons. Results : 1. According to the skin elasticity test, obesity type 5 placed between obesity types 3 and 4 and obesity types 1 and 2. Obesity types 3 and 4 were in the low skin elasticity result group; obesity types 1 and 2 were in the high ones (p<0.1).Based on Oriental Medical Theory, Fei Ren and Kao Ren can be distinguished by skin elasticity degree. This result should form the basis of obesity diagnosis. 2. According to Oriental Medical Theory, Fei Ren is smaller than others. Based on height measurement, obesity types 3 and 4 were significantly lower than other obesity types (p<0.1), so there is a relationship between Fei Ren and obesity types 3 & 4. 3. There were significant differences between obesity type 2 and obesity type 4 in the body fat mass result (p<0.1). This study did not have large enough a sample size to distinguish Liu Ren. Conclusions : Further clinical research is necessary to study measurement methods of body shape type and skin elasticity for distinguishing Fei Ren from Kao Ren. The diagnosis and treatment based on the relationship of these types should be studied further.

• Atmosphere
• /
• v.20 no.1
• /
• pp.37-47
• /
• 2010

The methods measuring the precipitation drop size distribution(hereafter referred to as DSD) at Cloud Physics Observation System (CPOS) in Daegwallyeong are to use PARSIVEL (PARticle SIze and VELocity) disdrometer (hereafter referred to as PARSIVEL) and Micro Rain Radar (hereafter referred to as MRR). First of all, PARSIVEL and MRR give good correlation coefficients between their rain rates and those of rain gage: $R^2=0.93$ and 0.91, respectively. For the DSD, the rain rates are classified in 3 categories (Category 1: rr (Rain Rate) ${\leq}0.5\;mm\;h^{-1}$, Category 2: $0.5\;mm\;h^-1$ < rr < $4.0\;mm\;h^{-1}$, Category 3: rr ${\geq}4\;mm\;h^{-1}$). The shapes of PARSIVEL and MRR DSD are relatively most similar in category 2. In addition, we retrieve the vertical rain rate and liquid water content from MRR under melting layer, calculated by Cha et al's method, in Daegwallyeong ($37^{\circ}41{\prime}N$, $128^{\circ}45^{\prime}E$, 843 m ASL, mountain area) and Haenam ($34^{\circ}33^{\prime}N$, $126^{\circ}34^{\prime}E$, 4.6 m ASL, coast area). The vertical variations of rain rate and liquid water content in Daegwallyeong are smaller than those in Haenam. We think that this different vertical rain rate characteristic for both sites is due to the vertical different cloud type (convective and stratiform cloud seem dominant at Haenam and Daegwallyeong, respectively). This suggests that the statistical precipitation DSD model, for the application of weather radar and numerical simulation of precipitation processes, be considered differently for the region, which will be performed in near future.