• Korean Journal of Optics and Photonics
• /
• v.26 no.2
• /
• pp.110-114
• /
• 2015

We propose a reflective cholesteric liquid crystal cell with reduced color shift, using dichroic dyes. Color-shifted light is absorbed by dye molecules in the proposed dye-doped cholesteric liquid crystal (DDCLC) cell. We have shown that the color shift can be reduced by increasing the concentration of dye molecules in the proposed DDCLC cell.

• Polymer(Korea)
• /
• v.35 no.5
• /
• pp.458-466
• /
• 2011

In the mixed system of supercritical carbon dioxide/organic solvents, poly(vinyl alcohol)(PVA) film of high degree of hydrolysis could be dyed with a dichroic dye of C. I. direct black 22(DB22) and as a result, high durability was obtained. Especially, as a dye dispersant in a supercritical fluid phase, a mixed solvent system of ethylene glycol: dimethyl sulfoxide=4 : 6 weight ratio was investigated. Then the optimum pressure for dyeing could be reduced down to 200 bar. Using this supercritical fluid system, the maximum dyeing appeared as the transmittance of less than 1% and the waste amount was reduced to the level of 1/10. After 500% drawing of this PVA film, both the polarizing efficiency of 94% and the single piece transmittance of 30% were obtained. The limitation of DB22 and further improvements were also discussed.

• Journal of the Korean Applied Science and Technology
• /
• v.19 no.3
• /
• pp.245-249
• /
• 2002

A (disk-like liquid crystal (DLC) monomer/liquid crystals(LCs)/chiral dopant/dichroic dye) composite was irradiated with ultraviolet (UV) light. The (DLC network/LCs/chiral dopant/dichroic dye) was formed in the homeotropically oriented smectic A(SA) phase by the surface orientation treatment and the electric field. A focal-conic texture exhibiting strong light scattering appeared in the heat-induced chiral nematic phase(N${\ast}$) of the composite upon heating. Thermo-recording in the composite system has been realized by using a He-Ne laser. The laser irradiation was induced the phase transitions from SA phase to chiral nematic(N${\ast}$) phase in the composite system.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.66-73
• /
• 2013

Three reactive dichroic dyes with 3,5-dichloro-2,4,6-triazine moiety were synthesized by reaction between dichroic dyes (such as congo red, direct black 22 or direct black 4) and cyanuric chloride. Poly(vinyl alcohol) (PVA) films were dyed with the obtained three reactive dichroic dyes. After 400% drawing of the PVA films, their optical properties were compared with an iodine-doped PVA film prepared in the same condition. Durability test was performed at $50^{\circ}C$ in 85% of relative humidity for 120 hrs. We found that compared with the iodine-doped PVA polarizing film, the relative durability of the PVA polarizing film dyed with the reactive dichroic dyes was greatly improved.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.8
• /
• pp.2190-2194
• /
• 2010

Development of the methods to organize zeolite microcrystals into closely packed and uniformly aligned monolayers on various substrates have been pursued viewing microparticles as a novel class of building blocks. We now report that the vertically aligned zeolite monolayer can be applied as novel supramolecularly organized systems for anisotropic photoluminescence in high dichroic ratio, to study energy transfer dynamics between the internal and external fluorophores, and to develop zeolite-based advanced materials. Study of polarized fluorescence spectroscopy and angle-dependent intensity change with dye molecules in different surroundings further provides insight into molecular interactions that can be used for the future design of optoelectronic device in nanometer size. In addition, this report shows that isolating of organic dye through surface treatment is crucial for preventing the egress of the incorporated dye molecules from the channels of zeolite to the solution and to enhance the anisotropic luminescence.

• Journal of Information Display
• /
• v.12 no.1
• /
• pp.17-21
• /
• 2011

Aliquid crystal (LC) device switchable between the reflective and transmissive modes without sub-pixel division is proposed. By using dye-doped nematic LCs for the top LC layer, transflective displays with high reflectance were realized. It is expected that the proposed device can be applied to high-reflectance transflective devices for outdoor applications.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.671-678
• /
• 2001

Sodium and zinc salts of poly(ethyaene-co-methacrylic acid) ionomers consist of three phases, i.e. ionic aggregates, amorphous, and crystalline phases. Dye molecules after soaked from the methanol solution are located near the amorphous phase or ionic aggregates within ionomer films. Depending on the location of the molecules in the ionomer film, they are under influence of dispersion forces (ethylene parts), polar forces (acid parts). and ionic dipole (ionic aggregates) interactions. The UV/Vis absorption peak of Nile Red under the dispersion force is found at near 500 nm, for the dye under the polar force effect 525 nm, and 550 and 610 nm for the dyes under $Na^+$ and $Zn^{2+}$ ionization effects, respectively. Since the divalent $Zn^{2+}$ ion has larger ionic dipole than the monovalent $Na^+$ ion, the larger red-shift of the absorption band due to the ionic dipole interaction is observed for $Zn^{2+}$ counter ion.

• Journal of Adhesion and Interface
• /
• v.13 no.3
• /
• pp.131-136
• /
• 2012

In this study, commercial poly(vinyl alcohol) (PVA) film was dyed with reactive dichroic dyes under mild conditions using organic solvents in stead of strong basic aqueous solution. After drawing of 500% of this PVA film, the polarizing efficiency and the single piece transmittance were measured. The degree of saponification of the commercialized PVA film was determined by using NMR and FT-IR spectromety. The commercial PVA film, with ca. 100% of the degree of saponification determined by NMR spectrometry, was dyed with the reactive dichroic dyes, which have 3,5-dichloro-2,4,6-triazine moiety. As a result, we found that the PVA film dyed with the reactive congo red showed relatively good polarization efficiency, and the PVA film dyed with the reactive direct black 22 exhibited relatively good single piece transmittance.

• Applied Biological Chemistry
• /
• v.46 no.4
• /
• pp.305-310
• /
• 2003

Hydrophobic core variant of ubiquitin appeared to have partially folded structure at pH around 2. The intrinsic tryptophan fluorescence emission maximum of this ubiquitin variant at pH 2 showed slight blue shift compare to that of unfolded state, suggesting that some residual tertiary structures remain in this solvent condition. At the same solvent condition, this ubiquitin variant binds with hydrophobic dye, 8-anilinonaphthalene-1-sulfonic acid(AMS), which is known to bind to exposed hydrophobic surface. Furthermore, far-UV circular dichroic spectrum of this ubiquitin variant in the diminished pH was remarkably different from the far-UV CD spectrum of the native state or unfolded state. Based on the molar ellipticity at 220 nm, this ubiquitin variant at pH 2 appeared to have significant amount of secondary structures. All these observations suggest that this ubiquitin variant in the diminished solvent pH has loosely folded hydrophobic core with some secondary structures, which are key features of molten globule conformation. Since molten globule has long been considered as a protein folding intermediate, it is considered that this hydrophobic core variant ubiquitin will serve as a valuable model to study protein folding process.

• Journal of Information Display
• /
• v.9 no.4
• /
• pp.11-14
• /
• 2008

A highly efficient organic light-emitting diode (OLED) with an in-cell polarizer made of an imprinted liquid crystalline polymer (LCP) layer doped with dichroic dye molecules is presented. The in-cell polarizer was found to be capable of effectively polarizing the emission light of the OLED and of significantly improving the luminance through the periodic microstructures fabricated using an imprinting method. This type of OLED with an imprinted in-cell polarizer is useful for efficient light source applications in liquid crystal displays (LCDs).