• Korean Journal of Remote Sensing
• /
• v.36 no.2_1
• /
• pp.167-178
• /
• 2020

KOMPSAT-3A images have been used in various kinds of applications, since its launch in 2015. However, there were limits to scientific analysis and application extensions of these data, such as vegetation index estimation, because no tool was developed to obtain the surface reflectance required for analysis of the actual land environment. The surface reflectance is a product of performing an absolute atmospheric correction or calibration. The objective of this study is to quantitatively verify the accuracy of top-of-atmosphere reflectance and surface reflectance of KOMPSAT-3A images produced from the OTB open-source extension program, performing the cross-validation with those provided by a site measurement data of RadCalNet, an international Calibration/Validation (Cal/Val) portal. Besides, surface reflectance was obtained from Landsat-8 OLI images in the same site and applied together to the cross-validation process. According to the experiment, it is proven that the top-of-atmosphere reflectance of KOMPSAT-3A images differs by up to ± 0.02 in the range of 0.00 to 1.00 compared to the mean value of the RadCalNet data corresponding to the same spectral band. Surface reflectance in KOMPSAT-3A images also showed a high degree of consistency with RadCalNet data representing the difference of 0.02 to 0.04. These results are expected to be applicable to generate the value-added products of KOMPSAT-3A images as analysisready data (ARD). The tools applied in thisstudy and the research scheme can be extended as the new implementation of each sensor model to new types of multispectral images of compact advanced satellites (CAS) for land, agriculture, and forestry and the verification method, respectively.

• Korean Journal of Remote Sensing
• /
• v.36 no.5_1
• /
• pp.793-806
• /
• 2020

In this study,for YSU (Yonsei University), MYJ(Mellor-Yamada-Janjic), ACM2 (Asymmetric Convective Model), and BouLac (Bougeault-Lacarrere) PBL schemes, numerical experiments were performed for the case period (June 26-30, 2014). The PBLH calculated by using the backscatter signal produced by the mobile vehicle-mounted lidar system (LIVE) and the PBLH calculated by the prediction of each PBL schemes of WRF were compared and analyzed. In general, the experiments using the non-local schemes showed a higher correlation than the local schemes for lidar observation. The standard deviation of the PBLH difference for daylight hours was small in the order of YSU (≈0.39 km), BouLac (≈0.45 km), ACM2 (≈0.47 km), MYJ (≈0.53 km) PBL schemes. In the RMSE comparison for the case period, the YSU PBL scheme was found to have the highest precision. The meteorological lider mounted on the vehicle is expected to provide guidance for the analysis of the planetary boundary layer in a numerical model under various weather conditions.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.106-113
• /
• 1997

Dynamic loading of structures often causes excursions of stresses well into the inelastic range, and the influence of the geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. A structure in a nuclear power plant is a structure of importance which puts emphasis on safety. A nuclear container is a pressure vessel subject to internal pressure and this structure is constructed by a reinforced concrete or a pre-stressed concrete. In this study, the material nonlinearity effect on the dynamic response is formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion is numerically solved by a central difference scheme. The constitutive relation of concrete is modeled according to a Drucker-Prager yield criterion in compression. The reinforcing bars are modeled by a smeared layer at the location of reinforcements, and the steel layer model under Von Mises yield criteria is adopted to represent an elastic-plastic behavior. To investigate the dynamic response of a nuclear reinforced concrete containment structure, the steel-ratios of 0, 3, 5 and 10 percent, are considered. The results obtained from the analysis of an example were summarized as follows 1. As the steel-ratio increases, the amplitude and the period of the vertical displacements in apex of dome decreased. The Dynamic Magnification Factor(DMF) was some larger than that of the structure without steel. However, the regular trend was not found in the values of DMF. 2. The dynamic response of the vertical displacement and the radial displacement in the dome-wall junction were shown that the period of displacement in initial step decreased with the steel-ratio increases. Especially, the effect of the steel on the dynamic response of radial displacement disapeared almost. The values of DMF were 1.94, 2.5, 2.62 and 2.66, and the values increased with the steel-ratio. 3. The characteristics of the dynamic response of radial displacement in the mid-wall were similar to that of dome-wall junction. The values of DMF were 1.91, 2.11, 2.13 and 2.18, and the values increased with the steel-ratio. 4. The amplitude and the period of the hoop-stresses in the dome, the dome-wall junction, and the mid-wall were shown the decreased trend with the steel-ratio. The values of DMF were some larger than those of the structure without steel. However, the regular trend was not found in the values of DMF.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.331-341
• /
• 2020

Recently the government has succeeded in shutting down the Illegal Copyrighted Websites by cracking down on the operators of the websites. But this only caused 'the Balloon Effect', similar websites were created and users shifted to the new websites. 'Follow the money' is drawing attention as a way to complement the effect of policies. It tracks the commercialization scheme and fund flows of the Illegal Copyrighted Websites and blocks the supply and publication of advertisements, which are the main source of revenue. This approach aims at self-closure of Illegal websites by blocking the revenue source. In this study, we have selected and analyzed overseas cases that adopted these measures. Many countries had different policies and campaigns, but three things are common: non-punishment measures, partnership based on voluntary participation, pursuing a variety of purposes other than protecting the copyright industry. In Korea, the reason public-private Partnerships was not properly established had been caused by the difference of views between them. Advertisers and agencies need to expand their awareness that illegal advertisements can have adverse effects such as brand image damage and enormous economic losses. Also campaigns and conferences related with the policy should be held to prevent copyright infringement through mutual understanding and cooperation.

• Journal of Korea Multimedia Society
• /
• v.11 no.5
• /
• pp.610-622
• /
• 2008

Moving object segmentation is an essential technique for various video surveillance applications. The result of moving object segmentation often contains shadow regions caused by the color difference of shadow pixels. Hence, moving object segmentation is usually followed by a shadow elimination process to remove the false detection results. The common assumption adopted in previous works is that, under the illumination variation, the value of chromaticity components are preserved while the value of intensity component is changed. Hence, color transforms which separates luminance component and chromaticity component are usually utilized to remove shadow pixels. In this paper, various color spaces (YCbCr, HSI, normalized rgb, Yxy, Lab, c1c2c3) are examined to find the most appropriate color space for shadow elimination. So far, there have been some research efforts to compare the influence of various color spaces for shadow elimination. However, previous efforts are somewhat insufficient to compare the color distortions under illumination change in diverse color spaces, since they used a specific shadow elimination scheme or different thresholds for different color spaces. In this paper, to relieve the limitations of previous works, (1) the amount of gradients in shadow boundaries drawn to uniform colored regions are examined only for chromaticity components to compare the color distortion under illumination change and (2) the accuracy of background subtraction are analyzed via RoC curves to compare different color spaces without the problem of threshold level selection. Through experiments on real video sequences, YCbCr and normalized rgb color spaces showed good results for shadow elimination among various color spaces used for the experiments.

• Management & Information Systems Review
• /
• v.32 no.2
• /
• pp.289-314
• /
• 2013

This study analyzed differences in the effects of communication with salesperson's on customer's emotional responses and store loyalty at customer contact focusing on the moderating effects of salesperson's attribute. This study recognized the need for expanding the results of the prior researches to widen the understanding of communication, emotional responses, and store loyalty. This study tried to, first, examine the effects of communication between customers and salespersons on emotional responses and store loyalty at customer contact; second, determine the effects of reliability and attractiveness, which are attributes of salespersons, as moderating variables; third, examine relative influences of verbal and nonverbal communication on emotional responses and store loyalty. The results mainly showed, first, that communication significantly affected emotional responses and also had significant effects on arousal as well as positive and negative emotion, contrary to prior researches; second, that emotional responses significantly affected store loyalty; third, there was no difference in influences on emotional responses between verbal and nonverbal communication; fourth, the effects of communication on emotional responses depended on attributes of salespersons, demonstrating interactive effects between communication and attributes of salespersons. This study intended to provide theoretical expansion over relations between variables including the dimension of communication beyond empirical reconfirmation of prior researches. In addition, a strategic scheme was presented to manage positive relations with customers at customer contact.

• Journal of the Korean earth science society
• /
• v.36 no.6
• /
• pp.553-566
• /
• 2015

The effects of vertical resolutions and planetary boundary layer (PBL) physics schemes in a numerical simulation with a very high resolution over the metropolitan area were investigated. The numerical experiments using the Weather Research and Forecast model were conducted from 0000 UTC 25 October to 0000 UTC 26 October 2013. We verified the numerical results against with six hourly observation data from the radiosonde at Seolleung, which was located in southern part of Seoul, and forty three auto weather systems in Seoul. In the experiments of vertical resolutions in low level atmosphere with 44, 50, and 60 layers, which are set to be subdivided particularly under 2 km height. The experiment in 60 layers, which has the highest vertical resolution in this study, showed relatively a clear diurnal variation of PBL heights. Especially, the difference of PBL heights and 10-meter wind fields were mainly seen in the area of high altitude lands for the experiments of vertical resolution. In the sensitivity experiment of PBL schemes such as asymmetric convective model-version 2 (ACM2), Yonsei University (YSU), and Mellow-Yamada-Janjic (MYJ) to the temperature, all three PBL schemes revealed lower temperature than observed profile from the radiosonde in the entire period. The experiments with YSU PBL and ACM2 PBL schemes show relatively less biased in comparison with the experiment of the MYJ PBL scheme.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.39 no.3
• /
• pp.53-61
• /
• 2002

In this paper, the authors proposed the digital audio watermarking algorithm for a high quality audio. Today, the digital watermark is used to confirm to the digital copyright protection, not only the digital image but the digital audio study is an activeness in the digital watermarking area. Especially, the watermark insertion in the digital audio area affects deeply not only a robustness but the audio quality of the watermarked audio data. Generally, the audio watermark is inserted in the frequence domain after FFT, the quality of audio data is affected by the watermark insertion. Thus, a high quality audio to be maintained at the same time, the study related a inserting of the robustness watermark happened to a hot issue. In this paper, the authors proposed the digital audio watermarking algorithm using psychoacoustic model and MDCT/IMDCT (Modified Discrete Cosine Transform/Inverse Modified Discrete Cosine Transform). In the proposed scheme, the authors experimented the stereo audio file with 44.1KHz, and 128kbps for the audio watermarking algorithm proposed. When the audio data is processed by MDCT, the watermark is able to insert into the frequence domain with 256, 1024 and 2048 interval. In case of 50㎳ RMS window, it was confirmed that the difference between the original audio data and the watermarked audio data of RMS power is 0.8㏈.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.1
• /
• pp.90-100
• /
• 2011

We present a parallel bi-conjugate gradient (Bi-CG) matrix solver for large scale Bio-FET simulations based on recent graphics processing units (GPUs) which can realize a large-scale parallel processing with very low cost. The proposed method is focused on solving the Poisson equation in a parallel way, which requires massive computational resources in not only semiconductor simulation, but also other various fields including computational fluid dynamics and heat transfer simulations. As a result, our solver is around 30 times faster than those with traditional methods based on single core CPU systems in solving the Possion equation in a 3D FDM (Finite Difference Method) scheme. The proposed method is implemented and tested based on NVIDIA's CUDA (Compute Unified Device Architecture) environment which enables general purpose parallel processing in GPUs. Unlike other similar GPU-based approaches which apply usually 32-bit single-precision floating point arithmetics, we use 64-bit double-precision operations for better convergence. Applications on the CUDA platform are rather easy to implement but very hard to get optimized performances. In this regard, we also discuss the optimization strategy of the proposed method.

• Journal of IKEEE
• /
• v.22 no.3
• /
• pp.822-828
• /
• 2018

Recently, energy issues such as massive blackout due to increase in power consumption have been emerged, and it is necessary to improve the accuracy of prediction of power consumption as a solution for these problems. In this study, we investigate the difference between the actual power consumption and the predicted power consumption through the deep learning- based power consumption forecasting experiment, and the possibility of adjusting the power reserve ratio. In this paper, the prediction of the power consumption based on the deep learning can be used as a basis to reduce the power reserve ratio so as not to excessively produce extra power. The deep learning method used in this paper uses a learning model of long-short-term-memory (LSTM) structure that processes time series data. In the computer simulation, the generated power consumption data was learned, and the power consumption was predicted based on the learned model. We calculate the error between the actual and predicted power consumption amount, resulting in an error rate of 21.37%. Considering the recent power reserve ratio of 45.9%, it is possible to reduce the reserve ratio by 20% when applying the power consumption prediction algorithm proposed in this study.