• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2431-2433
• /
• 1999

Phase errors of arrayed waveguide degrade the performance of AWG router, especially for dense WDM system. So it is necessary to measure the phase error and to compensate. The analysis method of the interference signal from the low coherence interferometer to measure the path length difference phase error is studied. The interference signal generated assuming the intentional path length difference errors of 0.1$\sim$0.4${\mu}m$ are analyzed and the results show that the path length difference phase error of ${\Delta}L$ within ${\pm}14^{\circ}$ of sampling phase error can be accurately measured.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.14-17
• /
• 2003

웨이블릿 변환 영역에서 잡음제거 방법 중 Visushrink 추정에 사용되는 경계값은 측정 데이터 수와 잡음편차에 비례하는 것으로 알려져 있으나 잡음편차가 알려지지 않은 경우 Donoho는 웨이블릿 변환 영역의 최고대역에서 잡음편차 추정 방법을 제시하였다. 본 논문에서는 분산이 데이터 수에 반비례함을 이용하여 threshold 기법을 이용하여 잡음제거 시 계산량을 감소를 목적으로 차 신호를 이용하여 측정데이터 수를 줄인 후 영상신호의 가우시안 잡음을 soft threshold 기법을 적용하고 이 기법의 실용성을 밝혔다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2008년도 추계학술대회
• /
• pp.181-184
• /
• 2008

The paper describes a Layered Modulation using the SVC signals and studies the properties of the modulation with respect to several parameters by the computer simulation. The SVC signals will include a base layer signal and an enhancement signal, and the base layer signal is the more important one in its channel robustness. The parameters will include a carrier frequency, a bandwidth, power level, modulation type and code rate. We analyze the demodulating and decoding process of the Layered Modulation system through several scatter plots. And then we discuss the affect of the layer signal power difference to the BER performance, which also proves the base layer signal is more important than the enhancement layer signal.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권2호
• /
• pp.127-134
• /
• 2022

In this paper, a low-cost, flexible GPS simulator based on USRP is designed as a general-purpose software wireless front-end. The simulator consists of a software GPS signal generator and a USRP-based RF transmitter. The simulator supports various scenarios including specified reception time, quantization bit level, I/Q data types, IF frequency, sampling frequency, SNR, ionospheric delay and user dynamics. The generated GPS RF signal is verified using the spectrum analyzer and off-the-shelf GNSS receivers such as U-blox M8T. The experimental results shows that the difference between generated and real live signal is ignorable. It is expected that designed GPS simulator can be used to GNSS signal design, receiver design and signal processing algorithms such as anti-jamming.

• ETRI Journal
• /
• 제45권2호
• /
• pp.277-290
• /
• 2023

This paper proposes a method that can reduce the complexity of a system matrix by analyzing the characteristics of a pseudoinverse matrix to receive a binomial frequency division multiplexing (BFDM) signal and decode it using the least squares (LS) method. The system matrix of BFDM can be expressed as a band matrix, and as this matrix contains many zeros, its amount of calculation when generating a transmission signal is quite small. The LS solution can be obtained by multiplying the received signal by the pseudoinverse matrix of the system matrix. The singular value decomposition of the system matrix indicates that the pseudoinverse matrix is a band matrix. The signal-to-interference ratio is obtained from their eigenvalues. Meanwhile, entries that do not contribute to signal generation are erased to enhance calculation efficiency. We decode the received signal using the pseudoinverse matrix and the removed pseudoinverse matrix to obtain the bit error rate performance and to analyze the difference.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.1057-1063
• /
• 1994

An instantaneous frequency analysis is a technique to examine a signature for the rotating machinery if the signal has several transitions within a cycle. This paper discusses the conditions of existing negative frequency components in the instantaneous frequency. By using a signal consisted of two frequency components, the instantaneous frequency analysis is conducted while the amplitude ratio between two frequency components has been changed. The analysis shows that, depending on the amplitude ratio, the instantaneous frequencies have averaged, zero-valued, or negative components. It turns out that the negative-valued instantaneous frequencies, which have been regarded as the noise effect, are the consequence of the calculation process for the multisignal components. The criteria of existing the negative values in instantaneous frequencies is given in terms of the relative amplitude ratio and the frequency difference. Especially when the amplitude ratio approaches to 1, the instantaneous frequency fluctuates ${\pm}\infty$ in theory, which implies that instantaneous frequency has unstable region around the amplitude ratio, 1.Also, as the frequency difference between major signal components is increased, the region of existing negative instantaneous becomes broader. In an instantaneous frequency analysis, therefore, a narrow band analysis is suggested, with extreme care if the amplitude ratio approaches to 1. In this paper, a vibration signal monitored from a rotating machinery is also examined as an application example in order to show the existence of negative instantaneous frequencies components.

• 한국음향학회지
• /
• 제23권7호
• /
• pp.514-520
• /
• 2004

수중에서 음원의 위치 추정을 위해 적용되어지는 기법으로써 시간지연차 (TDOA : Time Difference Of Arrival) 추정, 빔 형성 기법, 고 분해능 기법 등이 있다. 본 논문에서는 상대적으로 적은 수의 센서를 사용하여 주파수 영역에서 시간 지연차 추정에 사용되는 MCPSP (Modified Cross Power Spectrum Phase) 함수를 이용하였다. 그러나 MCPSP 함수에 기반한 방법은 CW (Continuous Wate) 신호를 대상으로 할 경우 추정 성능이 크게 떨어진다. 이에 본 논문에서는 Pulsed CW신호를 사용하는 수중 음원의 위치를 추정하기 위해 단 구간 (short-time) 에너지 검출을 이용하여 핑(ping)의 경계 영역을 포함하는 세그먼트를 구성하고 이로부터 MCPSP 함수를 구하는 방법을 제안하였다. 제안된 방법의 성능에 대한 이론적인 접근과 함께 다양한 환경 하에서 분석이 이루어졌다.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• 한국위성정보통신학회논문지
• /
• 제12권1호
• /
• pp.28-33
• /
• 2017

본 논문에서는 여러 곳에서 통용되고 있는 기존의 CW(continuous-wave) 레이더 송수신모델을 수정한 송수신모델을 제안한다. 최근에 심장박동과 호흡을 검출하기 위해 기존신호모델을 기반으로 CW(continuous-wave) 레이더에 대한연구가 진행 되고 있다. 그러나 이 통용되고 있는 수신모델은 인체 공학적으로 개념과 일치하지 않기 때문에 이모델을 근거로 실험을 할 경우 실제 개발되는 시스템 성능을 정확하게 예측할수 없다. 본 논문에서는 인체 공학상 개념과 일치하는 수정된 CW(continuous-wave) 레이더 송수신모델을 제안하고 가운시안 잡음rhk 다중경로 환경에서 심장박동 및 호흡검출에 대한 시뮬레이션을 수행하고 이를 기존수신모델과의 심장박동과 호흡검출에 대한 성능을 비교 분석한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.982-986
• /
• 1997

A method using cutting force signal and neural network for detection tool damage is proposed. Cutting force signal is gained by tool dynamometer and the signal is prepocessed to normalize. Cutting force signal is changed by tool state. When tool damage is occurred, cutting force signal goes up in comparison with that in normal state. However,the signal goes down in case of catastrophic fracture. These features are memorized in neural network through nomalizing couse. A new nomalizing method is introduced in this paper. Fist, cutting forces are sumed up except data smaller than threshold value, which is the cutting force during non-cutting action. After then, the average value is found by dividing by the number of data. With backpropagation training process, the neural network memorizes the feature difference of cutting force signal between with and without tool damage. As a result, the cutting force can be used in monitoring the condition of cutting tool and neural network can be used to classify the cutting force signal with and without tool damage.