• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.176-183
• /
• 2003

The paper presents a feature recognition and segmentation method for surface approximation in reverse engineering. Efficient digitizing plays an important role in constructing a computational surface model from a physical part-surface without its CAD model on hand. Depending on its measuring source (e.g., touch probe or structured light), each digitizing method has its own strengths and weaknesses in terms of speed and accuracy. The final goal of the research focuses on an integration of two different digitizing methods: measuring by the structured light and that by the touch probe. Gathering bulk of digitized points (j.e., cloud-of-points) by use of a laser scanning system, we construct a coarse surface model directly from the cloud-of-points, followed by the segmentation process where we utilize the z-map filleting & differencing to trace out feature boundary curves. The feature boundary curves and the approximate surface model could be inputs to further digitizing by a scanning touch probe. Finally, more accurate measuring points within the boundary curves can be obtained to construct a finer surface model.

• 한국수자원학회논문집
• /
• 제38권2호
• /
• pp.155-166
• /
• 2005

상류이송기법은 불연속 흐름을 해석할 수 있기 때문에 댐붕괴류, 천이류 등의 해석에 많이 이용되고 있다. 그러나 상류이송기법은 생성항 처리과정에서 발생하는 오차로 인해 불균일한 단면을 가진 자연하천에는 거의 적용되지 못하고 단순화된 하도에만 주로 적용되어 왔다. 본 논문에서는 생성항의 차분화를 위해서 정규화된 Jacobian을 사용하는 상류이송형 생성항 처리기법을 개발하였다. 적용 결과 본 연구에서 제안된 생성항 처리기법이 정확하면서 효율적인 것으로 나타났다. 본 연구에서 제안한 방법은 단순한 형태를 지니고 있으며 다른 상류이송기법에도 다양하게 적용될 수 있을 것으로 판단된다.

• 에너지공학
• /
• 제17권4호
• /
• pp.233-240
• /
• 2008

최근 새로운 2계 자기 수반형(self-adjoint) 중성자 수송 방정식으로 기존의 우성 및 기성 수송 방정식 외에 SAAF(Self-Adjoint Angular Flux) 수송 방정식이 소개되어, 이에 대한 적절한 경계조건, 수치해법, 정확도 등에 관한 논의가 활발히 진행되고 있다. 본 연구에서는 SAAF 수송 방정식의 수학적, 물리적 의미를 고찰하고 기존의 우성 및 기성 수송 방정식과의 연관성을 명확히 하였으며, Boltzmann 수송 방정식의 1계 차분식에서 2계의 SAAF 수송 방정식의 차분식을 유도하는 방법을 확산 가속법(diffusion synthetic acceleration method)과 함께 소개하였다. 유도된 SAAF 차분법이 계산 효율성과 수송해의 정확도를 증가시킴을 수치결과로 확인하였다.

• 한국해양공학회지
• /
• 제20권4호
• /
• pp.31-36
• /
• 2006

Numerical schemes for spacing and time are tested to accurately simulate the wave propagation. The tested numerical schemesinclude 2nd-order central differencing, l-order upwind scheme, 2nd-order Leith scheme, 3rd-order MUSCLE, QUICK and QUICKEST schemes in spacing and the Euler and 4th-order Runge-Kutta(R-K) schemes in time. It is seen that more accurate results are expected when the higher-order schemes, especially the schemes combined with a TVD control limiter, are used for solving the wave equation. The 3rd-order upwind scheme with limiter and the 4th-order R-K scheme in tim￡ are finally applied to the wave-making simulation in a digital wave tank.

• 정보와 통신
• /
• 제32권8호
• /
• pp.62-68
• /
• 2015

본고에서는 차세대 보안통신 기술로 주목 받고 있는 양자암호시스템의 핵심 모듈인 단일광자 검출기의 최신 연구동향과 KIST 연구개발 내용에 대해 기술한다. 현재 상용화 수준으로까지 발전한 유선 양자암호 시스템에서는 성능, 소형화, 가격 등의 장점으로 인해 주로 InGaAs/InP avalanche photo diode (APD)를 이용한 단일광자검출기가 사용되고 있다. 유선 양자암호에서 사용하는 1550nm 통신 파장대의 단일광자가 갖는 에너지는 0.8 eV로 매우 미약한 수준이기 때문에 신호 검출을 위해 APD소자를 내부 증폭 이득이 무한대인 가이거모드(Geiger mode)에서 동작시킨다. 매우 높은 증폭비는 신호 검출뿐만 아니라 노이즈에도 동일하게 영향을 미치기 때문에 주변환경 노이즈에 의한 검출기 오동작 문제가 심각하게 발생한다. 따라서 단일광자검출기 구현에서 가장 중요한 기술은 소자 및 검출기 모듈에서 발생하는 노이즈의 영향을 최소화 시켜주는 것이다. 전세계적으로 검출기의 대표적인 노이즈인 after pulse를 저감 시키기 위한 연구가 매우 활발히 이루어지고 있는데 대표적으로 self-differencing, auxiliary signal, integrating, double balanced 등의 방법이 제시되고 있다. 본고에서는 각각의 최신 기술들에 대한 비교 분석 및 이를 바탕으로 현재 KIST에서 진행하고 있는 양자암호시스템을 위한 단일광자검출기 기술 개발에 대해 서술한다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.155-161
• /
• 1999

The three-dimensional turbulent cascade flows with and without endwall fences are numerically investigated by solving the incompressible Navier-Stokes equations with a high-Reynolds number $k-{\varepsilon}$ turbulence closure model. A projection method based algorithm is used in the finite-volume formulation, with the second order upwind-differencing scheme for the convective terms. First, assessments on accuracy of the present method are made by comparing the static pressure distributions at the mid-span of the cascade with measured data, and also by confirming the experimental observations on the choice of an optimal fence height for the secondary flow control. In understanding the three-dimensional nature of the secondary flow in turbine cascade, the limiting streamline patterns and the static pressure contours at the suction surface of the blade as well as on the cascade endwall are employed to visualize the effectiveness of the endwall fence for the secondary flow control. Analysis on the streamwise vorticity contour maps along the cascade with the three-dimensional representation of their iso-surfaces reveals the strucuture of the complicated vortical flow in the turbine cascade with endwall fence, and also leads to an understanding on formation of the counter-rotating streamwise vortex over the endwall fence, in explaining the mechanisms of controlling the secondary flow and also for the proper selection of an optimal fence height.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.1-14
• /
• 1998

2차원 천수방정식에 기초한 조류계산 수치모델을 개발하였다. 복잡한 해안선의 입력을 단순화할 수 있는 직각격자를 사용하였으며, 방정식은 효율이 뛰어난 것으로 알려져 있는 인수분해음해법(Implicit Factorization Method)에 의하여 수치적으로 풀었다. 대류항은 상류차분법으로 처리하여 수치소산이 자동적으로 들어가도록 하였으며, 따라서 수치불안정에 의한 발산을 억제할 수 있었다. 모델의 검증을 위하여 선형화된 천수방정식을 풀고 계산결과를 해석해와 비교하였으며 잘 일치하고 있음을 확인하였다. 수치모델의 응용 예로서 인천항부근의 경인운하 개발예정인 수로에서의 조류 계산결과를 보였다.

• 산업공학
• /
• 제14권1호
• /
• pp.95-105
• /
• 2001

Previous work measurement methods need much time and effort of time study analysts because they have to measure required time through direct observations. In this study, we propose a method which efficiently measures standard times without involvement of human analysts using digital image processing techniques. This method consists of two main steps: motion representation step and cycle segmentation step. In motion representation step, we first detect the motion of any object distinct from its background by differencing two consecutive images separated by a constant time interval. The images thus obtained then pass through an edge detector filter. Finally, the mean values of coordinates of significant pixels of the edge image are obtained. Through these processes, the motions of the observed worker are represented by two time series data of worker location in horizontal and vertical axes. In the second step, called the cycle segmentation step, we extract the frames which have maximum or minimum coordinates in one cycle and store them in a stack, and calculate each cycle time using these frames. In this step we also consider methods on how to detect work delays due to unexpected events such as operator's escapement from the work area, or interruptions. To condude, the experimental results show that the proposed method is very cost-effective and useful for measuring time standards for various work environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.812-817
• /
• 2005

The objective of the present work is to develop a time-domain numerical method of broadband noise in a cascade of airfoils. This paper focuses on dipole broadband noise sources, resulting from the interaction of turbulent inflows with the flat-plate airfoil cascade. The turbulence response of a two-dimensional cascade is studied by solving both of the linearised and full nonlinear Euler equations employing accurate higher order spatial differencing, time stepping techniques and non-reflecting inflow/outflow boundary condition. The time-domain result using the linearised Euler equations shows good agreement with the analytical solution using the modified LINSUB code. Through the comparison of the nonlinear time-domain result using the full nonlinear Euler equations with the linear, it is found that the acoustic mode amplitude of the nonlinear response is less than that of the linear response due to the energy cascade from low frequency components to the high frequency ones. Considering the merits of the time-domain methods over the typical time-linearised frequency-domain analysis, the current method is expected to be promising tools for analyzing the effects of the airfoil shapes, non-uniform background flow, linear-nonliear regimes on the broadband noise due to gust-cascade interaction.