• Child Health Nursing Research
• /
• v.6 no.1
• /
• pp.69-77
• /
• 2000

Oral medication is the most frequent treatment measure for follow up treatment, which is leading by childrens' parents for them. In medication for preoperational children, they tend to concentrate the result rather than the motivation or cause. So, they frequently refuse medication which has bitter taste. So this study was attempted to develop token economy program which promote children's medication and help their parents, and to evaluate its' effect to construct the experimental ground. This study was a quasi experimental study under the nonequivalent control group posttest only design. The subjects of this study were 36 children who were aged 3-6 years and admitted pediatric ward because of their respiratory disease. Token economy program was consisted of cartoon record paper with stickers which expresses the better medication is taken the more germs die, and gift was given for back up reinforcer. To evaluate this program, time for oral medication was measured to both experimental group and control group. To determine the effect of the program, the data were analyzed by the SAS 6.12 program with t-test. The results of this study were as follows: 1. Between experimental group and control group, there was no significant difference (t=-1.2411, P=0.2374). Therefore, the hypothesis of this study was rejected. In conclusion, the token economy program for follow up care didn't change the children's behavior of oral medication. But it was found that the cartoon on recording paper gave a pleasure to participated children. Parents who were in experimental group expressed their appreciation for token economy program. So it can be said that the token economy program for follow up care was effective in inducing the children's pleasure and parents' satisfaction even though it wasn't successful in experiment. If the measuring tools for token economy program was made with well planned design and high reliability, it can be improved the effectiveness of that To develope the theoretical bases of nursing care, the well planned programs and measuring tools for them should be developed.

• Child Health Nursing Research
• /
• v.5 no.3
• /
• pp.318-327
• /
• 1999

Oral medication is one of the most frequent treatment in clinical care. and frequently refused by children. Children's refusal spends unuseful time and require nurses'Patience. So this study was attempted to develop token economy Program which Promote children's medication. and to evaluate its' effect to construct the experimental ground. This study was a quasi experimental study under the nonequivalent control group non-synchronized design. The subjects of this study were 48 children who were aged 3-12 years and admitted pediatric ward because of their respiratory disease. Token economy program was consisted of cartoon record paper with stickers which expresses the better medication is taken the more germs die, and gift was given for back up reinforcer. To evaluate this Program. time spent for oral medication was measured six time to both experimental group and control group. and measured the perceived effectiveness of this program by nurses. To determine the effect of the program, the data were analyzed by the SAS 6.12 Program with t-test and mean, standard deviation. The results of this study were as follows: 1 In experimental group, time spent for oral medication was significantly shorter than in control group(t=5.24. p=0.0001). Therefore, the hypothesis of this study was strongly accepted. 2. Nurses perceived this program as an effective one(mean=3.125～3.792). The effectiveness occurred before. during and after medication as well as in parental responses, especially in using verbal dissatisfaction after medication. In conclusion. it was found that the token economy program for admitted children was effective in inducing the children's behavior of oral medication. There was no effectiveness in very highly anxious children Whereas, it is recommended that this program should not be used for such children until they settle down. If the token economy program was made in various situation with creative thinking, it will be very useful nursing measurement, especially in caring for children. To improve the qualify of nursing care, the various programs, which can give joyfulness to stressed patients should be developed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.502-510
• /
• 2018

In order to accumulate data to lower the friction coefficient of a press mold, tribological tests were performed before and after coating SM45C with a PVC/PO film and plasma coating (CrN, concept). The ultrasonic nanocrystal surface modification (UNSM)-treated material had a nano-size surface texture, high surface hardness, and large and deep compressive residual stress formation. Even when the load was doubled, the small amount of abrasion, small weight of the abrasion, and width and depth of the abrasion did not increase as much as those of untreated materials. A comparison of the weight change before and after the tribological test with the CrN and the concept coating material and that of the untreated material showed that the wear loss of the concept coating material and P-UNSM treated material (that is, the UNSM treated material treated with the concept coating) showed a tendency to decrease by approximately 55-75%. Concept 100N had a lower friction coefficient of about 0.6, and P-UNSM-30-100N showed almost the same curve as concept 100N and had a low coefficient of friction of about 0.6. The concept multilayer coating had a thickness of $5.32{\mu}m$. In the beginning, the coefficient of friction decreased because of the plasma coating, but it started to increase from about 250-300 s. After about 350 s, the coefficient of friction tended to approach the friction coefficient of the SM45C base metal. The SGV-280F film-attached test specimen was slightly pushed back and forth, but the SM45C base material was not exposed due to abrasion. The friction coefficient was 0.22, which was the lowest, and the tribological property was the best in this study.

• Design & Manufacturing
• /
• v.16 no.4
• /
• pp.52-59
• /
• 2022

Currently, Korea is an aging society and is expected to become a super-aged society in about four years. X-ray devices are widely used for early diagnosis in hospitals, and many X-ray technologies are being developed. The development of X-ray device technology is important, but it is also important to increase the reliability of the device through accurate data management. Sensor nodes such as temperature, voltage, and current of the diagnosis device may malfunction or transmit inaccurate data due to various causes such as failure or power outage. Therefore, in this study, the temperature, tube voltage, and tube current data related to each sensor and detection circuit of the diagnostic X-ray imaging device were measured and analyzed. Based on QC data, device failure prediction and diagnosis algorithms were designed and performed. The fault diagnosis algorithm can configure a simulator capable of setting user parameter values, displaying sensor output graphs, and displaying signs of sensor abnormalities, and can check the detection results when each sensor is operating normally and when the sensor is abnormal. It is judged that efficient device management and diagnosis is possible because it monitors abnormal data values (temperature, voltage, current) in real time and automatically diagnoses failures by feeding back the abnormal values detected at each stage. Although this algorithm cannot predict all failures related to temperature, voltage, and current of diagnostic X-ray imaging devices, it can detect temperature rise, bouncing values, device physical limits, input/output values, and radiation-related anomalies. exposure. If a value exceeding the maximum variation value of each data occurs, it is judged that it will be possible to check and respond in preparation for device failure. If a device's sensor fails, unexpected accidents may occur, increasing costs and risks, and regular maintenance cannot cope with all errors or failures. Therefore, since real-time maintenance through continuous data monitoring is possible, reliability improvement, maintenance cost reduction, and efficient management of equipment are expected to be possible.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.81-94
• /
• 1971

This research is conducted to study the effect to rebbuding, death atop, yielding and occurrence of twig blight disease with the interemediate cutting periods of mulberry branch and at the picking levels of leaf remains in autumn. The results obtained are as follows: 1. Re-budding branches are decreased with delaying of interval cutting period, and that more leaves remained lesser both re-budding branches and buds are observed. Therefore, it is better that leaves remained are placed on the upper part of branch, practically with 3-5 leaf remains. It has decreased re-budding branches, in case cutting is conducted in Sept. 20 with picking leaving 3-5 leaf on. 2. With regard that all picking increases the percentage of death atop of the branch and upper half part picking increases slightly over the other treats. Although it seems unlikely to be different in the other treats with cutting period, exception of all picking, it is elucidated better that the all picking after cutting in Sept. 15 represents unusually high, seemingly effected by the temperature contition preferable to the life of twig blight disease along with the lack of branch nutrition caused by the all picking. 3. In view of yielding, it has no difference in autumn yielding with cutting period, but more picking levels of leaf remains, more yielding. In spring yield, both no picking and all picking is the lowest, in spite of cutting period. Each treat produces high yielding except the no picking if rutting is done in Sept. 15 and Sept. 20, respectively; otherwise it is done earlier or later, each treat produces low yielding. It is suggested that yielding ability in following spring affected by the autumn picking because all picking treats represent lower yielding ability than no picking ones except of cutting in Sept. 15 and Sept. 20. With respect to total yield in spring and autumn, it is represented that other treats, among which cutting in Sept. 15 and Sept. 20 is especially high, produce higher yielding than both no picking and all picking. But no difference seemed in leaf remained treats. In these respects, it may be concluded that 3-5 leaf remains after the interval cutting in Sept. 15 to Sept. 20 increases the yielding throughout two seasons and it is suggested that 3-5 leaf remains after cutting in Sept. 5 to Sept. 10 has no difference with no picking and cutting after that day. 4. Diseases in the branch remained are twig blight, massaria-bye, and Die-back, of which twig blight attacks tremendously and slight ouurence in messaria-byo and Die-back. In ouurence of twig blight, it is appeared much in all picking and seasonal occurence high in Sept. 15 with 92.9, and in Sept. 30 with 100 as index, respectively. Also it occurs ,considerably in upper part picking but little occurrence in no picing. 5. It is considered that negative correlation among re-budding percentage. No. of re-budding leaf, and spring yielding is found, seemingly without heavy correlation at -0.42, and -0.27, respectively. However, death atop of branch and occurence of twig blight has little correlation with spring yield. On the other hand, positive correlation highly appeared with the correlation coefficient at 0.8 between occurence of twig blight and death atop of branch.

• Korean Journal of Hospice Care
• /
• v.6 no.1
• /
• pp.1-11
• /
• 2006

There are various understandings how to define death. In the context of medicine, death is defined as the irreversible change of the tissue according to the cessation of circulation and respiration. According to the psychologists, a person need to accept the finiteness as a human being and remain conscious that the death is not avoidable. And they say if a person doesn't regard death as unavoidable reality of life he or she will not confront the humanistic death and after all will die like animals. In philosophy, death is viewed as an unwelcome reality in the end of the journey of life. Sociologists usually understand that the society is the organization composed with living persons and human beings which construct and transmit the culture from generation to generation between the both ends of life and death. In society, the generation is changed, maintained, and developed through the phenomenon of death. Although death of human being is natural event in society, the death of a specific person brings a sense of loss, crisis, and anxiety to the communities like family, regional society, nation, and the world. In this context, death is not confined to personal dimension and it can be regarded as a social problem. It is valuable to summarize the religious perspectives on the meaning of death for the better hospice care. In shamanism, there are basic idea that although the flesh of human being disappears, soul never die. If human dies, the flesh of human being disappears but soul never disappear and come back to the origin of soul as it is called chaos. So in shamanism, it is said that shaman can solve the mortified feeling, restore the broken harmony, send the soul to comfortable space- the origin, and guarantee the blessing of descendents. Buddhists regard the death as an essential component through the cycles of life. Through this cycle, human being exits as an endlessly transmigrating being and the death is just a restoration to the original status. In Confucianism, the view on the death based on the philosophy of the "Yin and Yang" and "Five elements". In Buddhist tradition, many believers said the philosophy of "Death is the same as life". Unlike usual thoughts that a god governs "life and death" and "fortune and misfortune", Confucianists deny the governance of a god and emphasize the natural orders in which every phenomenon in the world moves according to the principle. Confucianists understand the death as a natural order with this principle. In Confucianists' belief, the essence of human being remains in their own descendent's lives after the death of ancestor, so in Confucianism there is no concept of immortality of the soul. In the history of Christianity, death has been defined generally as the separation of the immortal soul from the mortal body. In the earlier days of Old Testament, the death is regarded as a disappearance of just a flesh and human never disappear and always live in the relationship with God. Later days in Old Testament, we can find the growing concern for the life after the death because of the entrance of the theodicy. In the New Testament, the death is not regarded as the normal process of the human life and regarded as the abnormal status in which death come to human because of sin as a decisive factor and it should be conquered. In fact, the most of us afraid death because not of the fear of death itself but of the sense of the emptiness and regrets. so many people often make the monument hoping to live forever. But Christian usually regard this behavior as a sinful act because human being usually think themselves as a master of their life and attempt to become immortal in this kind of trial mortal. But if we live with God, we cannot confront such a condition because we aware limits as a mortal human being and entrust everything on Him and want to live according to His guidance. Therefore, in the Christian tradition, the death is regarded as accomplishment of life, fruits of life, invitation to the eternal life, and the last stage of human growth. For human being, the death is the great step of maturation as a human in the final stage of life.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.12 s.354
• /
• pp.55-64
• /
• 2006

This work proposes a calibration-free 14b 70MS/s 0.13um CMOS ADC for high-performance integrated systems such as WLAN and high-definition video systems simultaneously requiring high resolution, low power, and small size at high speed. The proposed ADC employs signal insensitive 3-D fully symmetric layout techniques in two MDACs for high matching accuracy without any calibration. A three-stage pipeline architecture minimizes power consumption and chip area at the target resolution and sampling rate. The input SHA with a controlled trans-conductance ratio of two amplifier stages simultaneously achieves high gain and high phase margin with gate-bootstrapped sampling switches for 14b input accuracy at the Nyquist frequency. A back-end sub-ranging flash ADC with open-loop offset cancellation and interpolation achieves 6b accuracy at 70MS/s. Low-noise current and voltage references are employed on chip with optional off-chip reference voltages. The prototype ADC implemented in a 0.13um CMOS is based on a 0.35um minimum channel length for 2.5V applications. The measured DNL and INL are within 0.65LSB and l.80LSB, respectively. The prototype ADC shows maximum SNDR and SFDR of 66dB and 81dB and a power consumption of 235mW at 70MS/s. The active die area is $3.3mm^2$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.33 no.5 s.112
• /
• pp.69-82
• /
• 2005

These studies were carried out (1) to investigate the growth characteristics of Sedum album L. in the field, (2) to propose a suitable shallow peen roof system for this plant, and (3) to evaluate plant growth in the proposed system over the long term. The growth characteristics, such as morphological properties, growth habit, shade tolerance, and flowering, were surveyed. In experimental shallow green-roof systems, the effects of drainage type, substrate type, and soil depth on plant growth were investigated. Then drought tolerance was investigated. After planting Sedum album L. in the proposed system survival rate, cover, and resistance to insects, heal and cold were evaluated for about 2 years. The results of these studies are summarized below. 1. In the field, the aboveground part of Sedum album L. did not die back during the winter. Plant height was 4$\sim$7 cm. Roots were distributed to a depth of 5$\sim$7 cm. Sedum album L. is a compact ground-cover plant that spreads vigorously. Shading condition of less than $30\%$ of full sunlight didn't cause any trouble, but shading conditions above $87\%$ made the shape of the shoots and leaves abnormal. The plant bloomed from June to August and had a rather large compound umbel of white, star-shaped flowers. 2. Two systems, a drainage-blend-10 cm soil depth and a reservoir$\cdot$drainage-blend-15 cm soil depth, performed best in terms of cover, fresh weight, and dry weight. The first has an advantage for green roofs because it is lighter than the latter. 3. In drainage-blend-10 m soil depth and modified reservoir · drainage-blend-10 cm soil depth system no plants died for about 4 months after stopping the irrigation. The visual quality of the latter system was above 5 for 4 months and that of the former was under 5 after 2 months. In the field, however, the drought tolerance of Sedum album L. grown in the former would be enough to withstand the dry season. Considering the urban ecosystem and the importance of healthy growth the modified reservoir $\cdot$ drainage-blend-10 cm soil depth system was finally recommended. This system was composed of a 4 cm thick drainage layer and drain outlets placed at a height of 2.5 cm. 4. In the proposed system, the survival rate was $100\%$, and there was no injury induced by insects and heat. The leaf density decreased a little in winter. Cover increased throughout the year. Sedum album L. was planted with a cover of 72$cm^{2}$ on 3 April 2003; on 16 June 2003 and 15 June 2004, cover was $132.66\pm$5.87 $cm^{2}$(1.8 times) and $886.98\pm$63.51 $cm^{2}$(12.3 times), respectively.

• Journal of Forest and Environmental Science
• /
• v.30 no.2
• /
• pp.189-200
• /
• 2014

The tropical wet evergreen, tropical semi evergreen and moist deciduous forest types are projected to be impacted by climate change. In the Western Ghats region, a biodiversity hotspot, evergreen forests including semi evergreen account for 30% of the forest area and according to climate change impact model projections, nearly a third of these forest types are likely to undergo vegetation type change. Similarly, tropical moist deciduous forests which account for about 28% of the forest area are likely to experience change in about 20% of the area. Thus climate change could adversely impact forest biodiversity and product flow to the forest dependent households and communities in Uttara Kannada district of the Western Ghats. This study analyses the distribution of non-timber forest product yielding tree species through a network of twelve 1-ha permanent plots established in the district. Further, the extent of dependence of communities on forests is ascertained through questionnaire surveys. On an average 21% and 28% of the tree species in evergreen and deciduous forest types, respectively are, non-timber forest product yielding tree species, indicating potential high levels of supply of products to communities. Community dependence on non-timber forest products is significant, and it contributes to Rs. 1199 and Rs. 3561/household in the evergreen and deciduous zones, respectively. Given that the bulk of the forest grids in Uttara Kannada district are projected to undergo change, bulk of the species which provide multiple forest products are projected to experience die back and even mortality. Incorporation of climate change projections and impacts in forest planning and management is necessary to enable forest ecosystems to enhance resilience.