• Ocean and Polar Research
• /
• v.45 no.2
• /
• pp.89-102
• /
• 2023

Climate and environmental changes in the Arctic Ocean due to global warming have been linked to extreme climate change in mid-latitude regions, including the Korean Peninsula, requiring a better understanding of the Arctic climate system based on the paleo-analog. This review introduces three paleoenvironmental research cases using neodymium isotopes (¹⁴³Nd/¹⁴⁴Nd, ε_Nd) measured on two different fractions of marine sediments: silicate-bound 'detrital' and Fe-Mn oxide-dominated 'authigenic' fractions. In the first case, detrital ε_Nd in core HH17-1085-GC on the continental shelf off northern Svalbard was used for tracing changes in sediment provenance and associated glacier behavior over the last 16.3 ka. The second case showed the potential use of authigenic ε_Nd as a quasi-conservative water mass tracer. Three prominent ε_Nd peaks and troughs observed in core PS72/410-1 from the Mendeleev Ridge in the western Arctic Ocean over the past 76 ka suggested episodic meltwater discharge events during 51~46, 39~35 and 21~13 ka BP. The last case proposed the use of the difference between authigenic and detrital ε_Nd as a proxy for reconstructing glacier fluctuation. The idea is based on the assumption that enhanced glacial erosion during glacier advances can supply sufficient freshly-exposed rock substrate for incongruent weathering, potentially leading to greater isotopic decoupling between bedrock and dissolved weathering products as recorded in detrital and authigenic ε_Nd, respectively. Thus, it would be worthwhile to take advantage of sedimentary ε_Nd to improve our understanding of past environmental changes in polar regions.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.26 no.5
• /
• pp.181-190
• /
• 2022

In assessing the seismic safety of nuclear power plants, it is essential to analyze the structures using the observed ground motion. In particular, spatial variation in which the characteristics of the ground motion record differ may occur if the location is different within the site and even if the same earthquake is experienced. This study analyzed the spatial variation characteristics of the ground motion observed at the structure and site using the earthquake records measured at the Hamaoka nuclear power plant. Even if they were located on the same floor within the same unit, there was a difference in response depending on the location. In addition, amplification was observed in Unit 5 compared to other units, which was due to the rock layer having a slower shear wave velocity than the surrounding bedrock. Significant differences were also found in the records of the structure's foundation and the free-field surface. Based on these results, the necessity of considering spatial variation in the observed records was suggested.

• Journal of The Geomorphological Association of Korea
• /
• v.17 no.4
• /
• pp.1-16
• /
• 2010

Channel topography, sediment properties, channel landscapes and characteristics of land covers in Naeseongcheon and Wicheon River consisting of granites and sedimentary rocks, respectively, are compared and analyzed. Due to the differences of bedrocks, soils and characteristics of land covers in the basins, Wicheon River with the slow flow speed shows the larger variations in river stage than Naeseongcheon River. While Naeseongcheon River fed by the granite sediments throughout granular disintegration hs tthe regular grain size properties with coarse sand in the most of river, Wicheon River fed by sedimentary rocks indicates the dramatic decertses of grain size lower-ward. Naeseongcheon River with channel interferences such as sand-sized sediment transughoations, dredges, and aggregate collections is analyzed as poorer vegetation covers than Wicheon River due to the dramatic changes in channel surfaces.

• Journal of the Korean Geographical Society
• /
• v.48 no.5
• /
• pp.615-628
• /
• 2013

The waterfall can be formed by difference between the height of up and down part in new channel, is formed by channel avulsion that rapidly changing of river channel course. This study described types and processes of waterfalls by channel avulsion, and analyzed rates and factors of waterfall recession, on object to 7 waterfalls in South Korea. Bulyeong falls at Uljin-gun, Yongchu falls at Yeongdeok-gun, Jikyeon falls at Yanggu-gun and Gwangpum falls at Uljin-gun are formed by natural incised meander cutoff. Samhyeongje falls at Taebaek-si and Guryong falls are formed by river capture processes, and Palbong falls at Chungju-si is formed by artificial channel cutting for farm land secured. The locations of waterfalls gradually moved to upstream over time by head erosion. The recession rates were measured by 3~4m/ka on Bulyeong falls, Yongchu falls, Jikyeon falls and Samhyeongje falls, to estimate of formation age. Recession rates of these 4 waterfalls were analyzed that have clearly positive correlations with drainage area, precipitation, corrosion and weathering capability of bedrock, and initial height of waterfall.

• Journal of the Korean Geotechnical Society
• /
• v.21 no.1
• /
• pp.93-103
• /
• 2005

Both static pile load test with load transfer measuring system and the pile dynamic load test are performed to estimate the skin friction and behavior characteristics of a large drilled shaft. And the numerical modeling of large drilled shaft is performed by applying the FDM program. Since the magnitude of friction resistance depends on the relative displacement between soil and shaft, load and displacement at the arbitrary depth along the large drilled shaft are estimated to analyze the correlation. According to the measuring results of load transfer, unit skin friction along the large drilled shaft was fully mobilized at gravel layer in the middle of shaft and the frictional resistance transmitted to bedrock was relatively small. Also, even for the same drilled shaft, the results of PDA and static load test are different with each other and the difference is discussed.

• The Journal of Engineering Geology
• /
• v.9 no.1
• /
• pp.59-68
• /
• 1999

To clarify the geological structure of Yangsan fault around Sangchon-ri in the southern part of Kyungsang Basin the resistivity (dipole-dipole profiling) and VLF surveys carried out on the four profiles, crossing the inferred trace of the fault. The resistivity contrast across the fault is clearly shown on the profiles: higher resistivity and lower resistivity on the east and west, respectively. It is most likely from the uplift of the granitic bedrock on the east park due to the strike-fault raulting with vertical movement. The zero-crossing points of VLF anomalies, associated with near-surface fracture zone, are found to well correlate with the resistivity boundaries from the dipole-dipole profiling. Consequently, southern segment of Yangsan fault (at Sangchon-ri area) is interpreted to be vertically developed strike-slip fault with a difference more than 10m depth of basement rock at both sides.

• Economic and Environmental Geology
• /
• v.38 no.2 s.171
• /
• pp.129-134
• /
• 2005

The $^{87}Sr/^{86}Sr$ ratios between water and biogenic material are similar in marine and lacustrine environment. Pb isotope ratios we, however, reported not to have been corresponding between the biological tissues and ambient water in aquatic system, contrary to the Sr isotope ratios. In order to explore the potential application of two isotopes as environmental tracers, we report here the isotopic compositions of strontium and lead of gastropod shell in fresh water in Jinan area. The $^{87}Sr/^{86}Sr$ ratios of carbonate shells of gastropod living in fresh stream water, are similar as that of ambient water but are different by sites. The different $^{87}Sr/^{86}Sr$ ratios of stream water between the sites is likely caused by the difference of the isotopic composition of Sr derived form rocks in the basin. In contrast, there is a distinct difference of the lead isotopic values between the water and the gastropod shell, suggesting that shell-fish available lead in aquatic system is different from dissolved lead in water. It is assumed that the majority of Pb in stream water is derived from atmospheric Pb accumulated on soil materials over years rather than from rock.

• Geophysics and Geophysical Exploration
• /
• v.15 no.2
• /
• pp.92-101
• /
• 2012

Three-dimensional finite-difference simulation in a small-scale half-sphere basin with planar free-surface is performed for an arbitrary shear-dislocation point source. A new scheme to deal with free-surface boundary condition is presented. Then basin parameters are examined to understand main characteristics on ground-motion response in the basin. To analyze the frequency content of ground motion in the basin, spectral amplitudes are compared with each other for four sites inside and outside the basin. Also particle motions for those sites are examined to find which kind of wave plays a dominant role in ground-motion response. The results show that seismic energy is concentrated on a marginal area of the basin far from the source. This focusing effect is mainly due to constructive interference of the direct Swave with basin-edge induced surface waves. Also, ground-motion amplification over the deepest part of the basin is relatively lower than that above shallow basin edge. In the small-scale basin with relatively simple bedrock interface, therefore, the ground-motion amplification may be more related to the source azimuth or direction of the incident waves into the basin rather than depth of it.

• Korean Journal of Mineralogy and Petrology
• /
• v.36 no.1
• /
• pp.55-72
• /
• 2023

This study aims to identify the fault zone architecture and geometric and kinematic characteristics of the Yeongdeok Fault, based on the geometry and kinematic data of various structural elements obtained by detailed field survey and anisotropy of magnetic susceptibility (AMS) of the fault rocks. The Yeongdeok Fault extends from Opo-ri, Ganggu-myeon, Yeongdeok-gun to Gilgok-ri, Maehwa-myeon and Bangyul-ri, Giseong-myeon, Uljin-gun, and cuts various rock types from the Paleo-proterozoic to the Mesozoic with a range of 4.6-5.0 km (4.77 km in average) of right-lateral offset or forms the rock boundaries. The fault is divided into four segments based on its geometric features and shows N-S to NNW strikes and dips of an angle of ≥ 54° to the east at most outcrops, even though the outcrops showing the westward dipping (a range of 54°-82°) of fault surface increase as it goes north. The Yeongdeok Fault shows the difference in the fault zone architecture and in the fault core width ranging from 0.3 to 15 m depending on the bedrock type, which is interpreted as due to differences in the physical properties of bedrock such as ductility, mineral composition, particle size, and anisotropy. Combining the results of paleostress reconstruction and AMS in this and previous studies, the Yeongdeok Fault experienced (1) sinistral strike-slip under NW-SE maximum horizontal principle stress (σ_Hmax) and NE-SW minimum horizontal principle stress (σ_Hmin) in the late Cretaceous to early Cenozoic, and then (2) dextral strike-slip under NE-SW maximum horizontal principle stress (σ_Hmax) and NW-SE minimum horizontal principle stress (σ_Hmin) in the Paleogene. It is interpreted that the deformation caused by the Paleogene dextral strike-slip movement was the most dominant, and the crustal deformation was insignificant thereafter.

• The Journal of Engineering Geology
• /
• v.20 no.2
• /
• pp.203-212
• /
• 2010

The aim in this study is used to develop the remediation technologies for contaminated ground water. Slug, single well pumping and step-drawdown tests have been used to obtain hydraulic parameter estimates in the field. Slug tests yield hydraulic conductivity values using the Bouwer and Rice and C-B-P analysis methods. The mean and median hydraulic conductivity values of Bouwer and Rice method are $4.48{\times}10^{-3}$ and $1.16{\times}10^{-3}cm/sec$, respectively. On the other hand, C-B-P method gave mean and median hydraulic conductivity values of $2.37{\times}10^{-3}$ and $7.09{\times}10^{-4}cm/sec$, respectively. These analyses show a trend for the Bouwer and Rice method to yield lower hydraulic conductivity values in low permeability zones of granite in the study area. Sing well pumping test data were calculated through type curve in GW7, GW12 and MW9 wells. It could be interpreted that the differences of hydraulic conductivity and transmissivity values between GW7 and GW12, MW9 is related with fault clays and fractures in the bedrock among the wells. Step-drawdown tests were carried out in the KDPW1 and KDPW2 wells. The hydraulic parameter of KDPW1 and KDPW2 showed very litter difference between the values. The study of hydraulic parameter estimates can be used to purify in contaminated groundwater.