• 제목/요약/키워드: difference scheme

검색결과 1,343건 처리시간 0.024초

무선 센서네트워크에서 다중 경로 선정에 기반한 에너지 인식 소스 라우팅 프로토콜 (An Energy Aware Source Routing with Disjoint Multipath Selection for Wireless Sensor Networks)

  • 황도연;임재성
    • 한국통신학회논문지
    • /
    • 제31권1A호
    • /
    • pp.23-29
    • /
    • 2006
  • 무선 센서네트워크(Sensor Network)에서는 많은 수의 센서 노드를 영구적으로 사용하기 보다는 일회성의 목적으로 사용하기 때문에 센서 네트워크를 구성하는 노드들의 수명을 장시간 유지시키는 것이 매우 중요하다. 이를 위해서 본 논문에서는 무선 센서네트워크의 연결 유지 시간(network lifetime)을 연장시키기 위한 EASR(Energy Aware Source Routing) 프로토콜을 제안한다. 제안하는 EASR 기법은 기존의 EAR(Energy Aware Routing)처럼 다중 경로 중에 확률에 의해 결정되는 단일 경로로만 데이터 트래픽을 전송하여 에너지 소비를 분산시키는 방법을 사용한다. 하지만 제안하는 EASR 기법에서는 기존의 SMR(Split Multipath Routing)에서 사용되는 다중 경로 선정 기법을 개선한 방법으로서 센서 노드들의 에너지 소비를 최소화 하기 위하여 다중 경로간의 overhearing 지수를 정의하고 이를 근거로 overhearing 현상에 의한 에너지 소비를 최소로 하는 다중 경로를 설정하는 기법이다. 제안하는 EASR기법이 무선 센서네트워크 환경에서 노드의 수명을 장시간 유지시키고 합리적인 데이터 전송 지연시간을 갖는다는 것을 시뮬레이션 분석을 통해 확인하였다.

Duplex-FSK 원격제어 무선 전송부 설계 및 제작 (Design and implementation of remote controlling wireless transmission unit using duplex-FSK)

  • 김영완
    • 한국정보통신학회논문지
    • /
    • 제13권4호
    • /
    • pp.629-635
    • /
    • 2009
  • 본 논문에서는 하나의 국부 발진기를 갖는 FSK 이중통신 방식의 원격제어 무선 전송부를 설계 제작한다. 전 이중 방식의 FSK 양방향 동시통신 회로에서는 양방향 동시 통신을 위한 송수신 주파수를 설정하고, 반 이중방식에서는 송수신 신호를 발생하는 절체형 발진기 회로를 설계한다. 양 FSK 이중통신 방식의 원격제어 무선 전송부는 채널주파수간 간섭을 배제하기 위한 채널 사용 검지 및 자동 채널 설정 회로를 설계 구현하였으며, 400MHz 대역에서 50kHz 채널 간격을 갖는 위상동기 회로 구성의 Colpitz 형 국부발진주파수 회로와 10mW 이내의 소형 소출력 특성을 갖는다. 전 이중 방식의 송수신 주파수는 21.4MHz IF주파수의 2배 주파수인 42.8MHz주파수 간격으로 설계 구현하였다.

실환경 CR 시스템에서 오경보 감소를 위한 신호 검출 알고리즘 (The Signal Detection Algorithms for Reducing False Alarms of CR System in Real Environment)

  • 임선민;정회윤;김상원;정병장
    • 한국통신학회논문지
    • /
    • 제36권8C호
    • /
    • pp.529-535
    • /
    • 2011
  • FCC의 TV white space 개방과 관련하여 스펙트럼 센싱에 대한 관심이 높아지면서 다양한 센싱 기법들이 제안되고는 있으나 대부분 실환경을 고려하지 않아 실제 모듈 적용시 원하는 성능을 얻기가 어렵다. 본 논문에서는 센싱 모듈의 실환경 적용시 발생할 수 있는 문제점과 이를 제어할 수 있는 방법을 제안하고 전산 모의 실험을 통해 성능을 검증하였다. 우선 시스템 내부 스퓨리어스 성분으로 인한 오경보 가능성을 줄이기 위해 시스템 인식을 통한 채널 상태 정보를 이용하여 수산 신호와 구별할 수 있는 방법을 제안하였고, 다음으로 수신 신호에 여러 개의 협대역 신호가 공존하는 경우에 각 신호의 크기 차이로 발생할 수 있는 미검출 가능성을 줄일 수 있도록 서브밴드 정규화 방식을 제안하였다. 전산 모의 실험 결과 시스템 인식 과정을 통해 스퓨리어스 성분으로 인한 오경보는 발생하지 않았으며, 서브밴드 정규화를 통해 기존 채널 단위의 정규화 방식으로 인해 신호간의 크기차로 발생했던 검출 성능의 차이가 신호간의 크기 차이에 상관없이 신호 자체 크기에 따라 검출 성능이 나타나는 것을 확인할 수 있었다.

폐석분 함유율에 따른 최적의 콘크리트 탄성계수 추정 (Presumption of Optimum Concrete Elastic Modulus according to Content of Crushed Stone Powder)

  • 박도경;양극영
    • 한국건축시공학회지
    • /
    • 제6권1호
    • /
    • pp.101-107
    • /
    • 2006
  • While a Study with regard to the measurement on Concrete Strength and the Change of Drying Shrinkage in accordace with Content Ratio of Crushed Stone Powder, it is being analyzed as the result that the strength according to Content Ratio of crushed Stone Powder is somewhat lowering. Accordingly, it is the real situation that the Concrete mixed with Crushed Stone Powder is utilized for non-structural material, not for the structural material. Therefore, this Research willing to furnish the suitable utilizing scheme for construction site as well as practical life by means of conduct the experiment on both Concrete Pressure Strength according to mixture with Crushed Stone Powder and Elastic Modulus, it also presumes the optimum Elastic Modulus Equation after analysis of comparison with common concrete strength. As the result of the experiment, in case of the Content Ratio of Crushed Stone Powder is less than 5%, it did not display a big difference in its both strength and matter-property compare with common concrete. In case of Elastic Modulus, when the Pressure Strength is 50% and 40% respectively, the Elastic Modulus Equation accords very well with the provided condition of Quadratic function, and as the result of the Presumption on Elastic Modulus according to Content of Crushed Stone Powder, in case the Pressure Strength is 50%, Elastic Modulus Equation showed that Error Ratio of Cubic function is at degree of 0.0005%, in case the Pressure Strength is 40%, Elastic Modulus Equation was accorded well with the value of the experimental data likely as the Error Ratio of Cubic function is at the degree around 0.0034%, respectively.

아파트 외부 공간 특성에 따른 어린이놀이터 이용실태에 관한 연구 (A Study on the Actual Condition of Playground According to the Characteristics of Outdoor Space in Apartment Housing)

  • 신은주
    • 한국디지털건축인테리어학회논문집
    • /
    • 제9권2호
    • /
    • pp.5-16
    • /
    • 2009
  • The importance of playground, which is a central place in the outdoor space scheme for apartment and in children's outdoor activity, is increasing. The stature and availability in playground may be varied according to connection between playground and outdoor space and to characteristics of outdoor space. The purpose of this study is to arrange basic data in guidelines of a planning for supporting children's development and for activating its use in the apartment housing. This study conducted the field survey and questionnaire research after selecting 4-case apartment complexes based on the relevant preceding research. The survey results are as follows. Children were recognizing and preferring the playground as the central space in outdoor play activity. Mothers were preferring outdoor space adjacent to playground. There were the most responses with saying that a mother takes to play with a child. Children responded that the use of playground and the rides are the outdoor activity that they do the most. And, it was surveyed that there is difference in dweller's using playground by apartment complex according to characteristics of a planning for outdoor space. Given being connected with square with segregation of pedestrian and vehicle and with the resting space, the availability in playground was the highest. The availability in playground, which has high connection with diversely outdoor space elements while having good accessibility to the apartment building, was surveyed to be high. Playground had high preference in case of being connected with waterfront and resting space, rather than green zone. Diverse environmental artifacts and decorative fence may become a visually stimulus source that can activate the use of playground.

  • PDF

An in vitro comparison between two different designs of sagittal split ramus osteotomy

  • Andrade, Valdir Cabral;Luthi, Leonardo Flores;Sato, Fabio Loureiro;Pozzer, Leandro;Olate, Sergio;Albergaria-Barbosa, Jose Ricardo
    • Journal of the Korean Association of Oral and Maxillofacial Surgeons
    • /
    • 제41권3호
    • /
    • pp.133-138
    • /
    • 2015
  • Objectives: To evaluate the influence of the type of osteotomy in the inferior aspect of the mandible on the mechanical performance. Materials and Methods: The study was performed on 20 polyurethane hemimandibles. A sagittal split ramus osteotomy (SSRO) was designed in 10 hemimandibles (group 1) with a vertical osteotomy in the buccal side (second molar level) and final osteotomy was performed horizontally on the lingual aspect, while the mandible body osteotomy was finalized as a straight osteotomy in the basilar area, perpendicular to the body. For group 2, the same osteotomy technique was used, but an oblique osteotomy was done in the basilar aspect of the mandibular body, forming continuity with the sagittal cut in the basilar area. Using a surgical guide, osteosynthesis was performed with bicortical screws using an inverted L scheme. In both groups vertical compression tests were performed with a linear load of 1 mm/min on the central fossa of the first molar and tests were done with models made from photoelastic resin. Data were analyzed using Student's t-test, establishing a statistical significance when P<0.05. Results: A statistical difference was not observed in the maximum displacements obtained in the two osteotomies (P<0.05). In the extensiometric analysis, statistically significant differences were identified only in the middle screw of the fixation. The photoelastic resin models showed force dissipation towards the inferior aspect of the mandible in both SSRO models. Conclusion: We found that osteotomy of the inferior aspect did not influence the mechanical performance for osteosynthesis with an inverted L system.

Jamming 환경에서 SFH 변조 방식에 따른 위성 통신 시스템의 BER 성능 분석 (An Analysis on BER Performance of Satellite Communication System Classified by SFH-Modulation Method under Jamming)

  • 박우철;고광춘;김재현;김기근
    • 한국전자파학회논문지
    • /
    • 제21권10호
    • /
    • pp.1161-1168
    • /
    • 2010
  • FHSS(Frequency Hopping Spread Spectrum) 방식은 군 통신 시스템에서 재밍(Jamming)에 의한 간섭을 줄이기 위해 사용된다. 하지만 사용되는 변조 방식의 종류, 재밍 신호의 특성에 따른 위성 통신 시스템의 BER 성능이 무선 채널 상태에 따라 어떤 성능 차이를 보이는지 분석되지 않았다. 따라서 본 논문에서는 PBNJ(Partial-Band Noise Jamming)와 WPBJ(Worst case Partial-Band noise Jamming)의 두 가지 재밍 환경에서 NC-MFSK(Non-Coherent M-ary Frequeency-Shift Keying), SDPSK(Symmetric Differential Phase-Shift Keying), GMSK (Gaussian filtered Minimum-Shift Keying)의 세 가지 변조 방식에 따른 위성 통신 시스템의 BER 성능 변화를 분석한다. 또한, 분석된 결과를 이용하여 전송 환경에 따른 최적의 전송 방식을 제안하도록 한다.

한강하류부(漢江下流部)의 홍수추적(洪水追跡) 수치모형개발(數値模型開發) (A Numerical Flood Routing Model at the Downstream of the Han River)

  • 이원환;박상덕
    • 대한토목학회논문집
    • /
    • 제9권1호
    • /
    • pp.63-70
    • /
    • 1989
  • 한강하류부(漢江下流部) 팔당댐으로부터 인도교 지점에 이른 구간의 홍수추적(洪水追跡) 수치모형(數値模型)이 Preissmann의 선형(線型) 4점(點) Implicit 유한차분법(有限差分法)을 적용하여 수립되었다. 본(本) 모형(模型)을 선정된 4개의 홍수사상(洪水事象)에 적용한 결과 모형(模型)의 상류단(上流端) 경계조건(境界條件)으로서 팔당댐의 방류량(放流量) 수문곡선(水文曲線)을 사용하는 것이 고안의 유량수문곡선(流量水文曲線)을 사용하는 것 보다 우수한 것으로 나났으며, 이는 고안 수위표(水位標) 지점(地點)의 수위(水位)-유량관계곡선(流量關係曲線)의 신뢰성(信賴性)이 떨어지기 때문이다. 본(本) 모형(模型)을 통하여 고안 수위표 지점의 수위(水位)-유량(流量) 관계곡선(關係曲線)을 새로이 제시(提示)하였다. 본(本) 모형(模型)의 적용에 있어서 조도계수변동(粗度係數變動)이 홍수추적(洪水追跡) 결과에 미치는 영향은 미소(微小)하였다.

  • PDF

유역(流域) 및 하도(河道) 홍수추적(洪水追跡) 방법(方法)을 결합(結合)시킨 도시하천(都市河川)의 유출해석모형(流出解析模型) (Urban Runoff Model Based on the Watershed and Channel Flood Routing Methods)

  • 원석연;윤용남
    • 대한토목학회논문집
    • /
    • 제13권5호
    • /
    • pp.147-155
    • /
    • 1993
  • 본 연구에서는 유역(流域) 홍수추적모형(洪水追跡模型) 하도(河道) 홍수추적모형(洪水追跡模型)을 결합한 도시(都市) 유출해석모형(流出解析模型)을 수립(樹立)하였다. 즉, 도시(都市) 배수유역(排水流域)으로부터의 홍수유출량(洪水流出量) 산정을 위해서는 ILLUDAS모형(模型)을, 도시하천(都市河川)을 통한 하도(河道) 홍수추적(洪水追跡)을 위해서는 4점(點) 가중(加重) 음형(陰形) 유한차분기법(有限差分技法)을 사용하여 완전한 Saint Venant방정식(方程式)의 해(解)를 구하는 dynamic wave모형(模型)을 채택하였다. 성북천(城北川)의 성북(城北) 제(第) 3고(稿) 유역(流域)을 표본유역(標本流域)으로 선정(選定)하여 표본유역(標本流域)의 강우(降雨)-유출(流出) 자료(資料)를 직접(直接) 측정(測定) 혹은 수집(蒐集)하여 모형(模型)의 적용(適用) 및 검정(檢定)에 사용하였다. 본 연구에서 개발한 도시(都市) 유출해석모형(流出解析模型)을 표본유역(標本流域)에 적용하여 실측(實測) 유출량(流出量)과 비교한 결과 매우 좋은 결과를 보여 주었으므로, 본(本) 모형(模型)은 도시(都市) 소유역(小流域)으로부터의 홍수유출량(洪水流出量)의 계산은 물론 하천(河川)을 포함하고 있는 도시유역(都市流域)의 홍수관리(洪水管理)를 위해서도 유용하게 사용될 수 있는 모형이라 할 수 있다.

  • PDF

스마트 원자로냉각재펌프의 축소모형에 대한 수력성능 예측 (Prediction of Hydraulic Performance of a Scaled-Down Model of SMART Reactor Coolant Pump)

  • 권순국;박진석;유제용;이원재
    • 대한기계학회논문집A
    • /
    • 제34권8호
    • /
    • pp.1059-1065
    • /
    • 2010
  • 본 연구에서는 SMART 원자로의 사류형 원자로냉각재펌프의 축소모형에 대한 수력성능을 예측하기 위하여 설계점을 포함한 다양한 탈설계점에서의 해석을 수행하였다. 계산시간의 효율성을 위하여 임펠러와 디퓨저 각 1개 유로로 이루어진 계산영역을 해석대상으로 선정하였다. 임펠러와 디퓨저간의 정보교환을 위하여 스테이지 기법을 사용하였다. 정상상태 비압축성 유동조건에서 축소모형의 수력성능특성을 파악하기 위하여 해석영역의 입구와 출구에서 압력차를 측정하여 양정, 효율과 축동력을 산출하였다. 수력성능 곡선은 일반적인 사류펌프의 성능특성을 잘 모사하는 것으로 나타났다. 저유량에서의 펌프 내부유동의 복잡한 흐름을 확인 하였다.