• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 춘계학술대회 논문집
• /
• pp.289-292
• /
• 1997

BaTiO$_3$thin film capacitor were prepared on Pt(100)/SiO$_2$/Si(100)wafer by RF sputtering technique. Dielectric and electrical characteristics of the thin film capacitor are investigated. The Dielectric constant and loss were about 683 and 5[%], respectively. We found that the leakage current of thin film capacitor is depend on RF power during deposition. Because of increase of activation energy, leakage current inclosed at high RF power and sheet resistivity of the films was decreased. Swithching voltage of thin film capacitor was 4.4[V]

• 한국ITS학회 논문지
• /
• 제7권5호
• /
• pp.97-105
• /
• 2008

반도체 공정의 미세화 및 마이크로 시스템 기술의 발전 그리고 소형 무선PAN 및 이동통신 장치들의 급증으로 인하여 전자부품들의 소형화와 직접화에 대한 요구가 지속적으로 증가되고 있다. 본 연구에서는 휴대형 무선PAN 및 이동통신용 전자회로 설계에 다양한 목적으로 널리 사용되고 있는 기저대역의 수동소자들 중 미세 커패시터의 안정성과 전기적 특성을 확보하기 위하여, 유전체인 AIN을 사용하여 MIM구조로 제작된 미세 박막 커패시터 소자의 전기적인 특성을 분석하고 기저대역에서의 성능을 평가한다. 또한 제작된 미세 박막형 커패시터의 용량제어 방법을 제시함으로서 기저대역에서 범용으로 사용할 수 있는 미세 박막 커패시터의 모델을 제시하고자 한다. 또한, 주파수 대역에 따른 MIM구조의 AIN 커패시터 특성을 분석함으로서 향후 임베디드 소자와 집적화를 위한 고정밀의 미세수동 소자로서의 활용방안을 제시하고자한다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권4호
• /
• pp.336-343
• /
• 1996

We have studied the preparation and the properties of $Ba_{1-x}$Sr$_{x}$TiO$_{3}$(BST) thin films by using the sol-gel method. Through the comparison of the effects of various solvents and additives in making solutions, we establish the production method of the stable solution which generates the high quality of BST film. We also set up the heat-treatment conditions for depositing the BST thin film through the TGA and XRD analyses. Through the comparison of the surface conditions of BST films deposited on Pt/Ta/SiO$_{2}$/Si and Pt/Ti/SiO$_{2}$/Si substrates, we find that Ta is more efficient diffusion barrier of Si than Ti so that Ta layer prevents the formation of hillocks. We fabricate the planar type capacitor and measure the dielectric properties of the BST thin film deposited on the Pt/Ta/SiO$_{2}$/Si substrate. Dielectric constant and dielectric loss tangent at 1V, 10kHz, and leakage current density at 3V of the BST thin film are 339, 0.052 and 13.3.mu.A/cm$^{2}$, respectively.ely.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.319-319
• /
• 2013

Even though the fabrication methods of metal oxide based thin film capacitor have been well established such as RF sputtering, Sol-gel, metal organic chemical vapor deposition (MOCVD), ion beam assisted deposition (IBAD) and pulsed laser deposition (PLD), an applicable capacitor of printed circuit board (PCB) has not realized yet by these methods. Barium Strontium Titanate (BST) and other high-k ceramic oxides are important materials used in integrated passive devices, multi-chip modules (MCM), high-density interconnect, and chip-scale packaging. Thin film multi-layer technology is strongly demanded for having high capacitance (120 nF/$mm^2$). In this study, we suggest novel multi-layer thin film capacitor design and fabrication technology utilized by plasma assisted deposition and photolithography processes. Ba0.6Sr0.4TiO3 (BST) was used for the dielectric material since it has high dielectric constant and low dielectric loss. 5-layered BST and Pt thin films with multi-layer sandwich structures were formed on Pt/Ti/$SiO_2$/Si substrate by RF-magnetron sputtering and DC-sputtering. Pt electrodes and BST layers were patterned to reveal internal electrodes by photolithography. SiO2 passivation layer was deposited by plasma-enhanced chemical vapor deposition (PE-CVD). The passivation layer plays an important role to prevent short connection between the electrodes. It was patterned to create holes for the connection between internal electrodes and external electrodes by reactive-ion etching (RIE). External contact pads were formed by Pt electrodes. The microstructure and dielectric characteristics of the capacitors were investigated by scanning electron microscopy (SEM) and impedance analyzer, respectively. In conclusion, the 0402 sized thin film multi-layer capacitors have been demonstrated, which have capacitance of 10 nF. They are expected to be used for decoupling purpose and have been fabricated with high yield.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.197-197
• /
• 2008

There are fast growing demands for new dielectric materials for passive capacitors of RF-ICs and other wireless applications. One of the bulk microwave dielectric materials which have superior properties is $ZrTiO_4$ due to its large dielectric constant and high quality factor. Therefore, $ZrTiO_4$ is worth studying as a form of thin film to be applied for passive capacitors of integrated circuits. In this study, we fabricated metal-insulator-metal type capacitors with $ZrTiO_4$ dielectric thin film, and evaluated their capacitor properties.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.412-415
• /
• 2003

[ $Si_3N_4$ ] thin film is the good material to fabricate the capacitors at MMIC processes. Normally, $Si_3N_4$ thin films is used to dielectric in the MIM capacitor and film thickness is $2000\;{\AA}$. Insulator(or dielectric) was deposited by PECVD at our MIM structure with air bridge which connect between top metal and contact pad. We optimized PECVD process to fabricate the good capacitors which can be applied at the true MMIC. The thickness of our $Si_3N_4$ thin films was $1000\;{\AA}$ shallower than $2000\;{\AA}$, and their breakdown voltages were above 70V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.660-663
• /
• 2001

The devices of BST thin films to composite (Ba$\_$0.7/ Sr$\_$0.3/)TiO$_3$using sol-gel method were fabricated by changing of the depositing layer number on Pt/Ti/SiO$_2$/Si substrate. The thin film capacitor to be ferroelectric devices was investigated by structural and electrical properties. The thickness of BST thin films at each coating numbers 3, 4 and 5 times was 2500[${\AA}$], 3500[${\AA}$], 3800[${\AA}$]. The dielectric factor of thin film when the coating numbers were 3, 4 and 5 times was 190, 400 and 460 on frequency 1[MHz]. The dielectric loss of BST thin film was linearly increased by increasing of the specimen area.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1001-1007
• /
• 2001

In this study, high dielectric materials, (Pb,La)Ti $O_3$ thin films were fabricated by PLD (Pulsed Laser Deposition) method and investigated in terms of structural and electrical characteristics in order to develope the dielectric materials for the use of new capacitor layers of Giga bit-level DRAM. The deposition conditions were examined in order to fabricate uniform thin films through systematic changes of oxygen pressures and substrate temperature. The uniform thickness and smooth morphology of (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films were obtained at the conditions of substrate-target distance 5.5[cm], laser energy density 2.1[J/$\textrm{cm}^2$], oxygen pressure 200[mTorr] and substrate temperature 500[$^{\circ}C$]. After the (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films were fabricated under the above conditions, they were post-annealed by RTA process in order to increase the dielectric constant. The film thickness of 1200 [$\AA$] had dielectric constant 821. Assuming that operating voltage is 2V, leakage current density of (P $b_{0.72}$L $a_{0.28}$)Ti $O_3$ thin films would result into 10$^{-7}$ [A/$\textrm{cm}^2$] and satisfied the specification of 256M DRAM planar capacitor, 4$\times$10$^{-7}$ [A/$\textrm{cm}^2$]m}^2$]

• 한국항행학회논문지
• /
• 제16권6호
• /
• pp.1038-1043
• /
• 2012

본 연구에서는 재구성 RF 회로 설계 응용을 위해 BZN/BST/BZN 다층 유전체를 이용한 고-가변 커패시터를 설계 및 그 특성을 측정하였다. 고-가변 특성의 BST계 강유전체와 저-손실 특성의 BZN계 상유전체를 이용하여 47%의 가변성과 0.005의 $tan{\delta}$ 값을 갖는 저-손실 고-가변 BZN/BST/BZN 다층 유전체를 제작하였다. 이 다층 유전체를 이용하여 quartz 기판 위에 $327{\times}642{\mu}m2$ 크기로 제작된 가변 커패시터 칩은 15 V의 인가전압과 800 MHz 주파수에서 Q-factor가 10이고 60 %의 가변율을 달성하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.640-643
• /
• 2008

In this work, a novel tunable MIM capacitor with the meshed electrode is proposed first in order to improve the tunability characteristics using fringe fields. The capacitors were fabricated on a low-resistivity Si substrate employing lead zinc niobate (PZN) thin film dielectric. The fabricated capacitor with the meshed electrode, whose line width and spacing was $2.5{\mu}m$, achieved the effective capacitance tunability of 31 % that is higher value of 18.5 % than that of the conventional capacitor with the rectangular-type electrode.