• 한국세라믹학회지
• /
• 제34권3호
• /
• pp.241-248
• /
• 1997

RuO2 박막은 SiO2(1000$\AA$)Si와 MgO(100) 단결정 위에 낮은 증착온도에서 hot-wall MOCVD법으로 증착시켰다. 그리고 박막의 특성에 미치는 공정변수의 영향을 고찰하였다. 25$0^{\circ}C$의 비교적 낮은 온도에서부터 RuO2의 단일상을 얻었으며 SiO2(1000$\AA$)Si위에 증착된 RuO2박막은 무질서한 배향을 보이는 반면 MgO(100)단결정 위에 증착시킨 RuO2박막의 경우에는 (hk0) 배향성을 보이는 것을 관찰하였다. 증착온도가 증가함에 따라 RuO2박막의 결정성은 증가하였고 전기적 비저항은 감소하였다. O2유량이 감소함에 따라 RuO2박막의 비저항은 감소하였으며, 증착온도 35$0^{\circ}C$, O2 유량 50sccm에서 증착된 두께 2600$\AA$-RuO2박막의 비저항은 52.7$\mu$$\Omega$-cm이었으며 이는 고 유전물질의 하부전극으로 이용하기에 적합하다.

• 한국전자파학회논문지
• /
• 제15권8호
• /
• pp.781-787
• /
• 2004

본 논문에서는 셀룰러/PCS/IMT-2000서비스를 동시에 수용할 수 있는 기지국용 다중대역 평판 안테나를 설계 및 제작하였다. 설계된 안테나는 두 개의 유전체 층과 폼 물질로 구성되었고 마이크로스트립 패치의 길이 방향과 너비 방향에 노치가 삽입되었다. 안테나의 광대역 특성을 위해서, 공진 개구면을 가지는 개구면 결합 안테나에 폼 물질을 사용하였으며, 패치의 너비 방향에 노치를 삽입하여 이중 공진 특성을 얻었다. 이를 통해, 광대역 특성을 유지하면서 주파수비( $f_{H/}$ $f_{L}$)가 1:2를 넘는 이중 공진 특성을 얻을 수 있었다. 설계된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러/PCS/IMT-2000 대역을 모두 만족하였고 측정된 안테나의 대역폭은 전압정재파비 1.5 이하로 셀룰러 대역에서 77 MHz, PCS/IMT-2000대역에서 550 MHz이며, 이득은 전 대역에서 약 5.65 dBi에서 7.4 dBi를 얻을 수 있었다.다.다.

• 한국전자통신학회논문지
• /
• 제12권5호
• /
• pp.783-790
• /
• 2017

본 연구에서는 무질서 효과가 고려된, 새로이 가정한 가상 결정 근사법을 갖는 empirical pseudopotential method를 사용하여 온도와 조성비 변화에 따른 3원계 질화물계 화합물 반도체 GaP1-xNx의 휨 매개변수 및 에너지 밴드갭을 계산하였다. 300K의 조성비 구간($0{\leq}x{\leq}0.05$)에서 에너지 밴드갭들이 급격히 감소하며, 해당하는 계산된 휨 매개변수가 13.1eV임을 알 수 있었다. 에너지 밴드갭 계산 결과로부터 굴절률 n과 실수부 유전상수 함수 ${\varepsilon}$를 계산하였고, 에너지 밴드갭 계산 결과는 실험치를 대체로 잘 설명하였다.

• 한국기계가공학회지
• /
• 제3권2호
• /
• pp.67-72
• /
• 2004

Electro-Rheological(ER) fluids consist of suspensions of fine polarizable particles In a dielectric oil, which upon application of an external electric field control take on the characteristics of the Bingham solid. In this study, the temperature dependence of the viscosity was Investigated for an ER fluid consisting of 35 weight % of zeolite particles in hydraulic oil 46cSt. Thermal activation analysis was performed by changing the ER fluid's temperature from $-10^{\circ}C$ to $50^{\circ}C$. According to the analysis, the activation energy for flow of the ER fluid was 79.6 kJ/mole without applying electric field. On the other hand, with the electric field of 2kV/mm, the linearity between viscosity and temperature was not existed By changing the temperatures the viscosity (or shear stress) versus shear rates were measured. In this experiment shear rates were increased from 0 to $200s^{-1}$ in 2 minutes. Generally, the hydraulic oil 46cSt will be operated at the temperature of about $40^{\circ}C$, thus, the ER fluid's electric field dependence of viscosity was examined at this temperature. Also, an influence of adding the dispersant(Carbopl 940) on ER effect was discussed.

• 공업화학
• /
• 제2권3호
• /
• pp.253-261
• /
• 1991

폴리이미드의 전구체인 폴리아믹산을 benzophenone tetracarboxylic dianhydride (BTDA)와 4, 4'-diamino diphenyl methane (MDA) 혹은 MDA와 3, 3'-dimethyl benzidine (OTB)의 혼합디아민과 용액축중합반응에 의하여 합성하였다. 반응용매로는 m-cresol과 m-cresol/xylene의 혼합용매를 사용하였다. TGA 분석 결과 폴리이미드 필름은 초기분해 온도가 $540^{\circ}C-590^{\circ}C$의 범위로서 내열성이 우수하였다. DSC 분석으로 중합체의 유리전이온도는 $340^{\circ}$ 이상임을 확인하였다. 폴리이미드 필름은 양호한 기계적, 전기적 물성값을 갖는 시료에서 인장강도가 $16Kg/mm^2$ 이상이었고, 절연파괴전압이 200 KV/mm 정도였다. 대체로 MDA 만을 디아민으로 사용한 단일중합체보다 MDA/OTB 공중합체의 물성이 우수하였고, m-cresol에서 합성한 중합체보다 m-cresol/xylene 혼합용매계에서 합성한 중합체의 물성값이 우수하였다.

• 한국대기환경학회지
• /
• 제30권6호
• /
• pp.577-585
• /
• 2014

A series of experiments using atmospheric-pressure non-thermal plasma coupled with transition metal catalysts were performed to remove ethylene from agricultural storage facilities. The non-thermal plasma was created by dielectric barrier discharge, which was in direct contact with the catalyst pellets. The transition metals such as Ag and $V_2O_5$ were supported on ${\gamma}-Al_2O_3$. The effect of catalyst type, specific input energy (SIE) and oxygen content on the removal of ethylene was examined to understand the behavior of the hybrid plasma-catalytic reactor system. With the other parameters kept constant, the plasma-catalytic activity for the removal of ethylene was in order of $V_2O_5/{\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ from high to low. Interestingly, the rate of plasma-catalytic ozone generation was in order of $V_2O_5/{\gamma}-Al_2O_3$ > ${\gamma}-Al_2O_3$ > $Ag/{\gamma}-Al_2O_3$, implying that the catalyst activation mechanisms by plasma are different for different catalysts. The results obtained by varying the oxygen content indicated that nitrogen-derived reactive species dominated the removal of ethylene under oxygen-lean condition, while ozone and oxygen atoms were mainly involved in the removal under oxygen-rich condition. When the plasma was coupled with $V_2O_5/{\gamma}-Al_2O_3$, nearly complete removal of ethylene was achieved at oxygen contents higher than 5% by volume (inlet ethylene: 250 ppm; gas flow rate: $1.0Lmin^{-1}$; SIE: ${\sim}355JL^{-1}$).

• 한국재료학회지
• /
• 제22권9호
• /
• pp.454-458
• /
• 2012

Various adhesive materials are used in flip chip packaging for electrical interconnection and structural reinforcement. In cases of COF(chip on film) packages, low temperature bonding adhesive is currently needed for the utilization of low thermal resistance substrate films, such as PEN(polyethylene naphthalate) and PET(polyethylene terephthalate). In this study, the effects of anhydride and dihydrazide hardeners on the low-temperature snap cure behavior of epoxy based non-conductive pastes(NCPs) were investigated to reduce flip chip bonding temperature. Dynamic DSC(differential scanning calorimetry) and isothermal DEA(dielectric analysis) results showed that the curing rate of MHHPA(hexahydro-4-methylphthalic anhydride) at $160^{\circ}C$ was faster than that of ADH(adipic dihydrazide) when considering the onset and peak curing temperatures. In a die shear test performed after flip chip bonding, however, ADH-containing formulations indicated faster trends in reaching saturated bond strength values due to the post curing effect. More enhanced HAST(highly accelerated stress test) reliability could be achieved in an assembly having a higher initial bond strength and, thus, MHHPA is considered to be a more effective hardener than ADH for low temperature snap cure NCPs.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.907-917
• /
• 2011

This study investigated the application of experimental design methodology to optimization of conditions of air-plasma and oxygen-plasma oxidation of N, N-Dimethyl-4-nitrosoaniline (RNO). The reactions of RNO degradation were described as a function of the parameters of voltage ($X_1$), gas flow rate ($X_2$) and initial RNO concentration ($X_3$) and modeled by the use of the central composite design. In pre-test, RNO degradation of the oxygen-plasma was higher than that of the air-plasma though low voltage and gas flow rate. The application of response surface methodology (RSM) yielded the following regression equation, which is an empirical relationship between the RNO removal efficiency and test variables in a coded unit: RNO removal efficiency (%) = $86.06\;+\;5.00X_1\;+\;14.19X_2\;-\;8.08X_3\;+\;3.63X_1X_2\;-\;7.66X_2^2$ (air-plasma); RNO removal efficiency (%) = $88.06\;+\;4.18X_1\;+\;2.25X_2\;-\;4.91X_3\;+\;2.35X_1X_3\;+\;2.66X_1^2\;+\;1.72X_3^2$ (oxygen-plasma). In analysis of the main effect, air flow rate and initial RNO concentration were most important factor on RNO degradation in air-plasma and oxygen-plasma, respectively. Optimized conditions under specified range were obtained for the highest desirability at voltage 152.37 V, 135.49 V voltage and 5.79 L/min, 2.82 L/min gas flow rate and 25.65 mg/L, 34.94 mg/L initial RNO concentration for air-plasma and oxygen-plasma, respectively.

• 한국세라믹학회지
• /
• 제48권4호
• /
• pp.323-327
• /
• 2011

The effects of $Dy_2O_3$ and $Er_2O_3$ co-doping on electrical properties and temperature stability of barium titanate ($BaTiO_3$) ceramics were investigated in terms of microstructure and structural analysis. The dielectric constant and the insulation resistance (IR) of 0.7 mol% $Dy_2O_3$ and 0.3 mol% $Er_2O_3$ co-doped dielectrics had about 60% and 20% higher than the values of undoped one, respectively, and the temperature coefficient of capacitance (TCC) met the X7R specification. The addition of $Dy_2O_3$ contributed to electrical properties caused by increase of tetragonality; however, preferential diffusion of $Dy^{3+}$ ions toward A site in $BaTiO_3$ grain exhibited an adverse effect on temperature stability by grain growth. On the other hand, The $Er_2O_3$ addition in $BaTiO_3$ could affect the TCC behavior and the IR with suppression of grain growth caused by reinforcement of grain boundary and electrical compensation. Therefore, the enhanced electrical properties and temperature stability through the co-doping could be deduced from the increase of tetragonality and the suppression of grain growth.

• 한국정보통신학회논문지
• /
• 제4권3호
• /
• pp.527-536
• /
• 2000

본 논문에서는 마이크로파용의 전계효과 트랜지스터를 사용한 저잡음 주파수 변환기의 설계에 대하여 논의한다. 높은 안정도의 유전체공진기를 사용하였고 중간주파수단에서 불필요한 발진을 막기위해 대역통과 여파기를 사용하였다. 공진 주파수가 12.3GHz인 마이크로스트립 안테나를 믹서와 함께 동일한 기판 위에 집적시켰으며 고전자 이동 트랜지스터 3개를 사용한 저잡음 증폭기를 안테나 뒤에 부가하였다. 국부발진기의 출력주파수는 Ku 대역용으로서 11.3GHz로 하였다. 측정결과 12.0GHz에서 12.7GHz에 걸쳐 약 7～12dB의 이득을 보였으며, 중간주파수단에서의 잡음지수는 6dB이었다. 설계된 모델은 다이오드형 믹서에 비해 변환손실이 적었으며, 디지털 방송 및 통신시스템에 적용될 수 있을 것이다.