• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.36-43
• /
• 2010

In present work, amorphous TiCuNi powders were fabricated by mechanical alloying process. Amorphization and crystallization behaviors of the TiCuNi powders during high-energy ball milling and subsequent microstructure changes were studied by X-ray diffraction and transmission electron microscope. TEM samples were prepared by the focused ion beam technique. The morphology of powders prepared with different milling times was observed by field-emission scanning electron microscope and optical microscope. The powders developed a fine, layered, homogeneous structure with milling times. The crystallization behavior showed that glass transition, $T_g$, onset crystallization, $T_x$, and super cooled liquid range ${\Delta}T=T_x-T_g$ were 628, 755 and 127K, respectively. The as-prepared amorphous TiCuNi powders were consolidated by spark plasma sintering process. Full densified TiCuNi samples were successfully produced by the spark plasma sintering process. Crystallization of the MA powders happened during sintering at 733K.

• Environmental Engineering Research
• /
• 제19권3호
• /
• pp.293-298
• /
• 2014

An anaerobic photosynthetic treatment process utilizing purple non-sulfur photosynthetic bacteria (PNSB) was applied to the recovery of organic carbon from food processing wastewater. PNSB cells, by-product from the treatment, have high nutrition such as proteins and vitamins which are a good alternative for fish feed. Effects of light source on performance of anaerobic photosynthetic process were investigated in this study. Two bench-scale photo-bioreactors were lighted with infrared light emitting diodes (LEDs) and tungsten lamps covered with infrared transmitting filter, respectively, aiming to supply infrared light for photosynthetic bacteria growth. The photo-bioreactors were operated to treat noodle-processing wastewater for 323 days. Hydraulic retention time (HRT) was set as 6 days. Organic removals in the photo-bioreactor lighted with infrared LEDs (91%-95%) was found higher than those in photo-bioreactor with tungsten lamps with filter (79%-83%). Biomass production in a 150 L bench-scale photo-bioreactor was comparable to a 8 L small-scale photo-bioreactor in previous study, due to improvement of light supply efficiency. Application of infrared LEDs could achieve higher treatment performance with advantages in energy efficiency and wavelength specifity.

• 상하수도학회지
• /
• 제19권2호
• /
• pp.144-148
• /
• 2005

The industrial development of large scale deep bed filters has been a very important step in the process of drinking water production and more recently in the tertiary treatment of wastewater. The target of deep bed filtration is the retention is the retention of small particles generally smaller than 30 microns at relatively small concentration, generally less than 30 mg/l from natural water (surface water or aquifers) or secondary treated wastewater. The relation between the retention efficiency and the characteristics of the particles has been extensively studied experimentally and through different models of retention. During the last years the development of new technologies (fiber filter, membrane modules) lead to more intensive processes compared to conventional sand filtration. Fiber filters can combine intensification with a decrease in specific energy needed however they cannot be operated under gravity like sand filters. Membrane filters (UF or MF) are much more intensive and efficient than sand filters. The specific energy needed is not so high (about $0.1Kwh/M^3$) but is higher than sand or fiber filter. A Life Cycle Analysis (LCA) has to be made for a complete comparison between these technologies taking in account that the efficiency of particle retention obtained by membrane filters is unique.

• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.32-38
• /
• 1998

For the purpose of monitoring the abnormal state in proportion to cutting in automatic production process, the 3 kinds of specimens different from mechanical properties by austempering through temperature variation were manufactured, and the effects of tool wear on thrust and AE RMS was analyzed with sequential drilling in in-process. When the ADI specimens were drilled, the relationship of thrust and AE RMS with flank wear was studied through experiments, and it is confirmed that the reliable wear state is able to be monitored by using these signals. It was shown that thrust and AE RMS increased slowly till flank wear reached to V$_{B}$ = 0.25mm, and they increased steeply over the value. The effective tool exchange time was able to be pre-estimated by using this fact. It was validated that the tool breakage was able to be detected on the real time by monitoring in in-process.s.

• 한국환경교육학회지:환경교육
• /
• 제11권1호
• /
• pp.181-194
• /
• 1998

This study is for rationalizing the collecting system of recycling waste materials in elementary, middle and high school in Incheon. The student participating in collecting system is so much helpful in env. educational aspect, So the students need to be took part in the system. The result on investigating actual condition of the student's participating of schools in Inchon City is not sufficient to be helpful to env. educational effect. 1st. The names of recycling waste can are so various that the students can's understand which can in for Recycling. 2nd. Collecting system is also very different according to schools. 3th. The incentives for student's participating in collecting process are also not sufficient. The conclusion is that the school should provide the students incentives for taking parts in the collecting process, in that actualizing the recycling process is helpful to env. education, and the another one in that we should remove the recycling ideology, which is the some belief, the more production is no problems, if recycling is activated socially. But this idea is evident error. In this aspect the concept of recycling should be changed from re-using to re-turning to nature.

• 소성∙가공
• /
• 제28권5호
• /
• pp.239-246
• /
• 2019

Various surface texturing techniques have been studied because of the effective applicability of micro or nano scale surface patterns. Particularly, the most promising types of patterns include the hierarchical patterns, which consists of micro/nano structures. Different processes such as MEMS, laser machining, micro cutting and micro grinding have been applied in the production of hierarchical patterns on various material surfaces. This study demonstrates the process of hot imprinting to induce the hierarchical patterns on the Al alloy surfaces. Wire electrical discharge machining (WEDM) process was used to imprint molds with micro scale sinusoidal pattern. In addition, the sinusoidal pattern with rough surface morphology was obtained as a result of the discharge craters. Consequently, the hierarchical patterns consisting of the sinusoidal pattern and the discharge craters were prepared on the imprinting mold surface. Hot imprinting process for the Al plates was conducted on the prepared mold, and the replication performance was analyzed. As a result, it was confirmed that the hierarchical patterns of the mold were effectively duplicated on the surface of Al plate.

• 복식문화연구
• /
• 제27권1호
• /
• pp.11-19
• /
• 2019

The mass production after the industrialisation and the fast changing fashion cycles in today's world resulted in buying clothes and home textiles more than we need and discarding them before they complete their life cycles. This causes vast amounts of textile waste that creates environmental issues. Upcycling is the creative process of transforming clothing and textile waste by reusing deadstock or used fabric to create new garments and products. It holds importance in terms of sustainability, reducing waste and environmental pollution. During the process of upcycling, certainly the creativity and innovation are the key words because to reuse a product to a better value needs a creative mind, aesthetic consciousness, innovative look and knowledge and it is quite different from a normal design procedure. There is a delicate level of aesthetics which carries the reused materials to a higher value. The handling of the materials, knowing how to manipulate the waste material, the techniques available to apply to surfaces, the concept of two and three dimension on textiles and clothing, contributions of other branches of art such as sculpture and painting all help the designer to reach a higher aesthetic value in the upcycled product in this process. In the study; it was aimed to raise awareness, to attract attention to sustainable fashion and also to contribute to sustainable development as an upcycling design project realized with students in textile and fashion design education taken as an example.

• 한국응용과학기술학회지
• /
• 제40권6호
• /
• pp.1363-1372
• /
• 2023

This study is concerned with the optimization of the manufacturing process of a hot water extract containing antioxidant activity from Lycium barbarum, traditionally known to have various physiological activities. For the establishment of the optimization process, the central composite design of response surface methodology(RSM) was used. Thirteen extraction processes were performed by encoding the independent variables, extraction temperature (65.9℃-94.1℃) and extraction time (2.59 hr-5.41 hr). As a result of the experiment, the optimal manufacturing conditions for the extract were 340.0 mg/100 g of GAE at an extraction temperature of 94.1℃ and an extraction time of 5 hr. The maximum yield of flavonoids was 22.44 mg/100 g of HES at an extraction temperature of 94.1℃ and an extraction time of 4 hr. The conditions for producing the extract with the maximum antioxidant capacity (DPPH 92.12%) were 90℃ and 4.5 hr extraction time. Therefore, the optimal manufacturing process conditions for extracts containing total phenol content, flavonoid content, and DPPH radical scavenging activity, which are dependent variables, were extraction temperature of 90-95℃ and extraction time of 4 hr, which were not significantly different from the actual values. Therefore, Lycium barbarum extract rich in total phenol and flavonoid content related to antioxidant function is expected to be used as a functional food and cosmetic material.

• 우주기술과 응용
• /
• 제3권4호
• /
• pp.342-354
• /
• 2023

뉴스페이스 패러다임에서 바라본 큐브위성 개발과정의 역설은 복잡하고 험난한 시스템 엔지니어링 절차와 관련이 있다. 상업적 관점에서 큐브위성은 비용 측면은 물론 제작 기간도 짧아 스타트업 주도의 뉴 스페이스 산업구조에서 접근성이 뛰어난 우주자산이다. 하지만 큐브위성 경연대회와 같이 대학 주체의 개발팀들이 마주할 개발과정은 생각과는 너무도 다르다. 이는 큐브위성 또한, 시스템 공학기반의 체계사업이 제시하고 있는 길고도 험난한 과정을 통해 위성을 개발하고 검증받기 때문이다. 따라서 본 논문에서는 체계사업에 익숙하지 않은 개발자들에게 큐브위성의 각 개발 단계에 적용되는 시스템공학의 역할과 기능을 전달하고자 한다.

• 공업화학
• /
• 제31권6호
• /
• pp.660-667
• /
• 2020

본 연구의 대상은 에폭시 레진 생산 공정으로 155 ℃ 이상의 고온 스팀을 열원으로 사용하고 있으며 공정에서 생성되는 응축수는 전량 버려지고 있다. 공정의 일부는 70 ℃ 이하의 저온으로 운전되므로 버려지는 응축수를 재활용하여 저온 공정의 열원으로 사용한다면 스팀 사용량 저감이 가능하다. 따라서 본 연구에서는 응축수 재활용을 통해 폐열을 회수하여 스팀 사용량을 저감할 수 있는 공정을 제시하고 모델을 개발하였다. 최적의 응축수 재활용 공정을 찾기 위한 사례연구를 진행하였고, 각 사례의 연간 자본 비용 및 스팀 저감 비용을 비교하여 경제성 평가를 실시하였다. 제안된 공정에서 응축수 회수를 통해 저온 공정에 사용하는 스팀 사용량을 연간 최대 67.6%까지 저감하여 최대 연 522.1 백만원의 추가 수익의 확보가 가능함을 확인하였다.