• Journal of Microbiology and Biotechnology
• /
• 제12권1호
• /
• pp.142-144
• /
• 2002

Two different extracellular lipases were produced by an anaerobic bacterium, Selenomonas lipolytica. A major lipase, lipase I, was isolated, which showed optimum activity at pH 6.0 and at $45^{\circ}C$. It showed a molecular weight of 240 kDa and was a tetramer of a subunit having molecular weight of 60 kDa, which is different from the known bacterial lipases.

• Korean Chemical Engineering Research
• /
• 제56권3호
• /
• pp.343-348
• /
• 2018

Each of the two polycarbonates (PC) of different molecular weights was blended with acrylonitrile-butadiene-styrene (ABS) under high-shear rate processing to afford PC/ABS. Sizes of ABS dispersed phases and mechanical properties of PC/ABS blends were investigated and high-shear rate processing of PC/ABS was carried out by changing screw speed and processing time. Prepared specimens were examined by scanning electron microscope (SEM) to observe morphology changes. Sizes of ABS dispersed phases in PC/ABS blends were observed to decrease gradually as screw speeds increased. Tensile strengths and elongations of specimens were investigated by universal testing method (UTM) to study the influence of molecular weight of PC exerting on PC/ABS blends. As a result, PC1/ABS blends (PC1: higher molecular weight PC) exhibited more strengthened properties than PC2/ABS (PC2: lower molecular weight PC). The tensile strength of PC1/ABS showed an increasing tendency when the screw speed increased, and the elongation did not show a significant decrease, but increased slightly with increasing shear time at a constant screw speed of 1000 rpm.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.13-20
• /
• 1995

This study was carried out to investigate the characterization of lignins from waste liquors in SP, KP, ASAM, and AS from Pinus densiflora, Quercus mongolica, and Betula ermanii. Spectroscopic study was applied to examine the lignins separated from different pulping process. Lignin contents in waste liqours increased in order of AS, ASAM, KP, and SP. UV spectra of three types of lignin except AS lignin showed similar pattern. IR spectra of AS lignin showed strong C=O absorptions in the range from 1730 to 1750$cm^{-1}$, where as those of KP, SP, and ASAM showed weak stretch in this region. NMR spectra of AS lignin showed strong characteristic chemical shifts of acetoxyl groups of acetylated aliphatic and aromatic hydroxyl groups at 2.0~2.5 ppm. Molecular weight of ASAM lignin from Pinus densiflora determined and found number average molecular weight 1,199, weight average molecular weight 5,458. z average molecular weight 17,242, and viscosity average molecular weight 5,457. It is considered from the results based on spectroscopic study of lignin that waste liquors (in SP, KP, ASAM and AS) from Pinus densiflora, Quercus mongolica, and Betula ermanii can be used for lignin utilization.

• 한국자기공명학회논문지
• /
• 제20권1호
• /
• pp.7-12
• /
• 2016

PTMEG(Polytetramethylene ether glycol) is a polymer compound widely used as a wide range of applications in the textile industry. PTMEG substance carrying various 1,800~2,000 molecular weight are mainly used as the raw material of the spandex production. Molecular weight and degree of polymerization value for 4 different PTMEG samples under pilot plant scale synthetic process were determined by a new quantitative NMR method. In NMR experiments, p-toluenesulfonic acid(TSOH) was used for external standard material of PTMEG quantitative analysis. were measuring The concentration of the primary standard TSOH was measured by UV/Vis spectroscopy. By using NMR peak assignments and the integral values of designated proton NMR peaks, We were able to measure the % composition of the synthetic PTMEG polymers, concentrations, molecular weight and the degree of polymerization that show the synthetic process of each manufacturing pilot plant. By utilizing a newly developed quantitative NMR method were able to obtain the molecular weight of PTMEG samples within 0.08 error % range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 C
• /
• pp.1262-1264
• /
• 1994

Effects of molecular characteristics such as melt index and shapes of molecular weight distribution on the charge formation in LDPE have been investigated. Both homocharge and heterocharge were observed in LDPE depending on the value of melt index. It was found that the LDPE having intermediate melt indices shows heterocharge while the LDPE having small and high melt indecies shows homocharge. The shapes of molecular weight distributions were also found to affect the space charge in LDPE. These were explained by the role of short chains having low molecular weight in LDPE.

• Journal of Pharmaceutical Investigation
• /
• 제35권1호
• /
• pp.17-23
• /
• 2005

Polyethylenimine (PEI) has been used as cationic polymers for efficient gene transfer without the need for endosomolytic agents. Various kinds of PEIs with different molecular weight were tested in order to investigate the effects of the molecular weight of PEI on the transfection efficiency and cell cytotoxicity. The ${\beta}-galactosidase$ expression $(pCMV-{\beta}-gal)$ plasmid was used as a model DNA. Complex formation between PEI and pDNA was assessed by 1% agarose gel electrophoresis method. Particle size and zeta-potential of complexes were determined by electrophoretic light scattering spectrometer. In vitro transfection efficiency was assayed by measuring ${\beta}-galactosidase$ activity. Cell cytotoxicity was determined by MTT assay. Particle sizes of the complexes became smaller on increasing molecular weights of PEI and N/P ratios. Surface potential of complexes was increased as the molecular weight of PEI increased. Transfection efficiency of $pCMV-{\beta}-ga1$ on the HEK 293 cells was greatest with PEI 25 K system but having the lowest cell viability. PEI with high molecular weight showed higher transfection efficiency and cell viability than PEI with low molecular weight.

• 한국산학기술학회논문지
• /
• 제14권3호
• /
• pp.1512-1518
• /
• 2013

말단캡핑제(end capping agent) 6종류에 대해 폴리카보네이트를 용융중합법으로 제조하였다. 합성된 폴리카보네이트의 화학구조는 FT-IR 스펙트럼을 이용하여 확인하였다. 평균분자량 및 분자량분포도, 유리전이 온도 및 열분해 온도는 GPC, DSC와 TGA를 이용하여 측정하였다. 말단캡핑제의 화학구조에 따라 평균분자량이 증가 또는 감소를 나타내었으며, 말단캡핑제로 4-tert-butylphenol (TBP)이 사용되었을 때 최적의 분자량 조절 결과를 나타내었다. 말단캡핑제의 함량이 증가할수록 평균분자량은 감소하였고, 4-tert-butylphenol이 0.05 - 0.1 mol%가 첨가될 때 폴리카보네이트의 대형 사출물 가공에 적합한 20,000 - 30,000 정도의 수평균분자량을 나타내었다. 폴리카보네이트의 용융점도와 유리전이온도는 분자량이 감소할수록 감소하였다. 말단캡핑제의 투입방법 변경은 PC의 분자량분포도에 영향을 주었고, power law index의 감소를 보여주었다.

• 분석과학
• /
• 제15권3호
• /
• pp.229-235
• /
• 2002

폴리스티렌 시료의 표면을 플라즈마 이온주입(PSII) 기술로 처리하여 친수성을 향상시켰다. 친수성이 향상된 표면은 시간이 지남에 따라 원래 성질인 소수성으로 되돌아가려는 특성 (aging effect)이 있는데 본 연구에서는 각각 분자량이 다른 폴리스티렌 필름을 이용하여 분자량에 따른 에이징 효과를 살펴보았다. 무게평균 분자량이 각각 $M_w$ = 760, 2430, 31600, 115700, 280000, 903600 인 폴리스티렌을 가스종류와 펄스전압 등의 PSII 실험 변수에 따라 표면 친수성 변화를 측정하였고 PSII 처리 후 보관온도를 달리하여 분자량에 따른 에이징 정도를 관찰하였다. 분자량이 큰 폴리스티렌이 시간에 따른 에이징 현상이 적게 일어났으며 펄스전압과 보관온도가 높은 조건에서도 사슬이 긴 폴리스티렌이 에이징이 덜 되었다. 물 접촉각을 측정하여 표면 친수성을 나타내었으며 처리 후 표면 구조 변화를 관찰하기 위하여 SEM과 AFM을 이용하였고, TOF-SIMS와 XPS를 통하여 표면에 생성된 작용기들을 확인하였다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.324-324
• /
• 2006

In copolymerization of methyl acrylate (MA) and methyl methacrylate (MMA) with various ratios of MA to MMA and $[CuCl]/[PMDETA]/[PVAc-CCl_{3}]$ catalyst system in bulk at $80^{\circ}C$ via ATRP, several terpolymer with different copolymer composition, were synthesized. The atom transfer radical copolymerization of MA and MMA with macroinitiator, is very sensitive to molecular weight and its distribution. In this work it was possible to calculate the molecular weight of the terpolymers and show that it is close to the experimentally determined number average molecular weight from GPC.

• 한국염색가공학회지
• /
• 제12권3호
• /
• pp.166-173
• /
• 2000

Various kinds of water soluble N,N,N-trimethylchitosan ammonium chloride(TMC) with different molecular weights were synthesized to examine the antimicrobial activity against Methicillin Sensitive Staphylococcus aureus(MSSA) and Methicillin Resistant Staphylococcus aureus(MRSA), which causes serious hospital infection, and to apply them to antimicrobial finishing agents for textiles. Chitosan samples were highly deacetylated with sodium hydroxide solution and degraded with hydrogen peroxide to control the molecular weight. TMC has the antimicrobial activities against MRSA and MSSA. TMC showed an excellent antimicrobial activity below the molecular weight of 70,000, especially at 40,000. The minimum inhibitory concentration (MIC) of TMC with optimum molecular weight against MRSA and MSSA was 250ppm. Because MRSA did not resist TMC in the subculture test of bouillon medium, it was expected that the successive use of TMC against MRSA was possible.